How to Replace Multifunction Switch 95-99 GMC K1500
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- Buy Now!
New Windshield Wiper Switch from 1AAuto.com 1aau.to/ib/1AZC...
1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, faded, worn or faulty multifunction/turn signal stalk, high beam and wiper switch. This video is applicable to the 95, 96, 97, 98, 99 GMC Sierra
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/o8N/1AX...
• 8mm Wrench 1aau.to/oce/1AX...
• 10mm Socket 1aau.to/oPv/1AX...
• 21mm Socket 1aau.to/opi/1AX...
• 7mm Socket 1aau.to/oPv/1AX...
• Steering wheel puller
• Side Cutters
• Snap Ring Pliers
• E5 Socket
• T25 Driver 1aau.to/opj/1AX...
• 1/2 Inch Breaker Bar 1aau.to/ojg/1AX...
• Torque Wrench 1aau.to/osX/1AX...
• Pick 1aau.to/ogH/1AX...
For More Info visit us at 1aau.to/h/aX4/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
WoooHooo. Just changed mine out W/O removing the steering wheel. The Torx25 on the face of the multi unit was the only tough one. Used the Torx bit w no driver and turned it with a 1/4" wrench. Thanks for the tutorial. 2 hours start to finish. Remember to move your electric seat all the way back b4 disconnecting the battery. I forgot & cost myself some unnecessary agony. Good luck with yours.
Thanks for all the help. I single handedly fixed my truck. Changed my shocks in the front and the back. changed both leaf springs. And replaced the water pump last week. today I changed the Multi function switch!! all by myself with only your video aide. I have a new truck!! thanks for your knowledge. I sincerely appreciate you.
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +karma leglass
I very much appreciate that 1A Auto takes the time to make the DIY videos. I have referred to them many times and have bought parts from them as an appreciation. The parts came fast enough and were good parts.
A lot of people commenting that they had funky stuff happening like other lights flashing instead of the turn signal. Check your grounds. 12v is crazy in how it tries to find a ground when the expected ground goes bad.
I had a friend replace every part in his ignition and throttle body injection and the known good engine ran bad. Hold my beer and watch this. I took a jumper cable from the negative terminal and put it to the alternator bracket. The engine smoothed right out. He almost fainted. One engine ground had rusted apart and one was almost there. Learn from that. $500 later he sure did.
+Ray Booth Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Cool you took the time to take something apart that wasn't broke and on top of that put it back together. Thank you for share that information with us!
+Sr LiLLo Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/windshield-wiper%2c-high-beam%2c-hazard-light-switch/i/1azcc00007?TH-cam&CTA+Comment&Scoqc-h_N6Q
Thank you for the video. It helped me a lot with this install. However, I did not remove the steering wheel. I was able to work around that.
Yeah man how?
@@GamesWorld41 steering wheel is rubber like, use trim tool to bend it around hard plastic trim
I read your comment then went ahead and did mine without the extra 20 minutes of wheel removal. Took 10 minutes tops.
How did you get the screw out that's behind the steering wheel, @ 9:00
@@levelseven9841 I used t25 bit and pliers
I truly appreciate your time in making the video. Not only was it appreciated but highly useful in changing out my multifunctional switch. Don't believe I could have done it without your video. Thank you very much..
+Barry Guy Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Great video! I was able to do this without removing the steering wheel, after seeing some of the other comments. Just used the T25 driver and a 1/4” open ended wrench to get the one bolt out.
"SHORTCUT" 1/14/18. Thank you for video! I just replaced my multifunction switch and I bypassed taking off the steering wheel by using a star bit with a pair of vice grips on to it worked like a charm.
I'm curious. Where, and how did you do this? I'm looking at doing the same repair myself, and would like to avoid buying a bunch of new tools.
That's exactly what I'm doing :-)
Used two ratchet extensions and didnt have to remove the steeringwheel either for the bottom t25 one.
Yep no steering wheel or air bag removal needed
Nice tip.
This guy was great. He explained things in such a way that you instantly see what and why. Nice job!
