Thank you for sharing the knowledge and experience. I am adding PPF to my detailing service offerings later this year. The tools list is brilliant. I also like to use tools in non-traditional ways.
Ron thank you for this informative video, super helpful. I picked up the Fiskar scissors because of you, and it’s now one of my favorite tools. I also got the heat gun attachment and the pro bond adhesive promoter that you recommended as well.
Is that the same Mike Sanchez from down in the valley there in Texas. ? I think I've met him a couple of times at Ray Levy's, when he was with 3M, and then Sungard. Way before Madico bought them. Anyway, we're a Suntek in the white mountains of AZ. We're solid in the tinting,and while being exposed to the PPF industry never pursued it full time. Well as fare would have it were moving into PPF. What is your perhaps mix for your tack solution and what angle is on those blades your using. Enjoyed the video new subscriber. Take care.
www.amazon.com/Ultra-Thin-Permanent-Double-Sided-Photography-Scrapbooking/dp/B01NBJVU04/ref=sr_1_3?crid=1EQHD2ZFVBKZR&keywords=double+sided+banner+tape&qid=1581682494&sprefix=double+sided+banner%2Caps%2C159&sr=8-3 I use the product linked above for a lot of stuff as well as the standard 3M automotive trim tape.
We use a product called Spider Spit. 1/2 to 3/4 of an oz. in a 3 gallon tank.. You can pick it up at 44 tools. Most of the time they are out of anything smaller than a gallon.
I use NT Cutter carbon blades from Japan. www.amazon.com/NT-CUTTER-Precision-100-Blade-BD-2000/dp/B003B3F0SK/ref=pd_cp_79_2/135-7074973-3572706?_encoding=UTF8&pd_rd_i=B003B3F0SK&pd_rd_r=60437ae0-24bf-422e-a662-8063dfba8811&pd_rd_w=SzQ5i&pd_rd_wg=vfaLt&pf_rd_p=0e5324e1-c848-4872-bbd5-5be6baedf80e&pf_rd_r=PR9PQ13E7T4JWQ48Q2PR&psc=1&refRID=PR9PQ13E7T4JWQ48Q2PR
@RCF Song You sure can we offer onsight training. It's a lot more than just bulk installing. I teach how to use patterns to there full potential. If you're using TrueCut I can teach you how to better understand and use it as well. Send an email to contactronharris@gmail.com or ppfacademy.info@gmail.com and I'll get with you about prices and availability. Classes are two day minimum and you can get trained on paying customers vehicles.
Very informative Ron!
WOW, Great tips and tricks, Thanks for sharing! A lot of great stuff!
Thanks for sharing your knowledge. I can really tell you are a master of your craft.
Excellent- thanks
Fusion tool heat gun works amazing also.
Thank you for sharing the knowledge and experience. I am adding PPF to my detailing service offerings later this year. The tools list is brilliant. I also like to use tools in non-traditional ways.
It’s awesome that you’re thinking outside the box.
Ron thank you for this informative video, super helpful. I picked up the Fiskar scissors because of you, and it’s now one of my favorite tools. I also got the heat gun attachment and the pro bond adhesive promoter that you recommended as well.
Great vid, really open and helpful unlike some stuck up vids that reveal nothing, thanks buddy.
hi Ron. What is the orange tape that you put on the HG400 heatgun. Did it come that way?
Hey man,,, great video, what kind of sleve did you put on the heat air gun?, the propane one
Is that the same Mike Sanchez from down in the valley there in Texas. ? I think I've met him a couple of times at Ray Levy's, when he was with 3M, and then Sungard. Way before Madico bought them. Anyway, we're a Suntek in the white mountains of AZ. We're solid in the tinting,and while being exposed to the PPF industry never pursued it full time. Well as fare would have it were moving into PPF. What is your perhaps mix for your tack solution and what angle is on those blades your using. Enjoyed the video new subscriber. Take care.
I’ll buy some of this right now!!!
Great video, do you have any links for some of the products? I really want to get a good pump sprayer!
Get this 5 gallon tank. I can’t work without it. 44tools.com/5-gal-tank-w-15-straight-hose-quick-disconnect-plastic-nozzle/
Info on the tape?
What did you wrap on the front of the torch
yep...absolutely...thanks for the great vid my man!!!
The best tools video.
What brand of double sided tape do you use?
What tools do you recommend for beginners getting into PPF?
What angle is in your carbon blades
Hey Ron, have you ever installed with a steamer vs a heat gun?
Which red dot handle and blade model angle are you using for PPF?
Hello, is that heat sensitive orange tape you wrapped the HG-400 with?
It helps to block the heat. From Fusion Tools
@@PaintProtectionFilmAcademy Nevermind found it!
@@PaintProtectionFilmAcademy Thank you!
How to make tack solution pls make a video
can you give us more info on the double sided tape?
www.amazon.com/Ultra-Thin-Permanent-Double-Sided-Photography-Scrapbooking/dp/B01NBJVU04/ref=sr_1_3?crid=1EQHD2ZFVBKZR&keywords=double+sided+banner+tape&qid=1581682494&sprefix=double+sided+banner%2Caps%2C159&sr=8-3
I use the product linked above for a lot of stuff as well as the standard 3M automotive trim tape.
What kind of soap do you use for your slip solutions,how much of soap do you put in ?
We use a product called Spider Spit. 1/2 to 3/4 of an oz. in a 3 gallon tank.. You can pick it up at 44 tools. Most of the time they are out of anything smaller than a gallon.
Hi, thanks for your really cool videos, do you prefer Spider Spit than Film On ? And sorry but can you write me you tack mix please , :-)
Link for the heater gun please
Go to Amazon and enter the following
Solder-It HG-400W Propane Heat Gun
What brand of carbon blade do you use please?
I use NT Cutter carbon blades from Japan. www.amazon.com/NT-CUTTER-Precision-100-Blade-BD-2000/dp/B003B3F0SK/ref=pd_cp_79_2/135-7074973-3572706?_encoding=UTF8&pd_rd_i=B003B3F0SK&pd_rd_r=60437ae0-24bf-422e-a662-8063dfba8811&pd_rd_w=SzQ5i&pd_rd_wg=vfaLt&pf_rd_p=0e5324e1-c848-4872-bbd5-5be6baedf80e&pf_rd_r=PR9PQ13E7T4JWQ48Q2PR&psc=1&refRID=PR9PQ13E7T4JWQ48Q2PR
@RCF Song the black 100 pack
@RCF Song You sure can we offer onsight training. It's a lot more than just bulk installing. I teach how to use patterns to there full potential. If you're using TrueCut I can teach you how to better understand and use it as well. Send an email to contactronharris@gmail.com or ppfacademy.info@gmail.com and I'll get with you about prices and availability. Classes are two day minimum and you can get trained on paying customers vehicles.