QuickShot: My Powder Coat Settings For The Thunder BOLT. Cleaning Products I Use. 012 4K
ฝัง
- เผยแพร่เมื่อ 30 ก.ค. 2024
- Bowls, tumblers and other powder coated materials. These settings also work well for coated tumblers too. I' also share with you the products I use to clean up after the engrave to get a crisp, clean finish.These may not be the perfect settings but they work great for me and will at least give you a good place to start on your Thunder Laser BOLT. Try them out and let me know how they work for you. Cheers!
#engraving #bolt #laser
Laser NUG
Utilities /Equipment List:
Thunder Laser BOLT RF C02 Laser www.thunderlaser.ca/thunder-b...
Lightburn Software www.lightburnsoftware.com
MAC OS - Latest Version www.apple.ca
PiBurn "BOLT" GRIP Rotary www.lensdigital.com/home/prod...
Thunder BOLT 2.5" Focus Lens Kit www.thunderlaser.ca
Thunder BOLT 4.0" Focus Lens Kit www.thunderlaser.ca
ROKO Twister Tray computercreationz.online/prod...
Honeycomb Lay Flat Pins for BOLT www.etsy.com/listing/15950830...
IMPORTANT: Lasers often project images that resemble strobe-type effects. If you suffer from health conditions such as, but not limited to, Epilepsy or Light Sensitivity, please do NOT watch these videos.
IMPORTANT: I am a brand new Laser User. These videos are provided based on my continuing learning experience. I am not an expert. These videos reflect my learning experience and are not provided as expert tutorials or expert opinion. Consult your manufacturer and/or manuals for your laser-specific requirements. These videos are intended for entertainment purposes only and are NOT provided as instructional content. - แนวปฏิบัติและการใช้ชีวิต
Enjoyed your content today, I hope you’re enjoying my Twister Tray. Keep up,the great work!
LOL! _ I am - I realize now why it is so important to have one - there is only a tiny bit of room in there without it Robert so I can't do much bigger than a 3" tumbler without it. Will talk about it soon on an upcoming video. Thanks again!
Great video! I’ve also noticed quite a difference in adequate settings across different colors. Ultimately, my settings came out pretty close to yours. I will definitely go back and try the LPI you used to fine tune getting those pesky lines out.
At the end of the video, you talk about the taper and the appearance of your logo… the taper didn’t affect the stretch. Your SPR was set to 10000. I believe it is supposed to be 8050. With the correct SPR, you may have needed to stretch the logo about 8-10% on the height to accommodate the visual appearance of a circle logo on the round object.
Look forward to more of your content. 😊
Good morning Lisa - thanks for the great advice. I think you are right on with both points and greatly appreciate the advice on increasing the circle by 10% as it helped alot after I adjusted the SPR. Appreciate it very much - have a great week!
Hi Gord, I find on my laser I have to do a circle test on each diameter piece that I want to engrave. To do this I put blue tape on my tumbler/round object and create a 1" or 2" circle in Lightburn. I turn my power way down so that it just engraves the tape but doesn't cut through. Measure north south and then east west on your design. On a round design they are usually off. Then change your steps per rotation up or down and run it again. I keep doing this until I get the circle perfect. Keeps notes of your new steps per rotation for that particular piece (16oz wine tumbler) so that you can use it again the next time you do one. It takes a little time but it's a one time thing for each different size tumbler, dog bowl, etc. I hope that helps.
That helps a lot Dailey! Thank you so much for your advice and sharing your experience. I will give it a try soon. Cheers!
Great video!
Awesome Video, Sir
Thanks!
Another great video! I don’t get to play around with mine until the weekends because I work during the week. I don’t have the rotary attachment for the Bolt aka “Zeus”. I do have it for my Xtool F1. I might take it out of the box and give it a try. You made it feel less intimidating. By the way, I love your apron.
Thanks Janine! Lensdigital just released a new model specifically for the BOLT - they just issued a youtube video - check it out when u have time. Have a great weekend!
FYI, when you are tracing your image and want to see the tracing better and know what it missed click the fade image button.
Thanks - I'll give it a try. Have a good day!
Good Morning GP 😇👌👍OUTSTANDING INFORMATIVE VIDEO Sir and Keep Warm Cheers 👍👌😇🍻
Thanks!
Thanks so much! Have a great weekend!
Wow Gord…
They to my eyes all look Great..
Boy I would love one of those Tall Coffee cups.. Just like the one in your thumbnail.. (hint hint) I would be more than happy to pay for it…
I am very impressed with your new retirement hobby..
Thank you for sharing this new adventure with us.. I am looking forward to more..
Cheers my friend..
Say hello to Carol for us..
Hey thanks Gus! Can you email me at gordpotter55 at gmail dot com. Cheers my friend!
Yep - You need to modify the graphic for tapered items. I hear lightburn 1.5 is going to be able to do it automatically.
Thanks Tetra!
Hi G.P. I don’t see how you remember all that stuff, but it looks great. I hope you’re having fun. Thanks for the video
AWESOME . So cool to watch. Fred.
Another great informative video Gord. We use Bar keepers friend and a magic eraser. We find if there is any stubborn residue, if we get the cleaner set on there a few minutes, it comes off easier. I noticed that your materials settings didn't have an option for overscan. I wonder if the bolt does not have that option? It basically lets the laser head move past your engraving so you don't get scorched edges.
hey thanks MDIY! It does but I have not learned how to use it yet. Thanks again - I will try to research more into the overscan function soon. Cheers and thanks again!
I wondered about the tapered shape...look forward to learning how that is handled! Cheers Gord. 👍
Excellent!!!
Honing your skills. Nice work Gord. Cheers, Mike.
Good job Gord very nice work take care
Sure is nice machine Gord! Very informative video! Thanks for sharing! Cheers!
Make sure you keep your air assist off and the build up your mentions should go away!
hey thanks very much - super helpful. Have a nice weekend!
Are you defocusing gord?
Good morning - No, I don't usually. I have tried it a few times but I don't defocus.