Hey fellas since i seem to have failed to make it clear enough in the video what clear coat i used i'll add it in text here too its Cab Coatings Hard. I probably should start adding texts in the video when ever i say i use a spesific brand etc . thumps up if i should do that?
@@corneldelport7490 this is not a very well known fact but its is a fact. before Adam and Eve there was Steve. Steve had a bad habbit of getting a little too friendly to the animals ( you know what i mean, dont even try to tell me you dont) in the garden so God zapped him dead with a lighningbolt and decided to start all over again but then Eve fucked it all up again and they got booted out from the garden never to return.
@@SolarfallBaits Yet thank you for that bit of info . Down here where i live right opposite you at the bottom of the globe it is difficult to come by goodies .
If i had the money i would make a collab with solarfall baits. I make some pretty sick looking baits as well. Check out chris mccuaig on you tube. Or just click on my icon.
@@SolarfallBaits Its true, fisherwomen are rather scarce, some with hunting, AAND i suggest to anyone who find one they get along with/like, to hold on tight for THATS A KEEPER! LMAO 😂👍👋🐔
@@donfields1234 Tell that to all me exs. All of them but one refused to go fishing. The rare one went once and never went again and he used the excuse that he "never catches anything". New requirement for dating? Yeah. Must enjoy and go fishing. That probably explains why I've been single for 7 years. 😂
good work. A lot of love in this lure, and great to see sand/sand appoxy as an ingredient which makes it extremly unique, Thumb up and best regards from germany, chris
Been fishing for over 45 years, made a few lures & Might (?) be able to make the spoon but that Paint Job No friken way ! : ) Absolutely Amazing technique - Beautiful!
Just a thought, could you carve the wood first then add the wire then mold the sand directly to the wood? It seems like it might be faster and easier and might even eliminate the need for the tin can. Thanks for your videos, I always enjoy them.
Next time you use super glue to stick line ties, just sprinkle baking soda (bicarbonate of soda) on top. It hardens like an epoxy plastic and can be filed and sanded. Keep building layers of superglue and sprinkle bicarb till it's covered. Super strong and can be used to plastic weld just about anything. Try it!
Came here unknowing of your channel, expecting some hodgepodge dirt thing, and left with the realization that you can make a pretty damn cool thing with some wood, paint, sand, and epoxy. Nice job
I have been successfully fishing the pikequiver from Bluefox for several years. It has a similar shape and is also designed for shallow water. This is made of sand and wood.... Daring but cool 😎
Quite creative with a beautiful and functional result. I am hoping to start making my own large spinners ( for when I am retired). But this goes so much further. Very well made. Such creativity has to be watched regularly. Thanks for sharing.
If you're making a symmetrical template, fold it in the other direction and draw half of it. Then you only have to make one cut of half of the design rather than cutting it out twice.
thanks Dieter im not all that fantastic with spoons yet so there is plenty of room to improve. btw if you still remember the spoons you send me years ago, they have worked wonderfully in my area, caught a quite a few pikes with them.
@@SolarfallBaits I remember , that I had sent some spoons to you , but do not remember the particular models anymore . I'm happy to hear , that they have worked for you , anyway . Regarding spoon fishing and also spoon making , I have always been focussed on heavy spoons , since the waters I used to fish , were up to 15 m deep and I wanted my spoons to run as deep as possible . But today I also see a need for slow sinking , yet sufficiently heavy for casting , spoons like the ones , you've kindly introduced i this video . Years ago I had made experiments with spoons made our of such two-component repair clay : www.amazon.de/2-Komponentenkleber-Befestigung-Rollenhalter-Seifenspender-Accessoires/dp/B004KQV1TO/ref=pd_lpo_sbs_60_t_1?_encoding=UTF8&psc=1&refRID=DKETDG14YHMESJ8SQCB6 Sadly this stuff is pretty much expensive , but sometimes they sell no-name products in discounter special offers , which come quite a bit less compared to the brand name prices . To render the clay spoons heavier(the cured clay itsself is quite light , but still heavier than water) , I had gathered lead chips , filed off a chunk of lead with a coarse file and evenly worked these into the clay before finally creating the spoon's shape . One has to be very quick in doing so , as the processing time of the mixed clay ist only a few minutes before it starts to set . Made two spoons this way free-handed , using a mold would have surely been of advantage , ...one of these spoons turned out to work great , the other , a more slender one , got too heavy to wobble well .
