⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: th-cam.com/users/AutoRepairGuys ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Great job guys i have a 2013 3.6 journey. Your video saved me from junking the car because i could not find coolant leak causing car to randomly run hot. So now it will continue to run just for the cost of the cooler and my free labor.
Great job on the videos you provide 👍. I have a 2014 Journey with an extremely hard to work on 3.6vvt. From the infamous 6 cylinder tick to the current oil leak it's driving me nuts. More than anyone else you help me with information and how to make the repairs... thank you very much. Sadly, because of the engine design, the cost of repairs is greatly increased because of how much extra work is required to get to the parts...😭. Personally I can't afford it so I have to do the work or lose trade in value because of mechanical problems. So far I choose to keep this baby because in over 200k I've been blessed to be able to keep going without major break down...plus I'm amazed at how much value it holds. Anyway thanks again for the great videos. The least support and appreciation I can show is to listen to your adds...and not cut them off. Thanks again.
Thank you soo much! You have saved me thousands of dollars!!! Just replaced 2 rocker arms because of the the Pentastar tick using your video..every went great!! But now 4 months later I have this leak..so now I'm changing the oil cooler..you guys are amazing and I will be making a donation to your GoFundMe since you saved me soo much $$$ 👍💯💯
I had a huge leak, bought some dye put it in the oil drove the car for a bit then waited till sunset used the black light flash light and BAM ! That leak was sticking out like a sore thumb.Now your video was most useful the only difficult thing is remembering to not forget to hook everything back up the way its came off.
2022...... Just came back to see how to remove the fuel line to injectors and was happy to see the results. Great videos guys. Just don't scratch the watches or lose a gold ring inside engines.
the people saying you can do this without taking out the throttle body and such are right, but why would you not pull it out and do a cleaning when you have everything else out? especially on these POS Dodge Journey that everything breaks on em. found this very helpful, and am doing the entire clean and swap myself at home instead of $2500 at a shop
Nice job guys. Just have a question I am leaking coolant from there so I was just wondering if it could be a bad hose that I would need to replace no oil leak just coolent leak. Thinking about replacing the whole thing but the dealership wanted $400 just for the part
Same issue.. you can get the parts on Amazon or other places than from the dealership. Prices for this part on amazon are no more than 200 depending on who and what comes with the part
@@issacsantana4444 I'm so late to this but-the upper gaskets can go bad and it will leak coolant...the lower gaskets retains the oil...I've yet to find just gaskets for sale so replacing the whole thing is best...upgrade to aluminum(for some reason cheaper than the composite)
i have a 2017 Dodge Journey SXT and i have a water leak it looks like it is right under the power steering cooler on the back side of the cooler on the passenger side and right across from the first bolt so my question is dose water supposed to leak from there O and i appreciate the hard work and the effort that y'all put in y'all's work and videos to help people that u don't even know to teach them how to work on there car's and for them to save money so from the bottom of my heart thank you because i know i i appreciate and i know everybody else dose
Hello, i'm from Brazil and fix my car by my self when its possible...Please let me know what is the tork after replace the oil cooler? Tks in advanced... You are doing a great job...
You don't really *need* to disconnect the wires from the injectors because it is possible to simply "flip" the manifold over (it will rotate clockwise after disconnecting the fuel supply line).
Good morning I have a question I bought new seals for the unit , how can I tell if there's a crack ? I don't see any should I put the new seal and see if it works?
I replaced mine 2 days ago on my grand caravan and it took about a hour and ten minutes it's crazy what you have to take off just to replace it. And theres no way it can cool liquid sitting on top of a hot engine. Truly is crazy
What about of antrifreeze, when you refill?? make something special when refill??? i have an issue, my antifreeze don't circule inside the engine, when i try to refill, not all antifreeze can return to the engine, what happen??? tks for your answer.
I did the same kind of job and I didn't have to take everything apart I took the boy from the intake manifold out and I just pull it out without having to take the throttle body and all that stuff out too much water for nothing and this video
Can you please tell me the name or part number of the foam that was very dirty you removed from around front ignition coils?? I had moles eat mine to make a nest in my engine and I can not find a replacement anywhere.
Thanks for the great detailed video. My journey mixes oil with the coolant I took it all out and about a new oil cooler I put it back together and drained coolant. It stopped overheating but it still leaked. Note: I have flushed it with water so many times to make sure it doesn't have anymore. It still managed to leak the oil again. Any tips on what might be going on? Thanks a lot.
