Congrats on your first build, I have a suggestion though. I don't know why you flipped the bottom fans at the end but they are set as exhaust, you want the bottom fans ALWAYS set as intake and the top fans as exhaust or you'll intake a lot of dust from the top and going against covection, flip the top and bottom fans and you're good to go. If you did this for aesthetic reason lian li makes reverse flow fans, you can buy them.
@@playsolo713 The GPU pulls in air from the bottom as well, having the bottom as intake will keep the fans from fighting each other and creating extra noise.
0:57 bit late but honestly, you made the perfect mistake of choosing the 12th gen over anything newer considering their instability. Had a 14th gen myself and was I glad to get rid of it after a few months of use.
Congrats on your 1st build. PC looks very nice & solid. 😁 good choices on the components for your 1st. Hopefully you will continue to expand on the build 👏👍
Oof the comment section can be mean sometimes lol You should definitely do the fan swap other comments have recommended! In from the bottom. And yes you could have spent that budget a little differently to get more gaming performance BUT what you built is a GREAT pc and you did an amazing job on the ascetics. I am hype for you!
Nice vids thanks for sharing 😊 Just be sure that you put your fans in the right way ! Usually the air get in by the bottom and from the side and get out by the 3 fans on the top and from the fan next to your CPU Have fun gaming ✌️
Omgsh I loooove your build!! I’m about to build my first pc soon too and my uncle who is a tech guy got mad at me because I told him I didn’t care if white builds cost more lol 😂 It just looks so clean!!
your aio should be at the top, it causes damage to your pump because its on the same high a your cpu. Pump will fill with air bubbles. Your Aio should always be above the cpu hight.
Congrats!! Of course a have my critics tbh: 1) that motherboard is overkill, ROG is just overpriced stuff from ASUS that only looks cool. I would preffer TUF (also from ASUS) or Asrock 2) 850W is also overkill, that GPU doesn't need too much power so i would have chosen a 750W or even a 650W could work excellent! 3) the GPU, a 3060ti would have been a better choice or even spend a little bit more for a 3070 or a 4060ti. Or choose the Radeon 7700XT from AMD But that is my opinion, your setup is amazing and that is the most important thing 😊
Not the best radiator placement tho (cuz air bubble will be accumulate on the top part of radiator over time. But you got pipes there). You gotta atleast rotate it 180 degree. Placing it on the top would be the best. And i would argue that 3 intake fans vs 6 exhaust fans are not balanced.
I’m pretty sure it will still be a great PC. I regretted first not going for DDR 5 and 13th generation, but my pc runs great and I have zero regret for going with my budget! Also, you can always upgrade later 💕
Tubes from AIO should be at bottom, useless to use strimer for MB(you barely see any of it), just do it for graphic card only in this case. Nice build tho ;)
Hello! I cam across your video as I'm also using the same motherboard! Can I ask why you would need a USB hub? I'm a bit confused about that part and now I'm wondering if I need something similar as well XD. Ty and beautiful build!
Thank you! I needed a USB hub for the fans. Asus Mb only has one USB port, and we need an extra USB port for the fans. However, if you are going to use the Lian Li fans like I did, I recommend getting a hub from Lian Li (pw u2hb) rather than the one from NZXT. Fans won’t be recognized unless you connect them using the Lian Li hub and won't be able to control the fan speed and lights. Got myself a new Lian Li hub for that issue. I heard that the issue only comes with the Asus Mb. ☺️
How small is your space? Lian Li mini is smaller than a full size case but still occupies some space. I added an extra drawer to the side of my desk to place the PC on.
My desk is 36 by 24 deep. Monitor is mounted tho. I love your build though it’s stunning. Also is it possible to see your whole setup? Also how did u get the bunny on your liquid cooler. Ughh I’m so impressed by this setup
With an extra drawer on the side, I think it's doable. Otherwise, the PC will take up too much space. I will try to show my setup in the future; still working on it. 😊 I got the bunny theme from the NZXT app, found under Sanrio. Thank you so much for liking my video ♥️
Bro had a 1900$ budget, could’ve gotten a 4080 super (1000$) and gotten a good cpu like the 7 7800 ($350) u just got SCAMMED🗿 btw the 4060 is entry level and 4080 is high end you gotta be kiddin me💀 anyways good video!