I have used that very material before just not on lures though as its rather expensive and i tend to keep the expenses low. Its more challenging to make due with less tools and gadgets and keep it ghetto
WAHOUUUU ! ! ! Wonderfull work ! in the beginning I thought " what ?!?! what is he doing ?!?!?! Very clever work, and beautiful ! CONGRATULATION SIR ! Emmanuel from Paris, France
They also work fantastically for pike in shallower lakes and ponds, especially in the summer, when the weeds are high. Really like using those, when the pig softplastics I usually use are, well, too big.
I don't agreed that this is a sand lure. I'll treat it as a art. It's really nice and I'll keep it as collection item. Good on you and keep it up please.
@@SolarfallBaits There is a company online called "ETSY" which sells fine particle metals including cooper,brass and other such metals for craft projects. One bag goes a long ways for lure making. These make super material for lures as they catch enormous amounts of light and cause the lures to flash brilliantly in the water. You apply them just like you did with the sand
Another way to add tremendous flash is to buy a sheet of holographic foil and use a hole punch to make multiple small discs. These discs then can be layered in rows on top each other starting with the bottom to top and will make fish scales . Then add the finish coat when all the additions are done Similar lures with such scales can run as much as $ 60.00 or more as there is a market for them all over the world. Musky, pike,Zander, Nile perch, Barramundi . Peacock bass, anglers to name just a few from the different continents that want high quality lures.
Fantastic video! My first time watching and am now subscribed. Will comment more on lures I would like the see for large mouth bass, later, There are some things I would like that I just can't find. Couldn't use your large lures but might get one for the house as a work of art!
When you cut out your template you could have saved yourself a step by folding the paper the other way and then cutting it out. Also if you want to sort mixed sand/particles try either vibrating it or repeatedly tapping the container to make the large particles rise to the top and the finer grains sink to the bottom. Cool lure though, well done
I made one by weaving wire together and covering that in 5 min epoxi, rotating while it cured. The construction concept worked pretty good, but the shape i made was terrible. Might give it another go though!
Чтооо?? Это он сделал блесну??? Такая кропотливая работа, чтоб сделать просто блесну? Это же супер сувенир, подарок, но не для рыбалки, а на память. Да пошел купил за 100рублей блесну, прицепил, забросил и поймал такую же щуку и нет таких художественных проблем. Странный художник.
Good Evening SolarBaits first time watching the video I live in Puerto Rico being here for couples of months n very nice lure keep it up bro, it very cool Work. Let me know where i get some to use them too
Hey mikko, dont care about the punks who want to steal attention at the comments! I've learned realy much about luremaking thank to you! Let the hater talk stupid shit. Love youre artwork and thanks thousend times that you share youre expirience to us and spend that much time to make this vids! Stay tuned dude!
If im perfectly honest its kinda intertaining to poke fun of the trolls, its not like i take any of them seriously, after all its desperate attempt to seek attention and im more than willing to give it to them and just point and laugh😎
Hey fellas since i seem to have failed to make it clear enough in the video what clear coat i used i'll add it in text here too its Cab Coatings Hard. I probably should start adding texts in the video when ever i say i use a spesific brand etc . thumps up if i should do that?
Thank you for that .
Always wanted to know .
But that is like asking .Who came first ..ADAM OR EVE .
@@corneldelport7490 this is not a very well known fact but its is a fact. before Adam and Eve there was Steve. Steve had a bad habbit of getting a little too friendly to the animals ( you know what i mean, dont even try to tell me you dont) in the garden so God zapped him dead with a lighningbolt and decided to start all over again but then Eve fucked it all up again and they got booted out from the garden never to return.
@@SolarfallBaits Yet thank you for that bit of info .
Down here where i live right opposite you at the bottom of the globe it is difficult to come by goodies .
marling baits collab?
SolarBaits hey what’s up man? Do you sell your baits? And where can we buy your stuff if so?
Still waiting on that solar and marling baits collab, solar makes a bass bait and marling a pike or perch one
If i had the money i would make a collab with solarfall baits. I make some pretty sick looking baits as well. Check out chris mccuaig on you tube. Or just click on my icon.
Yes
you mean...marling makes a GOOD bait, with actual skill and craftsmanship and most importantly: funny jokes, man!