It was definitely harder than it looked with getting the wiring out, but the video was a lot of help. Thank you
Can't thank you enough. Was a bit apprehensive about this project, but it was a piece of cake. Will purchase from you in future.
Excellent! I am still woking on trying to find and loosen the two 7mm lots holding the harness in place. I am working on a 2002 Buick Centry
Thanks for you informative video,
Bob
Just a side note to anybody thats doing this job " you do not need to remove the Steering wheel" they remove the steering wheel for easyer to work but i changed my switch without removeing my steering wheel or taken out my ignition switch or takeing off the top plastic on steering wheel the only thing i had trouble with was unpluging the harness from main harness under dash after removing the two screws take me about 15-20 mins to wiggle the plug loose to unplug.. fairly easy job in afew hours..
I was looking this up, because I had a friend doing this repair and I am amazed that a auto would be designed in such a way, that makes it hard to repair
Thanks for sharing
So constant high beams are not so bad after all :-)
LOL my hazard switch needs replacing, dreading this :D
Thats exactly what happened to me tooo
@@sajen23 did you get around to it yet? If your turn signals and wipers, cruise etc. works and it's just your hazard lights not working you can replace just the hazard switch without doing the whole multifunction switch. You don't even have to remove the trim around the steering column. If you look down at the hazard switch you can see an area where you can stick in a small flat blade screwdriver and release the clip that is on the side of the hazard switch facing the front of the vehicle, you won't actually be able to see the clip but you just need to get a small screwdriver in there and make enough of a gap in there to pop it free then you can work the trim around enough to be able to pull the hazard switch all the way out without actually having to remove anything else. I got one from a junkyard but they have one on amazon too www.amazon.ca/Dorman-924-608-Hazard-Switch/dp/B003S15WQU The amazon one says it's not compatible with the gmt 400's but if you read the reviews it will work.
All in all a good tutorial. You did not mention the reinstall of the snal ring on the steering shaft before putting on the wheel however.
Thanks to this video you convinced me, I'm almost 70 years old that I should take my vehicle to a professional. He had my vehicle for about 40 minutes from start to finish. A lot faster than it would have taken me if I would have tried.
you could have done it they made it look harder then it was and yea if someone had done it a few times it is a easy 40 min job or maybe 1 hour for someone first time
Wow, great video. It looks like a lot more work than I had hoped it would be.
+rbhusana Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
1996 Buick Riviera owner here, that switch looks EXACTLY like the one on my car although it never is shown to be an exact replacement. I think I am going to buy it and find out if the wires are different and if so I'll make them correct. There are 2 tiny 2 pin connectors that are in mine that come out from the end of the harness away from the lever that have nothing to do with the lever itself I will have to splice into the new harness but that is an easy fix. My right turning lamp lights up solid every time I hit the brakes, if I pull on the lever like I am just about to turn on the high beams it goes out. First I am going to disassemble and see if it just needs cleaned out. I'll find out what's going on inside first. I might even make a video as this appears to be a real problem no one has addressed or identified in the forums and these are discontinued since 2012.
wow, what an OUTSTANDING video. Thanks for taking the time and effort to create it. Awesome job. thanks again. '97 K3500
Thank you 1A Auto. Great video. Steering wheel doesn’t HAVE to come off but I see how it can make it easier if you don’t have the right tools to get that last torx out on the switch itself. I will be buying more parts from you in the future. Great videos.
+Travis Wade Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Great video but I have one question. Why do does the snap ring have to be removed and you didn't mention putting it back. I assume you put it back on but didn't cover doing so...
Thanks so much for doing this, whatever they pay you it's not enough! I couldn't un clip the two wire over the column connector. I just cut the old harness and spliced in the new one.
+Bob Beasley Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
I watched the video beginning to end just to see if I thought I could tackle this. After deciding to do it I would watch one step, pause the video, complete that step, then move on to the next. Job complete an in working order. Thanks for the tutorial.
+classicrider103 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Thank you for the great video, it made the project so much easier! I see why they wanted so much to replace it at the dealer. I was able to do it in my driveway with the tools I have (had to pick up a Steering wheel puller... 36 bucks @ Harbor frieght for a nice kit!) it worked perfect. the hardest part of the job was getting my big as* under the dash! thanks again!
