What material is those stakes made from? Since they dont last long i was wondering if that's an issue with the material or if it would be possible to make the dimples as inserts so you can either get more life out of them or at the very least make it easier and cheaper to swap out inserts for the dimples instead of replacing or remachineing? Great videos BTW.
Just started watching your videos. Very informative and interesting. Do you have plans on doing a physical on any BCM BCG's or uppers? Just curious. Thanks!
Brian Cabalic thanks! I also got the screws through M-Guns, we’ll see how long it takes. It’s a much better deal to get the screws from the website than Forward Controls Designs.
I been watching a lots of your videos. I see one about the fail zero bcg. After watching it I feel I NEED to change mine out. I have had no problems with it but on mine I feel there is a small spot on the bc that is constantly dirty and I can never get it fully clean. I want to test it like you but don't have a jig to redo the staking with a new key. Do you have any suggestions on a cheap but good jig. I am pretty sure I am buying your staking screws those made it easy looking and beautiful finish.
I hope you read this, even though the video is a month old. You should NOT repeatedly click-torque any fasteners. It causes a slight uptick in the torque at the fastener. By clicking multiple times you end up a few lbs higher than spec. Those gas key screws are probably 60-62in/lbs now.
S.O.T.A.R. is the definitive resource for all things AR. Great channel,really appreciate all the info.👍👍
Nice job Chad. I appreciate all your informative videos. Thank you for the work you do.
I would love to purchase a set of the bolts please. I have that generation of MOACKS
What material is those stakes made from? Since they dont last long i was wondering if that's an issue with the material or if it would be possible to make the dimples as inserts so you can either get more life out of them or at the very least make it easier and cheaper to swap out inserts for the dimples instead of replacing or remachineing? Great videos BTW.
In a gas piston set up what is your recommended key inspection and maintenance?
Nice job. Those look perfect
There's no way in hell those bolts can ever back out. I think that is the best staking job I have ever seen. Excellent video , thanks.
Your channel is the most informative channel on youtube. Full Stop.
Do you ever plan to do a build video series?
I'm working on documenting those procedures. It's going to take a while.
Imagine having to stake your bolt, this comment was made by the AR-18-type bolt rifle gang
I need this tool in my life
So you torque between 55-58in/lbs but your BCG physicals only require a 30in/lb test to check if the key screws back out, correct?
30IN# does not look for properly installed screws. It looks for grossly undertorqued or broken screws.
Just started watching your videos. Very informative and interesting. Do you have plans on doing a physical on any BCM BCG's or uppers? Just curious. Thanks!
Yes. I'll do one soon.
Where do I get the jig/tool?
Where can I buy these
Where can I buy these bolts
where do you buy the kit? I just bought the MOAKS, just need the bolts.
Brian Cabalic thanks! I also got the screws through M-Guns, we’ll see how long it takes. It’s a much better deal to get the screws from the website than Forward Controls Designs.
I been watching a lots of your videos. I see one about the fail zero bcg. After watching it I feel I NEED to change mine out. I have had no problems with it but on mine I feel there is a small spot on the bc that is constantly dirty and I can never get it fully clean. I want to test it like you but don't have a jig to redo the staking with a new key. Do you have any suggestions on a cheap but good jig. I am pretty sure I am buying your staking screws those made it easy looking and beautiful finish.
The non MOACKS jigs on the market have not given me clean results.
what is your opinion on field staking 3-4 spots from above with an auto punch?
Perty like Sionics staking.
As my friend Truman says B E A utiful
Are they a no-go with the pocket moacks?
I don't own that version so I can't say.
I am not worried about these petty BCG Issues of staking the gas key, as I have the LWRCI ic di one piece integrated gas key BCG..muah hahaha
😂👍
@Red pilled patriot So, when your gas key opening goes out of spec, you have to replace the entire bolt carrier? That's pretty lame if you ask me :P
Couldn't find it for sale on your website?
I'm out, but I'll be making more in about 4 weeks.
Does this work with dpms ar10 or what would you recommend
You need a AR10SR25 Type MOACKS to stake those Gas Keys
has something happened to m-guns? The site wont work and I cant seem to find them as of 10/20
I hope not.
I hope you read this, even though the video is a month old.
You should NOT repeatedly click-torque any fasteners. It causes a slight uptick in the torque at the fastener. By clicking multiple times you end up a few lbs higher than spec. Those gas key screws are probably 60-62in/lbs now.
That torque wrench specifies 3 clicks in the manual.
That dislike ratio.... Why though?
It happens with all my work.
When it comes to your torque wrenches, do they ever need to be calibrated?
I get them checked once a year.
@@SchooloftheAmericanRifle Also, is the Digital Fat Wrench worth the extra $20?
@@donulldh4785 they are not bad but I still prefer the analog ones I have. It's simple.