Stick Welding 6” Pipe | 6010 Root and Hot, 7018 Fill and Cap
ฝัง
- เผยแพร่เมื่อ 11 มิ.ย. 2023
- Travis and JC show us how to weld a 6" pipe with the stick welding process. 6010 root and hot pass then a 7018 fill and Cap. JC is running his own remote from an engine driven welding machine and 1/4" rods to fill and cap. He hits 300 to 330 amps on this one! check it out!
#WeldTube #WeldLife #Welding
WeldTube Store
www.weldlife.com/
WeldTube Social Media
Instagram: / weldtube
Facebook: / weldtube
TikTok: www.tiktok.com/@weldtube?lang=en - แนวปฏิบัติและการใช้ชีวิต
👇WeldTube Store👇
www.weldlife.com
Do a video on 7028 it like 7024 but low hydrogen
Please tell me which camera you use to record welding videos
Just ordered a medium cut, I'm so excited to get it!
Assim e fácil decendente
Was a Boilermaker welder, on construction sites. My work was doing "certified" welds on high pressure powerhouse boilers, refineries, blast furnaces. It involved new and repair work. Many "rod burners" can do their work, standing at a jig or table. A "welder" can do the same quality welds standing, sitting, laying down, on their stomach, on their back or (as I once had to) bending over and welding between my legs (inside a boiler steam drum. Had my weld pimp comment that he didn't know we had to learn to weld standing on your head. Told him, "You don't, but if you want to get the job done, you better learn how".
@@tittlemouse92 I truly loved my career as a union Boilermaker welder/mechanic. I admit I didn't put down the "textbook perfect" welds some people here post. I can honestly say, that in over two decades, working with the tools, I never had put in a weld that failed a test, nor did I fail to certify. There were times that, because of this, I was sent to jobs where the welder (I replaced) had taken a shortcut and got caught.
You can look into a welding program at a local community College, to learn the basics.
If there was advice I'd give someone it would be to be:
1. Patience, when you hurry you miss things and make mistakes.
2. Make sure the surface/s your welding are "clean from any contaminate/s". Even if you're at a welding course and get a test coupon, run a torch flane over the area your going to weld, to remove any oils. Use a grinder (disc or burr) to remove scale from the metals. If it's a tube, that means inside and out, about 1/2" along the area you'll weld.
Working on a boiler for a 650 megawatt powerhouse. The customer wanted a section of water wall tube cut out/replaced for testing purposes. The material was a chrome alloy steel. Chrome alloy welds don't like dirt, of any kind. I had a good rapport with the customer weld tech, and he knew my welding. I marked and cutout the piece to be tested, located and cut/prepped the replacement piece as described above. My shift was over and the next crew came in to continue the work. They were to prep the existing area/insert/tack the new piece in. The weld procedure called for a heli-arc root and stick fill/cover.
This weld was a bit tricky as I could only see/weld three-quarters of the tube. My partner, on the other side did the rest. As I heli-arced the weld and got to the spot directly 8n front of me, the weld puddle started to get bubbles in it. A clear sign that the area had never been cleaned and the weld wouldn't hold. The weld tech was called and authorized cutting the tube back out, 4 inches (either end) longer so we could see what happened. Once removed you could clearly see the area that bubbled had not been cleaned properly. The weld tech informed my boss that the other crew wasn't going to weld any more. The job was mine to complete.
No one cares your just another welder another number bud
Local 175 boilermaker, I’m loving it.
@@Kingbib Detroit Local 169
@@richardkawucha1232This was an excellent read. Taking Welding courses at CC. Is job searching easy after?
I just got your modified Fiber-metal helmet and your auto darkening lens , have to be the best we have ever tried in our shop , thank you and your stickers now are all over everything , all the way from the desert of Arabia
Wow he did a great job 👏
Great weld man!!!
Thanks for this one.. Really helped a lot especially for the beginner like me 🙏👍☺️
grab a 3/16" 7018 for the hot pass and skip a whole pass all together! About time we see some 1/4" on a video..made sense it was done in alberta. ha
Looking good brother be safe and keep burning them rods🤙🏼
nice work i love 7018 5/32 myself .nyc welder 30 years stay well.
Perfect job welding
Beautiful work
Came out very nice
Well done!
Very useful for tutorial pipe welding, good welding technic.
I bet he couldn't pass a x-ray for pipeline work.
back in '96 @ Hobart Institute of Welding Technology we didnt use a grinder. Chipping Hamer and a brush, we trained 6010 up hill and 7018 fill and cap.
Work Of Art 🎨
damn that’s one perfect weld !!
Good work!
Great job ❤👏
That was great Wilding
Great video sir thanks
Good weld ! well Done.
Very cool!
Nice work.
that was perfect👏👏👏
Nice job 👍
I do welding in BOCES and I'm currently working on Bend tests on 7018
Bad ass turn 'n' burn!!!
great welds keep up the video's please
Very nice
F***ing slick job! ❤
Good job❤❤❤❤❤
Absolutely beautiful
Hello, did you pass 2 with 7018? But it can be poured with 7018 only by turning the pipe
Quite damn beautiful but for educational and situational purposes would you guys make a pipe video for a stationary pipe? Cause almost no one will have the luxury of a rotational jig unless you guys already have this content I just found the channel! Love it!
They are celebrating diversity
@@mainesteam4636 the old old wooden ship?