+Jamie Cornwell Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
you and me both, the part about getting under the dash, LOL
By far the best instructional video ever!
On my 95 f150 this is a simple matter of only a few screws and a wire harness connection. On my 97 K1500 Suburban it is totally GM = GENERAL MADNESS. WTH were they thinking? Never mind, they were clearly not thinking at all. I actually worked on an auto assembly like once and this is in reality building the freakin thing.
+Totally Fem Metal Channel Thanks for the feedback!
Great video! Told me everything I needed to get the job done. Would have taken me a long time to figure it out on my own. Bought the part from 1A auto and it fit perfectly.
You can bypass pulling the steering wheel turning the steering wheel (top, 12 o'clock) to about the 8:00 position (drivers door). This will give you access to the torx bolt that is hidden by the steering wheel. I would still pull the fuse for the airbag since we're messing with the steering column wiring, just for the heck of it. Hope this helps.
OMG Best video ever on this process. THANK YOU so very much OMG!!!!!!!
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Glad your wheel came out that easy
Very well done.. I've just found out that I have to replace my switch an I've never done one before however I am a good mechanic I seen this video and I'm going to give it a shot well narrated
Great video and much appreciated. Swapped out my multifunction and ignition switched together.
Thanks a bunch for the video on this job. Will help with my newly acquired 99 Tahoe. I utilize your videos quite a bit and appreciate the production level you guys and gals have on your channel.
I pray you make a lot of money doing this
the time is incredible!!
Video was enough to tell me I don't want to do it, scared of electrical stuff amd moving around this many wires.. is not something I want to be doing. Going to look at a few more options..
Thank you video was very informative. Please keep making videos like these for these year trucks.
Don't forget to reinstall the snap ring on the clock spring before installing the steering wheel.
if you do not remove the airbag and steering wheel it is not a issue with the snap ring either as someone stated before seems they left in footage from another repair in this repair that was not needed... you do not need to remove the Air Bag or Steering wheel to do the job
I have to change out my switch stick because my BRAKE LIGHTS dont work or dont light up when i step on the brake pedal. But every thing else works blinkers park lights emergency lights.but not the brake lights. I even changed out the brake switch at the pedal but wasn't the problem. So the stick is the problem i found out. Just wanted to put this problem out to yall if yall r having the same issue with the brake lights.👍✌
Thanks, knowing whats coming helps when having to pull alart a donor vehicle in -14f as fast as possible
Outstanding video 1A! Love your customers service and part selection.
+Michael Young Thanks for checking us out! 1AAuto.com
6 point 4mm. Yup. That works. I heard 6.4mm and I was like who has that size on random.
You guys should sell the dash plastic too for us out west folks. I am predicting a lot of broken plastic.
+the4thj We’re always updating our inventory so check back soon! Thank you for trusting us to help you find the parts you need. Thank you 1aauto.com
Couldnt yous just skip the whole removing the steering wheel part and just pry off the plastic on the top and bottom?
I was thinking the same. I removed that plastic to change my ignition lock cylinder and it was incredibly easy to remove. Taking the steering wheel off seems more of a hassle than anything else
@@Andrew-rk2ic let me know if that worked some asshole busted into my.truck in an attempted car jacking. Fortunately they were unsuccessful but they busted my switch and top and bottom covers. Before I take vehicle to my dads (since h has all the tools) let me know if u were successful and maybe I don't have to make the hour drive out where he lives in a car with no turn signals
YOU FORGOT TO TELL PEOPLE TO PUT THE SNAP RING BACK ON THAT YOU REMOVED FROM THE CLOCKSPRING.
Correct me if I'm wrong, but I'm pretty sure you do not have to remove the steering/airbag, nor the cylinder lock. You can just rotate the steering wheel to get to the torx screw.
+kevin limparis We appreciate the feedback. Sometimes there are multiple ways to accomplish the same repair.