Good build, the 4060 makes it bad tho lol that card is horrible for gaming and is only good for power efficiency...If I were u I would downgrade to a 3060 or just upgrade to a 4070 overall nice white build it looks clean.
@@ashandcaI4060 is the gpu or graphics card, the comment is correct, the 4060 isn’t great for the price. DDR5 is ram, ram is temporary memory, the difference between ddr4 and 5 are the clock speeds, ddr5 is newer and faster and also is supported by the motherboard in the video however they decided to go with ddr4 for whatever reason
With all due respect, but this build is some solid garbo, not only are you stuck on a dead platform, you also Picked a bad motherboard Picked a horribly overpriced GPU Overpriced SSD Bad cooler 0/10 try harder
this is clearly their first build... maybe instead of shitting on the entire thing and offering ZERO feedback other than things are shit, offer better alternatives next time. be kind, doesn't take much. :)
i’m so tired rn i don’t even wanna talk.. but for fucks sake. you put 9 fans as exhaust and 0 as intake… you’re not even taking air into the pc, you’re just pushing air out which doesn’t even exist… i was gonna say “finally a girl that knows how to build pc’s…” or did i? also, a 4060? the worst graphics card for the price EVER? you could’ve paid 200$ more and gotten a 4070 which you EASILY could get outta those 2 fans u bought for the AIO while you could’ve just used the NZXT ones AND the lian li strimers… also, you put the aio in a wrong direction, you’re basically pushing the water into the fans, not into the aio aka into the cpu, so good luck with the overheating of ur 12th gen i7, whereas you could’ve paid 40$ more and gotten the 13th gen, it runs faster, it has future upgrade options, and it’s better than the 12th gen i9. about 13% better than the i9-12th, about 35% PERCENT better than the i7-12th. if you put the AIO on the top, you could’ve placed the pump on the bottom, but you put it on the right, which means the pump must ALSO be on the right… don’t even get me on the strimmers.. you bought the 24 pin which is more into the back rather than buying one for the gpu which you can atleast see…
by that i mean you don’t have to take the pump off, leave it just like it is and mount the 240mm fans on the top, you can then take the top fams and put them on the right and one on the left because the 240mm has to be on the right so you still have room for another fan on the left (on the top)@@playsolo713
Congrats on your first build, I have a suggestion though. I don't know why you flipped the bottom fans at the end but they are set as exhaust, you want the bottom fans ALWAYS set as intake and the top fans as exhaust or you'll intake a lot of dust from the top and going against covection, flip the top and bottom fans and you're good to go. If you did this for aesthetic reason lian li makes reverse flow fans, you can buy them.
ohhhh~~ Thank you for letting me know. I will definitely change their setting 😊
@@playsolo713 The GPU pulls in air from the bottom as well, having the bottom as intake will keep the fans from fighting each other and creating extra noise.
love that it's a full white pc is just such an aesthetic! i would just advise you to switch the top and bottom fans orientation
Ahhh~~~ thank you. I changed the fan orientation 😉
Cozy video~ :) And the final build looks really nice! You've built yourself a really solid PC so I hope you have a lot of fun gamin on it!
Thank you! Your comment made my day 🥰
0:57 bit late but honestly, you made the perfect mistake of choosing the 12th gen over anything newer considering their instability. Had a 14th gen myself and was I glad to get rid of it after a few months of use.
Congrats on your 1st build. PC looks very nice & solid. 😁 good choices on the components for your 1st. Hopefully you will continue to expand on the build 👏👍
Thank you! I hope so too 🥰
Thats a very decent build, would work flawlessly
Oof the comment section can be mean sometimes lol
You should definitely do the fan swap other comments have recommended! In from the bottom.
And yes you could have spent that budget a little differently to get more gaming performance BUT what you built is a GREAT pc and you did an amazing job on the ascetics.
I am hype for you!
I swapped the fan position. I know I overspent on the fans and really hoped to upgrade the gpu later 🥲 Thank you so much for your kindness 💕
Hey @itzturtlexd1721 I have a budget of 15-1800 I want to build a mini 011 build as well what parts do you recommend?