@@Snazzy_Pantz no i mean 2 bait making channels make a bait for the respective species in each other's country
Ok.. I'll 'bite' lol You have female viewers too Brother. I enjoy watching the creative process and test runs. Thx for sharing ✌
Your in the 3.7% of my youtubes lifetime viewership based on gender, amazing, your more rare than big pikes in my videos!
@@SolarfallBaits Its true, fisherwomen are rather scarce, some with hunting, AAND i suggest to anyone who find one they get along with/like, to hold on tight for THATS A KEEPER! LMAO 😂👍👋🐔
@@donfields1234
Tell that to all me exs. All of them but one refused to go fishing. The rare one went once and never went again and he used the excuse that he "never catches anything".
New requirement for dating? Yeah. Must enjoy and go fishing. That probably explains why I've been single for 7 years. 😂
Holy, that's a gorgeous bait. The sand looks amazing with the clear coat finished!
It always very good to watch videos about making diffrents lures
Marling Baits sent me here and I'm glad he did
yeah me too
I'm a girl and I've been watching your video for a long time. I make fishing lures and love watching you make yours!😀
Always great to hear that ladies are enjoying this hobby too, thanks for watching.
This might also work using old blue jean cloth soaked in epoxy. Kinda like making knife scales.
Would this be like blue Jean micarta?
@@Memorymode yep
good work. A lot of love in this lure, and great to see sand/sand appoxy as an ingredient which makes it extremly unique, Thumb up and best regards from germany, chris
Been fishing for over 45 years, made a few lures & Might (?) be able to make the spoon
but that Paint Job No friken way ! : ) Absolutely Amazing technique - Beautiful!
Just a thought, could you carve the wood first then add the wire then mold the sand directly to the wood? It seems like it might be faster and easier and might even eliminate the need for the tin can. Thanks for your videos, I always enjoy them.
Thanks for the video it was interesting and some of your comments pretty funny. Thanks again for the inspiration.
That is some serious workmanship dude.. pretty sure it was worth it..
Great stuff again! The sand looked great with the clearcoat finish 👏
Next time you use super glue to stick line ties, just sprinkle baking soda (bicarbonate of soda) on top. It hardens like an epoxy plastic and can be filed and sanded. Keep building layers of superglue and sprinkle bicarb till it's covered. Super strong and can be used to plastic weld just about anything. Try it!
You dont really need that, the mix of sand and epoxy is already plenty strong.
Lure making is so peaceful
One day I’ll spend my days making lures
Why wait when you can pick up a knife and just start. Go for it dude take the day! Carpe diem and all that stuff 💪
Came here unknowing of your channel, expecting some hodgepodge dirt thing, and left with the realization that you can make a pretty damn cool thing with some wood, paint, sand, and epoxy.
Nice job
thanks for watching, "Some wise fella once said " the only thing limiting our potential is the lack of creativity.
Very creative - great airbrush/paint work!
Should be strong enough only using sand and epoxy. But cheaper to add on balsa wood? Great idea.
great paint job. Love the process.
Thanks kathleen
Have to admit, I was pretty skeptical at first....but it turned out great.
Catch and proper release. Fantastic!
I have been successfully fishing the pikequiver from Bluefox for several years. It has a similar shape and is also designed for shallow water.
This is made of sand and wood.... Daring but cool 😎
I'm bad at toasting people on internet...
But I love toasting bread in the morning
Nice work, must be expensive to make. "I'll sprinkle on some more coke, oh I mean sand!"
Thats a cracking lure mate 10 out of 10.
Quite creative with a beautiful and functional result. I am hoping to start making my own large spinners ( for when I am retired). But this goes so much further. Very well made. Such creativity has to be watched regularly. Thanks for sharing.
always good to see a fellow bait maker with an actual sense of humor.
"More curves than a blue headed body positivity advocate" made me spit beer on myself.
You sir are indeed a true craftsman!
Thanks 🙏
Some ladies are :) That lure is a work of art, I must check out some of your other videos.
BRILLIANT VIDEO/ POST MATE, AND I'M GLAD THAT YOU CAUGHT A PIKE, I'M GOING TO GIVE IT A GO MYSELF 😁. AND HAVE GO AFTER THE SPRING SEA TROUT
Have fun
Awesome video, it looked like a leech at first lol I dig it I never in a million years would’ve thought of this I’m glad you did make a video about it
Very enjoyable, I love your humor. And the lures aren't bad either.