Used this video to get the cooler out, the valley of the engine was full of coolant. It was a lot of coolant. The bottom of the oil cooler was cracked and all I had was gaskets so now I'm waiting for a new cooler to show up. I went with a newer model cooler, hopefully will fit. I compared photos, they look identical.
This is the second time in less than a year that I have had to replace that part (the last one lasted only 1 month ) I saw they have this part in aluminum now, do you guys recommend to use that instead? Thanks for the great videos!
Help me please I have a 2016 back lights don't work and won't start when I push pedal I change brake switch program key starter work but the back tail lights just won't work all fuses good help me please sir 🙏❤️
I see a lot of video's on this procedure. I have a 2007 town & country that is leaking excessive oil from somewhere. Do you know what years in the chrysler T&C's are known to have the oil cooler leak problem?? Do you know if a 2007 would have that issue?
If you are so kind to help me, I have Dodge Journey 2012 3.6 L and this oil cooler leak and I already changed the 5 gaskets and still water leak. what i need to do..thank you
They miss a couple of steps but y’all will find them on your way lol. Don’t forget to refill your oil and antifreeze. Mine took about 6 and a half quarts of oil and 1 gallon and half of antifreeze. Test drive your vehicle after all set and done and then check all fluids!
i just replaced all of this an forgot to drain and replace the oil. oil light came on followed by knocking noises. drained added new oil an has same result, milky on the dipstick with new oil any advice?
Hoping you squared this up-see the comment was 2 years ago...but "milky" means you got water mixed into oil so really hoping that didn't become a large issue for you...
I repaired the oil cooler the first time and it messed up. The first time it was just leaking coolant into the valley. After I repaired it lasted 3 months until I had a major leak. Oil got into the coolant. Car was in bad shape. I ordered another oil cooler (aluminum) and after replacing and then doing the coolant flush to remove oil from the system I still had a leak. I drove the car about 10 times to clean and flush with the oil out of everything. Drove about five minutes at a time. Wouldn’t lose fluid until I drove. Even if the car say idling for hours. I finally found that leak in the radiator cap. I got a higher end safety cap and then I noticed after we drove a few miles that coolant was again POOLING IN THE DAMN VALLEY! AGAIN!!! WTF!? This time though the coolant is leaking on the passenger side. I assume the pressure from the new radiator cap pushed the coolant through the cooler and made it unseal somehow. Any ideas? Nothing leaked again until I drove.
When I took my car to get the battery changed , the car shop guys struggled to remove those plugs , they didn't even bother putting them back in when they gave me back my car.
Go to a private garage, a private mechanic noticed mine was leaking and wanted just under $300. I had a warranty so at least i didnt have to pay at the dealer
Hello guys I have a Dodge Journey 2012 4 wheel drive SXT and it started overheating so I went ahead and change the thermostat and it still overheats so I found out that the oil coolant unit was broken from the gasket area and I went and replace that, I put it all back together bleed the line as I was putting the antifreeze and is it still overheating
Carlos Ortiz anytime its overheating check the coolant first. If you havent had a coolant flush the radiator could be clogged. Just had my radiator flushed at 95,000 miles
I have a 2014 dodge journey 3.6 engine I have a oil leak underneath the oil filter housing. So I took my car to the shop and they was supposed to replace the oil preasure sensor I drove the car for another month or so before I could get my car in for a appointment to get the leak fixed. However I was driving down the road and my check engine comes back on and then my oil pressure plummets to zero so I thought no big deal I'll just put oil in it and it would be fine boy how I was wrong. So make it sure i went got a diagnosis test done and the results was oil pressure sensor was stuck on close. I have a buddy telling me all I have to do is bleed the oil lines. Do you know how to do that? does anybody know
Oh...I forgot to add that lam watching very closely to see any other repairs, replacement parts and services that can be done, whether needed or not, while I have all of this taken apart.
The Autoshop is going to charge me with $1000 repair for this particular work my wife's car was overheating I don't know how they diagnosed this part to be the culprit of her car overheating I would like to know.
Hello. I am writing to you from Ukraine) please tell me about Engine Oil Filter Housing for 3.6 Jeep Grand Cherokee new restyling 2018 Engine Oil Filter Housing = fit for 2011? old 5184294AE = new 68596317AA ?
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: th-cam.com/users/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
Great job guys i have a 2013 3.6 journey. Your video saved me from junking the car because i could not find coolant leak causing car to randomly run hot. So now it will continue to run just for the cost of the cooler and my free labor.
You guys have saved me an absolute shitload of money with this video series on the Journey. Thank you.
Till this day!
And this day!