Is that a bit of undercut on the capping run ?
Extraordinary
Very nice 👍
Indonesia the best welder, no 1
I work at BFL in Nisku! Hello brothers!
amazing❤
Question why would you folks use stick instead MIG?
I was wondering this for b wille
Nice
Wow. ..what type of electrodes do you use. ?
Please tell me which camera you use to record welding videos
Incrível. Muito bom
That was badass!!!!
Nice❤
looks like a machine welded it ... super consistent !
it did
Saludos desde CR
Was machen sie auf Baustellen , wenn das Rohr fest verbaut ist ?
Knocking the flux off while welding nice bruh!!
Something I've been curious about for a while is what is the deal with pro welders and the use of past tense? I hear grinded, thirty twos not thirty seconds ect.
Mối hàn đẹp quá,tay nghề xuất sắc..❤
Damn I wanna do welding now
I have this test Tuesday for a job interview and test. I havent welded stick since welding school. I remember always being told, run 6010 downhill for your root and 7018 UPHILL for fill and cap. Soooo? What gives? Whats the right way
Can we see some Stick Stainless Vertical on a flat flush piece? Not angle, i can’t find anything anywhere
Que buen trabajo
How hot is the "hot pass" dont thinknit was mentioned
amo a arte de soldar metais.
Good👍👍👍
Do one in position with actuslly test rods 1/8 6010 and a 3/32 or 1/8 7018
Bom soldador. Tenta fazer um sem ficar rodando o tubo obrigado
Don’t get to weld on a rotator very often in the field!
Metal para Argentina. Esmoso ese arco
Easy in the flat position, 6GR is the test.
Mint weld
Cant rotate a pipe out in the field
When I'm hot passing with 6010, I don't even bother grinding clean. Just knock down the high spots (tie-ins), buff the slag, and giver.
raw❤️❤️❤️
Pode soldar com eletrodo decendo, eu sempre fiz de baixo para cima.
Теперь также только без прокрутки трубы😂
Très profésionnél ❤
International merchant junior banna chahta hun❤❤❤
Where is the 6g video ?
why he doesn't start to uphill on root
Porque es descendente y no ascendente con 7018 ? no entiendo
He’s doing downhill tho, I was taught to only hit uphill. Does it matter?
Do you know Clint Wilson
What engine drive was he using and what brand of 7018 ?
I was using my Vantage 400 and the rod was ESAB
Ohhhh 👍👍👍👍
How can i order a welding mask from your store sir I'm from the Philippines and how much?
1/4 "7018 is a bit overkill for fill and cap. 5/32 would be better. I understand the reason. Fab shop you have weld it as fast as possible.
Going into my 2nd year welding apprenticeship, I thought 6010 was pretty much on its way out?
What is the reasoning for using it on the root then a 7018 to fill?
Thanks! I'm not too far from you boys, down in Airdrie, AB!
6010 has all kinds of benefits as a root/hot pass rod. However some pipework requires properties that 7018 excels at providing. Lots of reasons for both depending on setting and application I'm afraid! I don't want to get ahead of your college or confuse anything you're being taught so just keep at it the knowledge will come 👍
@@samwhite1823 No this is all good info, appreciate it. I'd really have to be in the field to get a better grasp on it.
I'm currently in a shop fabricating/welding which is a whole nother ball game!
@@anxietyonline1947 nothing beats time with the machine, once you get to spend some time with 6010 you'll see how good they are at getting a root in fast, especially downhill. Keep at it bud 💪
@@samwhite1823 Yes sir I agree! Appreciate the info!
What welding machine was he using and what brand of 7018 ?
Ok so this leaves me confused. Down hand 6010. Is that aloud? I’ve been told both but my b pressure certification says up hill only
Or wait this is being rolled… so I’ve bin rolling but if it’s in position do you have to have a specific certification for a down hill root?
Different procedure, it's allowed but as with any pipe procedure if it's designed uphill you have to weld it uphill. Downhill 6010 is still the preferred method for cross country piplines
Which welder you recommend? For 6010
Miller welders are epic
Como vas a hacer el día que no puedas girar las piezas?😅😅😅
I’m paying $20,000 to go to welding school just to sit in class and watch them play your videos 🙈😂 fuck my life
God jobs
Can y’all do one of these but in position?
This position is retation
@dja I think they know that, just asking for a fixed pipe.
Yh, and show us uphill welding..
Good luck welding uphill with a 6mm 7018 😂 300 amps! Downhand in rotation only for that procedure I'm afraid
You ain’t know these guys can wear doing handstands buddy…
They ain’t got a show you lol
Ever use a 6011 root and 6013 fill/cap?
Down hill
Respekt
Do you guys have a video of the same thing just in 5G position ?
was he draggin the hot pass?
Did you know they use to drag hot passes back in the 1900’s?
When there's slag you drag, you never push rod.
I think they’re talking about it being a stringer bead for the hot pass. We were always taught to whip and pause a 6010 hot pass. Pretty interesting.
What is meant by this? Please explain 🥺🙏🙏🙏🙏
3/32" LAND
3/32" GAP
How ican get lboiler maker job in any country with 20 years experience
Slicker than come on a gold tooth
😎👍
👏👏👏👏👏👏👏👏👏👏🇧🇷
السلام عليكم ورحمة الله تعالى وبركاته أخوكم من الجزائر 🇩🇿 ماهو الفرق بين السلك 7018,و6013