I've got this case in black. Looks amazing in white with all the white parts as well! Awesome job, this really makes me want to upgrade some of my parts too.
Hardly perfect. I never understand Lian Li case, it's too thick, u need a bigger desk. It hides the PSU in the back so u can't see it, rgb or not. The worst part, u have to shell out more money for the excessive amount of fans. Meanwhile air flow cases such as Phanteks create a vacuum with only 5 fans. One of the best temperature ever. Not to mention Lian Li fans are very noisy. Put 10 together u get a rocket engine.
reverse flow, it’s set as 6 intake and 4 exhaust. yes there’s a stack on the aio but it still counts as 3 fans as they’re over eachother and both are intake. the one on the rear is reverse flow and it’s exhaust.@@JuztZack
Very clean, but was discussing the fans with a friend. With fans best to have outtakes at the top and back, intakes at the sides and bottom where warm air rises (top looks like both an outtake and intake)
I think it's a push pull config exhausting at the top. If he doesn't have the reverse blades it's probably exhaust at the back and intake on the bottom. I have the same setup but I have the back and bottom as intake.
@@melburnmt7320i have the same case and my fans are intake at the bottom and the side, exhaust at top and back. Its my first pc and idk if i managed to do it right. Though im using the reverse blades for the intakes so its all mirror like fans without those brackets on the regular intakes
How’s it going since Christmas I got every part for this build but instead better motherboard and lian li o11 dynamic mini snow I prefer the miniature look and aesthetic just need cpu and gpu and I’m done I hope you can get there aswell 🙏 Edit: I did also get the lian li vertical gpu mount
Love it! Doing this exact build (case/color/RAM). Looks spectacular...well done! I'm trying to figure out a way to position my cooler so it doesn't either sit on, or touch the RAM. Your cooler lines are on the opposite side, and closer since you're using the "push/pull" layout with your radiator. I may go that route, as well, if it gives my cooler tubing a bit more space. But, again, this looks absolutely beautiful!
Idk if anyone else commented this already, but I noticed you have 3 intake and 7 exhaust fans. Unless your side fans are reverse blade. You should switch your 3 side fans to intake. You’ll lose the view of the infinity side, unless you buy reverse blade fans. But you definitely want more intake fans than you currently have. This thing is probably a dust magnet! Other than that, beautiful build!
What do you mean 7 exhaust??? Those on the bottom and sides have to be intake. Also the top MUST be exhaust cuz else you would have a lot of dust in that pc 🖥
@@ItzTozlos The sides are on the exhaust side I think. Only 3 intake from the bottom. Also theres another 3 above the radiator. Theres literally 10 exhaust fans and 3 intakes by the look of it... Lol .. Not to mention the GPU has at least 2 fans.. This whole setup is way over kill. 4 sticks of RAM... like what are you trying to do with this setup lol
Beautiful build and lighting choice! If those aren't reverse flow fans on the side, it's a bit dumb, could do with reverse flow ones along the bottom as well. Looks great!
Heeey, it's so cuuuute ! i have the same config ! but I have a little problem, i don't know how to unsync the Strimer rgb like you. Every line of my strimer are sync. Can you tell me how to do this ? Thank you :)
Looks amazing, but I duno why people need 13 fans and 4 sticks of ram. 6-7 is plenty and 2x16gb ram is more than enough. Also why are 10 exhaust and 3 intake? Unless they are reversed.. but why not reverse the bottom as well.. A bit overkill
i noticed u have six fans in the aio what screws did u use to screw the top ones in? i'm trying to do the same but i don't want to get too short of screws lol
Hello m8. You did an amazing pc build. I have something similar with you. Is it possible to share the strimers rgb settings with L connect ? You are using the meteor preset ? Everytime L connect software runs the rgbs reset to the default. So i have to customize everything from the beginning. Is it the same for you?
Is a 4060 ti good? I know it’s not the best but it’s a cheaper option and I don’t have much money Btw it’s a prebuilt pc because I don’t know how to build a pc, I didn’t choose a random one, I searched for one with decent specs
Hi, im planning to get the same motherboard and Intel processor too. However, I'm a new builder and I'm figuring how you guys know what components to buy that are compatible?
Specs:
Mainboard: Asus ROG STRIX Z690-A GAMING WIFI D4
Ram: Corsair Dominator Platinum RGB 32GB 3200Mhz DDR4 (4x8GB)
SSD: Kingston KC3000 1TB
CPU: Intel Core i5 13600k
GPU: ASUS ROG Strix GeForce RTX 3080 White 10GB V2
PSU: ASUS ROG Strix 850G White Edition
AIO: NZXT Krazen z73 RGB White
Fan: LIAN-LI SL120 Infinity White x10
Case: LIAN-LI o11 Dynamic Evo White
Cable: LIAN-LI Strimer Plus RGB Cable (V2) 24pin + 3x8pin VGA
the rtx 4060 was a better option
A 4070, I MEANT A DAMN 4070!