A piece of art. Enjoyed watching this. Thx for the vid.
Nice hands, and good humor.
Nice Work Earthling
Pike like: Oh common man, SAND?! Really? Can't you make a Sushy at once????
If you're making a symmetrical template, fold it in the other direction and draw half of it. Then you only have to make one cut of half of the design rather than cutting it out twice.
Sure but i don't think the time gained from that makes that much of a difference in the end.
Name the first thing whats in front of you and he can make a lure with it👍
Very nice lure , Mikko , .......and absolutely creative !
thanks Dieter im not all that fantastic with spoons yet so there is plenty of room to improve. btw if you still remember the spoons you send me years ago, they have worked wonderfully in my area, caught a quite a few pikes with them.
@@SolarfallBaits
I remember , that I had sent some spoons to you , but do not remember the particular models anymore .
I'm happy to hear , that they have worked for you , anyway .
Regarding spoon fishing and also spoon making , I have always been focussed on heavy spoons , since the waters I used to fish , were up to 15 m deep and I wanted my spoons to run as deep as possible .
But today I also see a need for slow sinking , yet sufficiently heavy for casting , spoons like the ones , you've kindly introduced i this video .
Years ago I had made experiments with spoons made our of such two-component repair clay :
www.amazon.de/2-Komponentenkleber-Befestigung-Rollenhalter-Seifenspender-Accessoires/dp/B004KQV1TO/ref=pd_lpo_sbs_60_t_1?_encoding=UTF8&psc=1&refRID=DKETDG14YHMESJ8SQCB6
Sadly this stuff is pretty much expensive , but sometimes they sell no-name products in discounter special offers , which come quite a bit less compared to the brand name prices .
To render the clay spoons heavier(the cured clay itsself is quite light , but still heavier than water) , I had gathered lead chips , filed off a chunk of lead with a coarse file and evenly worked these into the clay before finally creating the spoon's shape . One has to be very quick in doing so , as the processing time of the mixed clay ist only a few minutes before it starts to set .
Made two spoons this way free-handed , using a mold would have surely been of advantage , ...one of these spoons turned out to work great , the other , a more slender one , got too heavy to wobble well .
I have used that very material before just not on lures though as its rather expensive and i tend to keep the expenses low. Its more challenging to make due with less tools and gadgets and keep it ghetto
5:30 to 6 minutes had me dead! 😂🤣😂
WAHOUUUU ! ! ! Wonderfull work ! in the beginning I thought " what ?!?! what is he doing ?!?!?! Very clever work, and beautiful ! CONGRATULATION SIR ! Emmanuel from Paris, France
"Has more curves than a blue-haired body-positivity advocate" LMAO!!! Not only is that slick.... it's TRUE!
They also work fantastically for pike in shallower lakes and ponds, especially in the summer, when the weeds are high. Really like using those, when the pig softplastics I usually use are, well, too big.
your about to lighten your thumb with the way your carving that wood! LOL
Dont worry i'm a pro 😉
Those spoons are magnificent, great work.
фантастика.....ты молодец. руки золотые
That's a bloody work of art mate cheers
OMG, the sharpness of ur carving night is on point man ;]
Nice to see a bait maker abit closer to home . Great channel and great skill you have
Cheers
You sir, are very talented. I'm gonna bing on all your videos and make some baits for the quarantine. Thanks Solar!
Sure enjoy the vids
Incredible job and craftsmanship
So much sand out there so many lures
Love it. Your doing great my metal lure building brother.
I don't agreed that this is a sand lure. I'll treat it as a art. It's really nice and I'll keep it as collection item. Good on you and keep it up please.
Love your videos
Greetings from germany.
You are an artist man. Congratulations!
Great lure, lovely paint job!
Nice job! Pleasantly surprised.
instead of sand use fine metal shavings from a machine shop. These shavings can be colored as well.
Sure that could work too unfortunately i dont have a machine shop
@@SolarfallBaits There is a company online called "ETSY" which sells fine particle metals including cooper,brass and other such metals for craft projects. One bag goes a long ways for lure making. These make super material for lures as they catch enormous amounts of light and cause the lures to flash brilliantly in the water. You apply them just like you did with the sand
Another way to add tremendous flash is to buy a sheet of holographic foil and use a hole punch to make multiple small discs. These discs then can be layered in rows on top each other starting with the bottom to top and will make fish scales . Then add the finish coat when all the additions are done Similar lures with such scales can run as much as $ 60.00 or more as there is a market for them all over the world. Musky, pike,Zander, Nile perch, Barramundi . Peacock bass, anglers to name just a few from the different continents that want high quality lures.
