Crawler Canyon Presents:
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Injora silicone are great-- but they are really made to fit Injora tires. So what about tires that are 8-12mm wider?
Get a Crawler Canyon tee! www.cafepress....
Affiliate Links
Injora silicone (green) amzn.to/3xeH9uV
Injora silicone (blue) amzn.to/45NyE6L
Fridge liner amzn.to/3VYU25R
IG: crawlercanyon
Amazon list: www.amazon.com...
🤩
This combo works great, im running it in my pro line bfg krawler kx and injora wheels. Great value for the performance it gives you.
We all hope that the tires are the only things that touch the ground! Fridge foam is a great idea - cheap, easy and effective.
i have injora 57mm and 64mm yellow inserts. the 57's inside lgrp swamp kings,and the 64's in injora swamp claws.both have great forward drive and side wall support. the yellow inserts smell real weird
I shimmed my inserts with aquarium filter foam. Very similar to fridge foam except its black.
I got them cut consistently round and easily using a make shift circle cutter. I basically a compass but using a knife point instead of a writing tool by using piece of cardboard, a hobby knife and a nail as a pivot point. You can also buy circle cutters too for not much amazon, Aliexpress, etc.
Da little void between da tire contact patch n da insert imo is da secret sauce fa a tire ta perform betterer 😊
1st like
Shim-salabim
Thank you Mr.C very much appreciated.....
Using this very method and products in my Tusks and my Fusks.
This is so weird! Literally hours before the release of the video, I made these exact shims for a set of injora greens inside fusks. Sir, you are a fine influence on my thinking. So much better.
good mod thanks Mr C
Is the fridge foam like a drawer liner type of product?
Yes
Do you think cutting a shim for the Injora using an actual RC tire foam, say from an RTR or that they give you when you buy basically any RC tire, would work, in theory? Or is it better to have something very soft, like the fridge sponge thing you used? Thanks!
This isn't pertaining to this video, but I would like to know if Vanquish internals will fit in the Meus portal axles please. Thanks.
Definitely not the front axles since meus use equal length axles while f10s have unequal lengths to accommodate the offset pumpkin.
I'm not too sure on the rear, but I'm interested to know if the portal gears are compatible.
All of the Vanquish inners will fit in the rear axle. In the front, you can only use the ring/pinion, portal gears, and stub axles. The F10 is offset and the MEUS nylon is not, so you can use the Vanquish universals.
Fridge foam shimming vs hobby lobby foam sheet shimming?
what does the hobby lobby foam sheet look like? Never seen it.
@@CrawlerCanyon 2mm and 5mm EVA foam. 12”x18” sheet. $.99
@@CrawlerCanyon very pliable and like 20 colors