Nice vids thanks for sharing 😊
Just be sure that you put your fans in the right way ! Usually the air get in by the bottom and from the side and get out by the 3 fans on the top and from the fan next to your CPU
Have fun gaming ✌️
Thanks for the tip! I changed the fan configuration ☺️
Omgsh I loooove your build!! I’m about to build my first pc soon too and my uncle who is a tech guy got mad at me because I told him I didn’t care if white builds cost more lol 😂 It just looks so clean!!
Thank you! Guys will never understand but aesthetics are more important to us 🤣 Have fun with your first pc build 💕💕
Aww it looks so cute, hope you enjoy your new pc!
Thank you! I really like it.
I love how similar the music is to Rudolph the red nosed reindeer.
3:24 is classic Intel issues.
Almost all modern AMD systems come with the cooler backplate installed!
your aio should be at the top, it causes damage to your pump because its on the same high a your cpu. Pump will fill with air bubbles. Your Aio should always be above the cpu hight.
I'm complete newbie, what is aio, what does it mean🙏😭
@@Tantanny21 the cooler (all in one)
@@fakecaptain6251 thanx
Congrats!! Of course a have my critics tbh:
1) that motherboard is overkill, ROG is just overpriced stuff from ASUS that only looks cool. I would preffer TUF (also from ASUS) or Asrock
2) 850W is also overkill, that GPU doesn't need too much power so i would have chosen a 750W or even a 650W could work excellent!
3) the GPU, a 3060ti would have been a better choice or even spend a little bit more for a 3070 or a 4060ti. Or choose the Radeon 7700XT from AMD
But that is my opinion, your setup is amazing and that is the most important thing 😊
Just perfect!! 🤡🫶🏻
😻😻😻
Not the best radiator placement tho (cuz air bubble will be accumulate on the top part of radiator over time. But you got pipes there).
You gotta atleast rotate it 180 degree.
Placing it on the top would be the best.
And i would argue that 3 intake fans vs 6 exhaust fans are not balanced.
Thank you. I'm fairly new so these advices are more than welcome. Will rotate the pipes and balance the fans ❤
2:42 I used pc part picker when I was building my pc too 😂😂 idk pc part picker came in tooo clutch
At least it lets me know what my final price will be 😂
Beautifully done.
Thank you!
where do you put extra storage components like hard drives?
nice.. never seen a cute video for building PC like this.. 😄
Thank you 💕
damn, I laughed at the 4060 part but good video bro, asmr and satisfying . u should make more pc building vids
Thanks! Hope to upgrade gpu later 🥰
@@peterfdfdy1539 bro u cant get a 3060 for 250 buddy 💀💀💀
lol you’re embarrassing yourself with this comment you cannot buy a pc for 250 they cost around 1,300
I got a pc with an rtx 3070ti and i7 13700kf for 1236$
Also u guys are wrong, is the rtx 4060 not 3060 but for 250$ the gpu called “Arc 750” from intel is 52% more performance then the rtx 3060
My first build was a 4060ti nothing wrong with that as long as u happy !!
I'm happy! Thank you so much 🥰
2 bands but a 4060 is wild
😊
im pretty sure im building this same pc part for part but im only buying 2 sets of uni fan 3 packs. will i need the usb hub? also great build :)
I’m plan to build a pc next year and using same component like u but instead of i7 down to i5 cuz my budget😭
I’m pretty sure it will still be a great PC. I regretted first not going for DDR 5 and 13th generation, but my pc runs great and I have zero regret for going with my budget! Also, you can always upgrade later 💕
@@playsolo713 Tysm for all the advice😀
Tubes from AIO should be at bottom, useless to use strimer for MB(you barely see any of it), just do it for graphic card only in this case. Nice build tho ;)
Ahhhh~~~ Thank you 😊
@@playsolo713 love the case, have the same but black sooo 😉
do u know any cable rgb for this gpu?
great build almost got the same one exept isnt it a ddr5 mobo ur using ddr4.
i understand the aesthetics but maybe you should get a i5 13600kf and a rtx 4070 instead of those fans
It looks so cuteee. I have a question: any power supply fits in this case or it has to be one micro version?