Now it’s been 1.5, almost 2 straight hours of my trying to get that thing loose. I’ve tried prying it with some flatheads, I’ve done it exactly the way the video says. The truck in the video is older than my truck, yet his slid right out while mine seems like it’s glued
Same happened with me. I had to use some wd40
Same here. I’m currently trying to take off the connections but they seem but o be stuck on. And the video they just slide right out. Any tips on how you got it
I completed this repair and now my "Air Bag" light is on. Any idea what I did wrong?
Can we all apppreciate how overly complicated GM made this job. They could have made that cover clamshell apart and run the harness up to the back of the tilt assembly. Secure the switch with fastners from the top and bingo thos becomes a 5 min job.
Will the multifunction switch cause a NO CONSTANT 12V to my brake relay under the hood? There also no power on the dark green wire or yellow wire at the main wire harness next to the column.
Changed bulbs and multi function switch and still my directional indicator (right) engages both right and left, thoughts?
Did it hard asf tho ion know how u got them pins out the way u did but I had to sneak in from the side pull them out and then it comes out
How do you remove the harness from the commectore under the dash
must be easier to change the multifunction switch with the hood removed
🤣🤣
yes it would before one goes to remove the steering wheel you need to unhook the battery and to do that removing the hood makes that job easier but if you want to do the job by removing the steering wheel might as well take the extra time to detach the hood
You dont need to remove the steering wheel for this. And the hood lol
How would you know if the switch is still good??
Ive done this twice on my ,98 sierra. TRUST ME you do not have to pull the steering wheel or airbag. Get a mini torx box wrench to remove the screws behind the steering wheel.
Thanks for the video. I now have the confidence to replace my switch by myself and not pay a shop.
Will the “Turn Signal Stalk” aid my brake lights to work. I change the brake light switch already.
I'm very interested in possibility of changing the gasket on my 1992 Subaru Loyale wagon
i found it easier to also remove the smaller plate, lots more room, and just two more bolts. the room is really tight.
Definitely helped me ,Thank you .Md ❤
Thank you Brother for posting
+Bible Boy Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
love it! here we? ( i go)
What if i changed the multifunctional switch and the relay for turn signals, but hazards stopped working? Only time hazards work is when i press the brakes with the hazard button up and holding it down the front right turns on only. Could it be wrong wiring or anything else?
I'm curious as to if this vehicle has a lift of any kind and what size are those tires? Thanks
When did you reinstall the c-clip? Did you replace the clockspring? 16:43 what alignment pin? I dont have that?..
Great video I really need some help I’m trying to fit new steering housing on my Chevy Astro 95 and I have removed the old damaged one but fitting the new steering housing I don’t know how to get the cam turn signal switch through the new housing and the multifunction switch? Do you guys have a video or some tips on how to do it. Would really appreciate your help as I haven’t a clue how to do it and there’s no videos on TH-cam.
My ignition cylinder pushed in the little rectangle where it goes in and now I can't put it in, what can I do?
Ty my guys!
Is this what I should replace if my signals only work when I toggle the hazzard switch? Turn signal relay is fine and everything else works, but occasionally I have to toggle the hazzard switch for blinkers to work.
You don't actually have to remove the snap ring btw
What a joke how many steps it is, but needs to get done. Great vid! 1997 C1500
Is the Green connector next to the gear selector unnecessary on a manuel. Because I cant find this connection on my manual k3500 98
What is that switch with the 2 blk/grn wire that it plugs into?
This switch working together when the stop light l have problems with my 91 chevy silverado no have stop light working
Thanks GM.. Wow...All to replace a damn turn controller.. Great video though. Thx
Did you know you could take off the blinker control without taking off the steering wheel
Well.. the snap ring removal seemed un needed. Th video also did not show this being reinstalled. I almost forgot it. No reason to remove it from what I see.
Replaced the multifunction switch now my wipers wont work , wiper motor sounds like it’s working but they don’t move neither does the mist go off. Any help
Could this be causing my high beams not to work? I looked at the fuse and it looked burnt so i bought a new one. Still the same problem, only low beams work, not high beams.
Has anyone else had any problems with pulling out the connector u set the dashboard? It’s not coming out.
can anyone tell me if the multi switch can be the issue of why my brake lights and rear turn signals dont work? ive changed all the relays, circuit boards and necesaary bulbs. still not working 😔
check your grounds
Thankyou for a super helpful video! It’s amazing how complicated they made these steering columns, and especially the switches.