@@ATGamingFRhell na , you trippin my boa
@@sebastianlipkowski412the 4070 or the ti version are both better than the 3080 i think ill have to double check though
Price ?
@@JaysTechh4070 ti beats 3090 ti😅
"Yes Mom, I need this for my power point presentation!"
Yeah 👍🏻
Yeah
Yea
Yeah
Agreed
I definitely need this PC for Microsoft Word and some AI learning Mom, trust me!
I think the lighting for the strimers should go in the other way, like power traveling through the cables. Cool little detail.
It's an easy change in the L-Connect settings to change directions :)
I've got this case in black. Looks amazing in white with all the white parts as well! Awesome job, this really makes me want to upgrade some of my parts too.
Where's the PSU? I wanna see the PSU it has rgb. This case is flawed.
@@fynkozari9271it’s a dual chamber computer case. It’s installed in the 2nd chamber (back side) where it can be hidden
@@gnogz2668 exactly, why would anyone hide PSU? True gamers see all of the components.
its not that serious lol@@fynkozari9271
@@fynkozari9271 pointless seeing the psu
Beautiful peace of art work! 😊
Peace or piece?
Dude idk how much time I watched this video over and over again, dream having a pc like that❤
could watch this whole day
It is illegal how beautiful this setup looks
Bro made heaven in a box
Definition of perfect pc. I can't find mistake here. Good job man❤
10 exhaust fans ☠️
Hardly perfect. I never understand Lian Li case, it's too thick, u need a bigger desk. It hides the PSU in the back so u can't see it, rgb or not. The worst part, u have to shell out more money for the excessive amount of fans. Meanwhile air flow cases such as Phanteks create a vacuum with only 5 fans. One of the best temperature ever. Not to mention Lian Li fans are very noisy. Put 10 together u get a rocket engine.
@@fynkozari9271yapperville
not noisy unless you go over 2000rpm.. which is for most fans anyways. @@fynkozari9271
reverse flow, it’s set as 6 intake and 4 exhaust.
yes there’s a stack on the aio but it still counts as 3 fans as they’re over eachother and both are intake. the one on the rear is reverse flow and it’s exhaust.@@JuztZack
Beautiful build congratulations 🎉
Very clean, but was discussing the fans with a friend. With fans best to have outtakes at the top and back, intakes at the sides and bottom where warm air rises (top looks like both an outtake and intake)
I think it's a push pull config exhausting at the top. If he doesn't have the reverse blades it's probably exhaust at the back and intake on the bottom. I have the same setup but I have the back and bottom as intake.
@@melburnmt7320i have the same case and my fans are intake at the bottom and the side, exhaust at top and back. Its my first pc and idk if i managed to do it right. Though im using the reverse blades for the intakes so its all mirror like fans without those brackets on the regular intakes
How do you know that he doesn’t
Looks amazing 👏
Omg that's just beautiful.
Damnnnnnnnnnnnnj beautiful build dude incredibly clean
I AM GOING TO BUY THIS BEAUTIFULL AESTHETIC PIECE OF ART IN NEXT 17 MONTHS . DATE -04-12-2023
How’s it going since Christmas I got every part for this build but instead better motherboard and lian li o11 dynamic mini snow I prefer the miniature look and aesthetic just need cpu and gpu and I’m done I hope you can get there aswell 🙏
Edit: I did also get the lian li vertical gpu mount
@@JustPigeon.what motherboard did you get
@@beambeam7443 rog strix b650 ddr5 amd 7000 series board it runs like a charm and looks fantastic in my all white build
how much is the total build cost
@@JustPigeon.
it has been 7 months now
That's the most beautiful thing I've ever seen and I'm barely 16 omg
Ooh the white aesthetic is my favourite and dream pc ever so good build
This is my dream pc ❤❤
Love it! Doing this exact build (case/color/RAM). Looks spectacular...well done! I'm trying to figure out a way to position my cooler so it doesn't either sit on, or touch the RAM. Your cooler lines are on the opposite side, and closer since you're using the "push/pull" layout with your radiator. I may go that route, as well, if it gives my cooler tubing a bit more space. But, again, this looks absolutely beautiful!
This is sick! Love it
cool! I will get one like it in about 2 months😀
Nice build!
I love it beautiful my guy 🎉
"Yes mom i need this for school."
Beautiful build!!!!!
Dream pc fr 😮💨
Need to try and get my GPU cables through the bottom like that!
Just hoping those front fans are reverse blades, otherwise they'd be exhaust too which isn't great for airflow and dust :)
Good job looks really good
Wow that looks so good
Idk if anyone else commented this already, but I noticed you have 3 intake and 7 exhaust fans. Unless your side fans are reverse blade. You should switch your 3 side fans to intake. You’ll lose the view of the infinity side, unless you buy reverse blade fans. But you definitely want more intake fans than you currently have. This thing is probably a dust magnet! Other than that, beautiful build!
What do you mean 7 exhaust???
