'91 Prelude H22a Build Log 1: Intro, rear wheel bearing, and moldy sunroof
ฝัง
- เผยแพร่เมื่อ 8 ก.พ. 2025
- Check out Prelude3G.com on Instagram: / prelude3g
Get custom 3g Prelude parts here: prelude-engine...
----
This build may have ended to make room for other Prelude projects but check out these related videos:
I swap this H22 into my Accord: • 1992 CB7 Accord H22 Sw...
Here is a new Prelude H22 swap I did: • 1988 BA Prelude 4WS Eu...
I K-swapped the Prelude this was replaced with here: • 1991 BA Honda Prelude ...
Build thread: www.prelude3g.c...
Music:
Deus-Ex: UNATCO
Red Alert 1: Fogger
![El coche de las cuatro ruedas directrices mecánicas: Honda Prelude 4WS [#USPI - #POWERART] S13-E22](/img/n.gif)
This is so sweet. I was 26 in 1994 when I sold my 86 Prelude SI - so I could get married. I am now 54 and we have 5 grown kids. Glad I made the choice but still miss the car. Mine was black on black and perfect shape, new clutch and Michelin tires. I enjoy your video. Maybe sometime I will get another and start a project. Thanks for your great video. Best wises.
TH-cam definitely needs more love for the 3G!
This Lude is so clean. Ilike those Canadian door panels that delete the seat belts on the top pillar.
Good work Dave. I prefer these step by step tutorials. Looks like you have several projects in the works from what I gather
Your attention to detail is indescribable, dude. I don't know... maybe I've been flat rate for a little too long...
This is a great step by step video on how to do the rear wheel bearings!!
The only thing I would say is you really gotta torque those wheel bearing axle nuts to factory spec as they set the preload in the wheel bearings!!
Too little preload and they'll die real quick, too much and they'll wear out faster than normal. Using an impact wrench will overtorque generally. Just a comment from a guy who used to design these parts in my last job!
Great work on keeping the prelude community going with great content.
As far as I know on this type of bearing the preload is set by the manufacturer. The inner races are already pressed against each other so tightening the nut doesn't change the preload.
Thanks for helping keep the Lude alive! Looking forward to more videos of this amazing car man!
This is pretty sweet
Deus ex music in the background...love it. And the car is nice too :)
daaam this thing is fantastic! more content pleeease!
Badass lude !
Put the new bearing in the freezer overnight and it will drop right in. They shrink every so slightly.
UNATCO
Got a sub outta me real quick with these lovely hondas and great content. Please keep it coming and I'll keep watching lol thanks
I love your car man. Ive owned 3 3rd gens and plan on getting another after im done with my current build. Ive always wanted to h22 swap one but didnt have the money or the knowledge when i had mine. Why didnt you used bearing grease instead of wd40? You can also put the bearings in the freeze for a couple hours and they will press in much easier.
Clean 3G 👍.
17:55 Nooooo. Keep going. Just 10mins more cleaning on both sides.
Wow ! I love it . What do I need to get it done ? I got 1990 4WS need to update my motor
Prelude3g.com has the swap instructions under the powertrain section.
Thank you 🙏
Man love the build so much I wanna build my own. I’m looking at one rn with a blown motor. I want to put a H22 in it but not have to cut anything. Heard u make mounts too do they still require cutting?
I don't make the mounts. Sean at 1funryd.com makes the H22 swap mounts. They don't require cutting anything.
Keren
I have prelude 1990 SI 4WS. How much do you charge For swap with H22A engine and want to keep the power steering and AC. Please let me know.
ハブベアリング交換は、素人がやる気を出せば出来るものではないので、ベアリングの交換時期や不具合を感じたら、ヤフオクとか楽天市場で中古のナックルごとワンセットで10000円前後で購入出来るので、ナックルごと交換してしまったほうが、全然早く済みます。 HONDAは車種のグレードごとにドライブシャフトのスプライン形状が違う為、適合する部品を選択しないと、全く入らない。 圧入は簡単そうに見えて結構難しい。ハブボルトの交換を検討する場合、ハブリングに5本の純正ボルトがディーラーでセットされている完成品を取り寄せて交換したほうが間違いありません。 尚、HONDA純正ハブボルトは、スチール製の10.5ピッチ。 sus ステンレス製ハブボルトを純正使用している他社ディーラーもありますが、 サスステンレスのボルトピッチは11.4なので、スチール製ボルトにステンレス製ナットを間違えて使用すると 一発でボルトの山が舐めてかじってしまうので注意が必要。 ワイドスペーサー、ワイトレといったスペーサーを購入する際も、同じピッチの製品を買わないとボルトとナットが適合しないので装着不可なので御注意を。
Oh man..just like mine in high school but mine had the f20 ??? Fi motor
Looking for a back seat for my 91 prelude can u help?
Can you tell me the specs on your wheels? They look amazing!
Which radiator are you using? Proud 3rd gem 💎 Prelude owner
Just a stock radiator.
Man if i could only find a 3rd gen without a moon roof.
So if you do a disc brake conversion on a base model 89-90 Prelude you can use DA ones or use the Si Prelude ones ?
Did you need to fabricate the lip to for the prelude front bumper ?
No, this is an 86-87 Integra stock front lip.
What is the tool called that you used to hold the hub when you pulled the race?
Bearing splitter/separator.
Impact gun that shit BABY!! Guten tight!
Where did you get your swap mount, this is awesome
What battery tray are you using
It a custom tray. Battery is 51R like Civics/Integras came with.
Know what bearing and hub would fit for awd
Wilson Dunsford on FaceBook sells the AWD hub and bearing: facebook.com/profile.php?id=100009307126496
@@Prelude3g not paying 500 bucks for 30 dollar hubs and 20 dollar barings
Great build clean 🔥 what are using for wiring
If you mean the engine harness then it's a Rywire.
Do you have the bearing part number?
SKF GRW156
What are the wheel specs?
15x7" 35mm offset.
Is there major fabrication needed to do a h22 swap in a 91 prelude...?
No fabrication needed, here is some info on the swap: prelude3g.com/p3g/hswaps/swaps.htm
Do you know where we can still buy the 22mm rear sway bars nowadays? Doesn't seem to be available anymore... where did u buy yours from? Thanks!
I make them. I've been too busy with with work and other projects to make any parts this year. I may do another run of bars next year.
@@Prelude3g Let me know when you make them again so that I can order one from you please. Thanks!
@@Prelude3g Do u think you'll be running another batch of the rear sway bars for the 3rd gen Prelude early next year? I'm just trying to decide if I should wait for yours or go with a Whiteline sway bar that someone is selling. I'd much prefer yours if it's not going to be too long of a wait though :)
Is that cage pvc piping? Smh
Never seen roll bar padding? It's an Autopower roll bar with SFI 45.1 rated roll bar padding.
300😎😎😎
Why she smoking like bob marley