Thanks! You need ATX version to fit in the case 😊
@@playsolo713no you don’t need an atx it doesn’t fit .
how come you used the usb hub ? what other things do you have in the build that use a usb ?
Motherboard only had one usb port and I needed additional ports for my fans 😉
Hello! I cam across your video as I'm also using the same motherboard! Can I ask why you would need a USB hub? I'm a bit confused about that part and now I'm wondering if I need something similar as well XD. Ty and beautiful build!
Thank you! I needed a USB hub for the fans. Asus Mb only has one USB port, and we need an extra USB port for the fans. However, if you are going to use the Lian Li fans like I did, I recommend getting a hub from Lian Li (pw u2hb) rather than the one from NZXT. Fans won’t be recognized unless you connect them using the Lian Li hub and won't be able to control the fan speed and lights. Got myself a new Lian Li hub for that issue. I heard that the issue only comes with the Asus Mb. ☺️
Ty for the reply! @@playsolo713
Can I ask does that case feel very big or think it could work in a small space. Looks beautiful
How small is your space? Lian Li mini is smaller than a full size case but still occupies some space. I added an extra drawer to the side of my desk to place the PC on.
My desk is 36 by 24 deep. Monitor is mounted tho. I love your build though it’s stunning. Also is it possible to see your whole setup? Also how did u get the bunny on your liquid cooler. Ughh I’m so impressed by this setup
With an extra drawer on the side, I think it's doable. Otherwise, the PC will take up too much space. I will try to show my setup in the future; still working on it. 😊 I got the bunny theme from the NZXT app, found under Sanrio. Thank you so much for liking my video ♥️
Can u confirm me,
Would the GIGABYTE X670E AORUS PRO X motherboard fit into that case ?
I want to buy it
I've read it fits it
Just wanna make sure
yes
Where did you get that little figure that is in your PC? It's very cool.
From Amazon. You can also get it from popmart. Search for Skullpanda😉
@@playsolo713 You're awesome! tyvm
Será q essa 4060 roda cyberpunk?? O meu pc é igualzinho esse mas tô na dúvida se junto mais dinheiro pra 4060ti
I have never played the cyberpunk so I dont know. If you are a heavy gamer, I believe its worth getting the ti 😊
Do they sell the lian li strimers for 40 series gpu when I look it up it says they do but I haven’t seen anyone use them
They do! Didn’t wanna spend more money though 🥲
@@playsolo713ok thank you just wanted to make sure build looks amazing!
do u know which cable rgb lian li strimer can i use in my RTX 4060 AERO 8 pin? link
how is 6 fans not more than enough for that setup 😂😂 you sure you mounted your cpu cooler properly?
Amazing
Thank you!
My fans are not spinning so slow,how did you set this up ?
I didn't do anything but fan speed can be adjusted thru the program 😉
No strimer cables on the gpu? 😭
😭
@@playsolo713 do u know any cable rgb for this gpu?
Is the Case really light blueish?
It's clear. I think it looks blueish cuz of fan lights ☺️
I didn’t get the same price somehow
Bro had a 1900$ budget, could’ve gotten a 4080 super (1000$) and gotten a good cpu like the 7 7800 ($350) u just got SCAMMED🗿 btw the 4060 is entry level and 4080 is high end you gotta be kiddin me💀 anyways good video!
Yeah 1900$ budget is crazy for ddr4 and 4060 💀
@@NeziaArtworks Fr I was lost for words like the hell they got a 1080 pc when that budget can get a 4K resolution pc
Is this not the nzxt player one
It only has one nzxt product
@ the build look it up
Good build, the 4060 makes it bad tho lol that card is horrible for gaming and is only good for power efficiency...If I were u I would downgrade to a 3060 or just upgrade to a 4070 overall nice white build it looks clean.
I'm hoping to upgrade it later this year. Thank you!
If you don’t mind how much did it cost
$1,897 including taxes 😉
Thank you for telling me
@@playsolo713 almost $2000 for a build with a 4060 in it?? 😭
@@playsolo713 is that in USD?