+The Chrysler Crew Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
I forgot to connect the small two wires. What is it responsible for those two small wires?
Y’all act like pulling the wheel is going to kill you.
I'm trying to troubleshoot a blinker-not-working problem on a '99 GMC... if high beams and wipers both work just fine, could my problem still be with this multifunction switch? by the way, brakes lights and hazards work too, while swapping the blinker fuse (#16) blows it immediately.
Remove your front turn signal housings. Look for a small (VERY small) burn mark where the wire loom runs up into the housing. The wire loom has a small area that is not protected, and rubs up against the metal, wearing away the wire insulation, just enough (I mean, like the size of the head of a pin) to hit he body metal and short out. Drove me darn near nuts tryin to figure out what was happening. I simply wrapped electrical tape around the loom at that spot, and the problem was solved. It's a very common problem.
I have a 98 Silverado would this work the same with my truck? The problem with mine is when I push the switch down or up to turn the signals on nothing happens but my hazard lights work so would this fix it?
I have the same problem. What did you do to fix it?
i replaced this a while ago. but i got a "new" peice from a junkyard. now everytime i turn my left blinker, it flashes my highbeams. my running lights do not turn on and my dash light only turns on when i turn my blinker. would it be this multiswitch again or should i look elsewhere
+TheFavess We are unable to diagnosis your vehicle, we do recommend taking it to a local mechanic. Thanks for checking us out!
Just replaced mine and the left turn signal is stuck on...turns off when I hit the hazards but signals dont blink
Turns out it was set to left turn when installed,.reset it in there and works great. Thanks for the awesome video
You buried the lead!! That last connector, shown at 10:30, is the worst. Haven't released it yet.
Thank you!!
+Efren Palomo Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Anyone know if this fixes low beams not working?
How do I return a broken multifunction switch that I buy from u guys and arrive broken it take 2 weeks to arrive
Thank you for checking us out. Please feel free to contact us at 888-844-3393 and a member of our customer service department can further assist you, thank you! +horacio ramirez
My green arrows on the instrument panel that indicate signal turning are not visible even though the signals work and I can hear clicking. Is this anything to do with that? Thanks
No, those would be the lights inside the gauge cluster if the blinkers are actually working.
Will this work for a 97 GMC JIMMY? Also, ever since the ignition was replaced, my cruise control & high beams don't work. When I turn on my headlights the hazard arrows stay on in the panel and the high beam indicator lite stays on, so I'm thinking the high beams are on all the time. Any suggestions?
+Carolyn Simpson The part shown in the video does fit your application. It should be the same or a similar procedure. Here is a link to them on our website. Hope this helps you out. www.1aauto.com/windshield-wiper%2c-high-beam%2c-hazard-light-switch/i/1azcc00007?TH-cam&CTA+Comment&Scoqc-h_N6Q
Do you absolutely have to remove the steering wheel cuz it seems like a quite a bit of work for a $40 part
+Wyatt Yates Yes, you need to remove the steering wheel to complete this repair.
Ok.. I have a question. I bought the replacement "Cruise Control " lever they call it that, blinker switch, Cruise control, Wiper blades etc. So how do I just change that piece, comes with I believe 2 wire connectors. Thankd.
+Mr, Boo Boo 1972 Thanks for checking us out. This video should walk you through how to change this for the applications listed in the beginning. If yu have another year or model, it may be the same. You can also check out our library to see if we have a video on your exact vehicle 1aau.to/m/video-library-c
@@1AAuto Thank you for taking the time to Respond. Yes I have a 1994 GMC Sierra K-1500 5.7l V8 4x4, I red to change the Headlights switch "turn on / off Headlights , the switch itself and just the cruise control, blinker, wiper blade controls... just the black 8" piece ..it has the one round wire coming out and has a plug In on end. Thanks again.
What's that switch called?? where you plugged in that little harness with 2 wires recently bought a pickup that part is missing but don't know the exact name of it
why do you have to remove the steering wheel got mine off fine without doing so