Wow! Thats some tinkering. That problem with the slow filling is the same that have happend to the restrictors in my markers and the reason I drilled them. After drilling no problem. Very interesting video as always. Keep up the good work 😃
The Mad Scientist is at it again! I'd like to see it succeed. Get more power and more shots. Maybe even end up with a modular design to quick swap co2 sizes 💥💥💥
At this point thats all it is. ZRam does their own cast valve so i cant take credit for it in its entirety. There can be many spin offs by making your own threads.
Nice attempt i can feel you in full.😢 I was sad looking loose co2 and fixing the connectors and the more failing but for me what you do it its 1000% bravo ❤ Don't afraid to fail and when you fail you came up stronger with better ideas 😊
Good tip. I have also detected the orientation of the spring can affect its return rate. My understanding using the factory or HD24 spring is the fat end is forward? It is a conical spring. My substitute springs are not conical and may be interfering with the return.
Hi I think the residual pressure is stronger in the chamber than the return spring, maybe if you replace it with another stronger one it could work. In the meantime I like the idea in 16 g. courage strength and honor.
In this particular case it did not have enough co2 to fully send the bolt so it gets stuck in limbo. Bolt spring is not strong enough to over come the depleted pressure in the chamber because it didnt fully compress the spring.
I've been trying to stay away from watching LLSD stuff coz i invested over a grand in pre-ordering an Interceptor (yet to be shipped), but you calling the outer casing a 'clam shell' still never fails to make me howl 🤣 I know it's childish, but it really is a UK colloquialism for ... err ... womens lower parts.
Wow! Thats some tinkering. That problem with the slow filling is the same that have happend to the restrictors in my markers and the reason I drilled them. After drilling no problem. Very interesting video as always. Keep up the good work 😃
Yes sir Rune thank you. This particular one was sloooooooow.
So much of this stuff is above my pay grade, but I still love watching and trying to learn things 😁
I feel you bro
The Mad Scientist is at it again! I'd like to see it succeed. Get more power and more shots. Maybe even end up with a modular design to quick swap co2 sizes 💥💥💥
Yes i have some work to do. I want to try this in my HDP.
Awesome experiment... you prove anything is possible !
This is a great concept. You Sean are a mad scientist! 👍
At this point thats all it is. ZRam does their own cast valve so i cant take credit for it in its entirety. There can be many spin offs by making your own threads.
Nice attempt i can feel you in full.😢
I was sad looking loose co2 and fixing the connectors and the more failing but for me what you do it its 1000% bravo ❤
Don't afraid to fail and when you fail you came up stronger with better ideas 😊
I’ll get it working better.
@@lesslethalfordummies nice my friend
Braided steel line sounds dope then u can remote line to hpa hellz yeah💪🏼💥💥
On the video where the barrel was getting stuck, my 68 used to do that what I had to do was turn the barrel and loosen the screws around the clamshell
Good tip. I have also detected the orientation of the spring can affect its return rate.
My understanding using the factory or HD24 spring is the fat end is forward? It is a conical spring.
My substitute springs are not conical and may be interfering with the return.
Conical huh 🤔@@lesslethalfordummies
Awesome video
Thanks man!
at least this could be interesting with longer barrels, it should add a little volume and in combination with the chamber extension maybe
It is literally blasting almost half of the 16g in the first shot and not farting which is by far the strangest thing.
16 is the new 12. I think the barrel spring is getting bunched up from all that new power.
A shorter but stronger spring but stretched to size, so there’s less wire to bunch up… If that is what’s happening?
Hi I think the residual pressure is stronger in the chamber than the return spring, maybe if you replace it with another stronger one it could work.
In the meantime I like the idea in 16 g. courage strength and honor.
Bolt spring is going to be my second option.
First i am going to neck down the pipe to some 1/8 braided hose to see if i can regulate gas use.
Interessting build. How about 88g?
Good question. I need to tune this setup better before i go further.
88g gives more power..I use that set up on one of mine, whit 13inch steel barrel.
Not sure there is enough space in the grip to accommodate the larger 88 and with something that large its nice to have an on/off.
@@lesslethalfordummies mine stick out and I have a on/off.
That you built can you buy from z-ram.
Now I have a project to do with my hd50 whose valve blow out on me. 😮 maybe you can help me bring it back to life 😊
Perfect project for busted valves.
Why did the bolt got stuck forward at 14:55 ??? I wanna know why beacuse mine does the same sometimes can you tell me why?
In this particular case it did not have enough co2 to fully send the bolt so it gets stuck in limbo. Bolt spring is not strong enough to over come the depleted pressure in the chamber because it didnt fully compress the spring.
I've been trying to stay away from watching LLSD stuff coz i invested over a grand in pre-ordering an Interceptor (yet to be shipped), but you calling the outer casing a 'clam shell' still never fails to make me howl 🤣 I know it's childish, but it really is a UK colloquialism for ... err ... womens lower parts.
"Look at the size of that hole" 🤣 Is that how you sweet talk the Mrs's?
@@Miss_Mina_Murraywell if I said that to my wife, I'd be sleeping on the couch for a few days lol 🤣
@@Joreel 🤣
No comment 😁
🥼 scientist at work if any one can pull it off it gonna be you my friend
No lab coat this time 😊
@@lesslethalfordummies it’s coming lol and when it dose it’s gonna be epic