Those on the bottom and sides have to be intake.
Also the top MUST be exhaust cuz else you would have a lot of dust in that pc 🖥
(Correct me if I you meant that cuz yo comment is a bit mixed-up.
@@ItzTozlos The sides are on the exhaust side I think. Only 3 intake from the bottom. Also theres another 3 above the radiator. Theres literally 10 exhaust fans and 3 intakes by the look of it... Lol .. Not to mention the GPU has at least 2 fans.. This whole setup is way over kill. 4 sticks of RAM... like what are you trying to do with this setup lol
@@LeSkateWA this is not mine if you mixed some thing up
@@ItzTozlos Yeah I know just wanted to rant about it 😅
Looks soooo great
Dream PC!
Very clean man
Its so fresh.
I am in love ❤
Cleanest pc
Cool build I just have a question, did you get 4 sticks for aesthetics even though 16gb*2 runs better?
Love your pc
Bro I love that now I want it very nice ❤❤❤❤
That Looks Awesome 😮
the white rgb on my white rog 3080 looks more like yellow lol, amazing build btw
Mine looks blue i don t know what to do to fix it
Planning on doing a pretty similar build but in black next year
Clean…. Which ram is that ?
Not this being over 1000 but it’s one of my dream items on my Amazon wish lists
Beautiful build and lighting choice! If those aren't reverse flow fans on the side, it's a bit dumb, could do with reverse flow ones along the bottom as well. Looks great!
What wires, ram and fan is that. Hella sick
that ram is so vibrant holy
if u put the 3 bottom on front panel than ur temps would drop hella like at least 5-10. esp the high performance noctua fans
10/10😊
Beautiful
I hope whoever reads this has a happy life.
it's hard
Thanks you too:)
SO CLEAN 🤍
👍👍👍👍
Instead pf spending of look, performance would be better option to spend on
do you mind sharing the list of items? this is gorgeous
pinned comment
Csk you please give me a cheaper version because u really like this build and the RGB
NOOO YOU FORGOT TO PEEL OFF THE STICKER ON THE FANN😭😭😭.
(its on the bottom right)
Very beautiful but what setup was used?
I need this set up so i can do Excel spreadsheet better
does anyone know what lian li rbg effect they used? looks amazing :)
😈🖤💙✨️🥶👍🏻
One ram stick is diffrent but other than that its amazing
it isnt its just the side of the ram
Thankyou for sharing❤
The lightstream to the GPU goes the wrong way..power goes IN. BUT IT look great👍
The budget is approximately $3,800 to $4,000 dollars🤑🤍
Yes dad it's just for typing practice ⚡
is there a reason for having 6 fans on the radiator instead of 3? btw looks AMAZING!
Push Pull Configuration
Какая красота 🔥❤
Nice pretty good.
Clean!
I would go for white pc build if white gpus werent so expensive
Heeey, it's so cuuuute ! i have the same config ! but I have a little problem, i don't know how to unsync the Strimer rgb like you. Every line of my strimer are sync. Can you tell me how to do this ? Thank you :)
Looks amazing, but I duno why people need 13 fans and 4 sticks of ram. 6-7 is plenty and 2x16gb ram is more than enough. Also why are 10 exhaust and 3 intake? Unless they are reversed.. but why not reverse the bottom as well.. A bit overkill
i noticed u have six fans in the aio what screws did u use to screw the top ones in? i'm trying to do the same but i don't want to get too short of screws lol
the airflow isn't great but good job on the build
Jeeeesusss that shit loook GREAT
Clean
If I had it, I would have turned it on just for the peace of mind
Not a very high end build but looks like it costs a kidney. Super clean
It’s time for me to build that to
Looks amazing but why do you have fans both on top and below the heat sync on the radiator..?
push and pull config if im not mistaken.
Surprised you have the 3 fans on the side as exhaust and not intake....
Finally someone said something
How did you sync the fans?
🤩
Hello m8. You did an amazing pc build. I have something similar with you. Is it possible to share the strimers rgb settings with L connect ? You are using the meteor preset ? Everytime L connect software runs the rgbs reset to the default. So i have to customize everything from the beginning. Is it the same for you?
I have a gigabyte aero geforce rtx 4070super. what strimer cable do i need?
got my sub :]
omg give me the build now
how do you make the strimer cables like that?
OMG
Is a 4060 ti good? I know it’s not the best but it’s a cheaper option and I don’t have much money
Btw it’s a prebuilt pc because I don’t know how to build a pc, I didn’t choose a random one, I searched for one with decent specs
Fire
What kind of cooling system do you have?
Hi, im planning to get the same motherboard and Intel processor too. However, I'm a new builder and I'm figuring how you guys know what components to buy that are compatible?
ты питание для видеокарты не до конца подключил
imho the og evo looks better than the evo rgb they just released
What mode are you using for the Strimer cables I’ve been looking for it everywhere 😭
Drizzle, in L-Connect3 under the Strimer section, drop down menu for the multiple lines section