You shouldn’t get the 4060 because it has 8 vram which is bad and it’s kinda expensive
nice build tho 😊
I would make a different choice now. Hope to upgrade later. Thanks for watching ♥️
This day will come to me soon😢
Im sure and you will have so much fun ♥️
Muito bonito!
Thank you 🥰
thermal paste?!?
NZXT cooler has a preapplied thermal paste.
@@playsolo713 ahh ok, had me concerned for a second 😅
i see a comment like this on every first pc build video even when theres thermal paste preapplied
리안리 예쁘고 다좋은데 .....가격이랑....팬이 생각보다 오래 못가서 ....고장남....ㅠㅠ
헉! 고장이 젤 무서워요
its good, but a 4060 on that budget is sad. you couldve gotten a 4070 at last
Hopefully I can upgrade later ☺️
jesus theres a latch for ur m.2 slots yet u straight cover with the lid...
With a 1800 $ budget you only got a 4060 and not even ddr5 ram?? That motherboard is not appropriate for this build!!!
Mate it’s ✨aesthetic✨
What’s a 4060 and a ddr5 help meee 😭
@@ashandcaI😭😭
@@ashandcaI4060 is the gpu or graphics card, the comment is correct, the 4060 isn’t great for the price. DDR5 is ram, ram is temporary memory, the difference between ddr4 and 5 are the clock speeds, ddr5 is newer and faster and also is supported by the motherboard in the video however they decided to go with ddr4 for whatever reason
The fact that she ist using an 850Watt psu 💀
With all due respect, but this build is some solid garbo, not only are you stuck on a dead platform, you also
Picked a bad motherboard
Picked a horribly overpriced GPU
Overpriced SSD
Bad cooler
0/10 try harder
this is clearly their first build... maybe instead of shitting on the entire thing and offering ZERO feedback other than things are shit, offer better alternatives next time. be kind, doesn't take much. :)
@@notpeechi sounds like glazing to me
@@yieldergd sounds like you don't understand what being a decent human being is to me 🥴
Worst price for performance i have ever seen
Sorry you didn’t like it 🥲
The main thing is that she is happy with her pc, you can always found fault with something
i’m so tired rn i don’t even wanna talk.. but for fucks sake. you put 9 fans as exhaust and 0 as intake… you’re not even taking air into the pc, you’re just pushing air out which doesn’t even exist…
i was gonna say “finally a girl that knows how to build pc’s…” or did i?
also, a 4060? the worst graphics card for the price EVER? you could’ve paid 200$ more and gotten a 4070 which you EASILY could get outta those 2 fans u bought for the AIO while you could’ve just used the NZXT ones AND the lian li strimers… also, you put the aio in a wrong direction, you’re basically pushing the water into the fans, not into the aio aka into the cpu, so good luck with the overheating of ur 12th gen i7, whereas you could’ve paid 40$ more and gotten the 13th gen, it runs faster, it has future upgrade options, and it’s better than the 12th gen i9. about 13% better than the i9-12th, about 35% PERCENT better than the i7-12th. if you put the AIO on the top, you could’ve placed the pump on the bottom, but you put it on the right, which means the pump must ALSO be on the right…
don’t even get me on the strimmers.. you bought the 24 pin which is more into the back rather than buying one for the gpu which you can atleast see…
Top 3 fans were exhaust (now changed the bottom fans exhaust and top 3 fans intakes) so for the AIO, should I rotate it facing the right fans?
i’d honestly think the best way is to mount it on the top and the pump facing the bottom@@playsolo713
by that i mean you don’t have to take the pump off, leave it just like it is and mount the 240mm fans on the top, you can then take the top fams and put them on the right and one on the left because the 240mm has to be on the right so you still have room for another fan on the left (on the top)@@playsolo713
@ali.._313 Maybe instead of ranting at people even when it is their first time a pc you should touch grass and get a life.
gyatt damnn calm down bro… who shit in ur cereal? its their first build. suggest and advise rather than criticize.
what kind of gpu are you thinking about upgrading too? i was also going to get the 4060 ti but i'm having doubts and have no idea what would be better
No idea at the moment. I think it depends on the games you’re playing. 😊