This recorded video made my dog wag it's tail, I will thumbs this up now.
Marling Baits sent me! Looking forward to watching your videos!
0:40 "Yes i did" 🤣🤣
Fantastic video! My first time watching and am now subscribed. Will comment more on lures I would like the see for large mouth bass, later, There are some things I would like that I just can't find. Couldn't use your large lures but might get one for the house as a work of art!
Amazing work, well done !
When you cut out your template you could have saved yourself a step by folding the paper the other way and then cutting it out. Also if you want to sort mixed sand/particles try either vibrating it or repeatedly tapping the container to make the large particles rise to the top and the finer grains sink to the bottom. Cool lure though, well done
Yeah i can see how that would have been more efficient, but im not mass producing these so i don't mind one extra step.
@@SolarfallBaits Yeah it's not exactly a huge time saver but useful where symmetry is concerned.
Bluehead bodyposi comment killed me, thanks m8
Awesome video. So interesting! You are truly a master lure maker
Здравствуйте! Смотрел видео - работа потрясающая!!! Вы мастер, ваши рыбки словно живые!!! 👍
Hell yea never thought that was possible until I saw this video
I made one by weaving wire together and covering that in 5 min epoxi, rotating while it cured. The construction concept worked pretty good, but the shape i made was terrible. Might give it another go though!
yeah you should play around with the shape a little bit, never give up. Maybe check out some comercial spoons and how they are bend.
Work of art. ...
looks like a fine bait! paintjob is sick too!
Awesome work as always!
I enioy every of your creative projects🤘
great, you are an artist.
Awesome skills.
Greetings from Estonia. Nice job. Should have stuck with the through wire idea, just in case the BIG ONE comes along
Hello from Crimea! Respect and like! Sand is cool!
Sweet nice bait making..
Great friend, very useful greetings from Indonesia,
Чтооо?? Это он сделал блесну??? Такая кропотливая работа, чтоб сделать просто блесну?
Это же супер сувенир, подарок, но не для рыбалки, а на память.
Да пошел купил за 100рублей блесну, прицепил, забросил и поймал такую же щуку и нет таких художественных проблем.
Странный художник.
Sorry but i dont speak russian
@@SolarfallBaits craftsman strengers
man! what an artistic and creative work !! I rather buy one from you instead of making it myself though , too much work for me !! hhhhh
I love your videos, great sense of humour too. I build one-off lures as well out of some pretty unusual stuff. Keep posting my friend
do you think you could show us how to make a lure out of seashells next
probably not, i dont live by the sea
Your a miracle worker 👌😁
Beautiful piece of art, thank you
at the beginning...funny shit, already like you
keep up the humor
Good Evening SolarBaits first time watching the video I live in Puerto Rico being here for couples of months n very nice lure keep it up bro, it very cool Work. Let me know where i get some to use them too
WHAT??? THIS IS NOT MADE OUT OF SAND!!!
Jokes, i love your videos :)
Greetings from Brazil
It looks like it works great!
just gotta love the "offensive" jokes in the video XD
Fair play mate, they look pretty cool to be fair 👍
Now that's a paint job!
Tats one of a hell killing spoons....
Love to c more, job well done.
Max weight ....??
these are 40g, they sink pretty slowly but cast like a bullet
@@SolarfallBaits @ thanks for the information.👍👍
9:05 lol nice try 🤣🤣🤣
I’m glad I stayed and watched the whole video at the start I’m thinking what the fuck is he trying to do but wow this is very clever well done 👍
Thanks for watching Cameron
Your English is great.
Lol I have no shade to through. My dear on the sand. I live in Florida we have white sand. I may try it.👍🏼👍🏼👍🏼
Hey mikko, dont care about the punks who want to steal attention at the comments! I've learned realy much about luremaking thank to you! Let the hater talk stupid shit. Love youre artwork and thanks thousend times that you share youre expirience to us and spend that much time to make this vids! Stay tuned dude!
If im perfectly honest its kinda intertaining to poke fun of the trolls, its not like i take any of them seriously, after all its desperate attempt to seek attention and im more than willing to give it to them and just point and laugh😎
Thats the right way 😀