Great job on the videos you provide 👍. I have a 2014 Journey with an extremely hard to work on 3.6vvt. From the infamous 6 cylinder tick to the current oil leak it's driving me nuts. More than anyone else you help me with information and how to make the repairs... thank you very much. Sadly, because of the engine design, the cost of repairs is greatly increased because of how much extra work is required to get to the parts...😭. Personally I can't afford it so I have to do the work or lose trade in value because of mechanical problems. So far I choose to keep this baby because in over 200k I've been blessed to be able to keep going without major break down...plus I'm amazed at how much value it holds.
Anyway thanks again for the great videos. The least support and appreciation I can show is to listen to your adds...and not cut them off. Thanks again.
Thank you soo much! You have saved me thousands of dollars!!! Just replaced 2 rocker arms because of the the Pentastar tick using your video..every went great!! But now 4 months later I have this leak..so now I'm changing the oil cooler..you guys are amazing and I will be making a donation to your GoFundMe since you saved me soo much $$$ 👍💯💯
I had a huge leak, bought some dye put it in the oil drove the car for a bit then waited till sunset used the black light flash light and BAM ! That leak was sticking out like a sore thumb.Now your video was most useful the only difficult thing is remembering to not forget to hook everything back up the way its came off.
You guys have been a huge blessing for my dodge journey thank you!! Please don't stop making videos
2022...... Just came back to see how to remove the fuel line to injectors and was happy to see the results. Great videos guys. Just don't scratch the watches or lose a gold ring inside engines.
Thank you guys for being very detailed in this repair. My 2014 journey has the same oil leak. This video was very helpful.
I’m getting ready to do on mine too, same year. Have you had to replace the entire gasket?
Enjoy all your videos. I have a 2009 Dodge journey and your videos have helped me save lots of money doing mechanical work myself. Very helpful
Can you do one on installing a cold air intake on the dodge Journey sxt
the people saying you can do this without taking out the throttle body and such are right, but why would you not pull it out and do a cleaning when you have everything else out? especially on these POS Dodge Journey that everything breaks on em. found this very helpful, and am doing the entire clean and swap myself at home instead of $2500 at a shop
In 1500..
Nice job guys. Just have a question I am leaking coolant from there so I was just wondering if it could be a bad hose that I would need to replace no oil leak just coolent leak. Thinking about replacing the whole thing but the dealership wanted $400 just for the part
I have the same leak what did you do?
Had the same issue and dealer wanted the same and another shop quoted 267. I am going to just order the hose and replace it myself
Same issue.. you can get the parts on Amazon or other places than from the dealership. Prices for this part on amazon are no more than 200 depending on who and what comes with the part
@@issacsantana4444 I'm so late to this but-the upper gaskets can go bad and it will leak coolant...the lower gaskets retains the oil...I've yet to find just gaskets for sale so replacing the whole thing is best...upgrade to aluminum(for some reason cheaper than the composite)
i have a 2017 Dodge Journey SXT and i have a water leak it looks like it is right under the power steering cooler on the back side of the cooler on the passenger side and right across from the first bolt so my question is dose water supposed to leak from there O and i appreciate the hard work and the effort that y'all put in y'all's work and videos to help people that u don't even know to teach them how to work on there car's and for them to save money so from the bottom of my heart thank you because i know i i appreciate and i know everybody else dose
Subscribed! The dealership was going to charge me $1200 for this. It’s only costing me $450 to do it myself.
Good job sir i have same like the car same problm when i install the oil cooler after 3 days engine damage way can you explained
THANK YOU!! You explained every thing GREAT. I wished You Gentleman lived close 👌😉LOL
At 21:48 do you just man handle it up there or do I need to remove something else?
Thank you very much !!!! Like always you're the best
Thank you, very nice and helpful videos
Hello, i'm from Brazil and fix my car by my self when its possible...Please let me know what is the tork after replace the oil cooler? Tks in advanced...
You are doing a great job...
You don't really *need* to disconnect the wires from the injectors because it is possible to simply "flip" the manifold over (it will rotate clockwise after disconnecting the fuel supply line).
Good morning I have a question I bought new seals for the unit , how can I tell if there's a crack ? I don't see any should I put the new seal and see if it works?
I replaced mine 2 days ago on my grand caravan and it took about a hour and ten minutes it's crazy what you have to take off just to replace it. And theres no way it can cool liquid sitting on top of a hot engine. Truly is crazy
love this guys not play or cut some of part of the rec video like some mechanic basic tools doing the job good on you guys
What about of antrifreeze, when you refill?? make something special when refill??? i have an issue, my antifreeze don't circule inside the engine, when i try to refill, not all antifreeze can return to the engine, what happen??? tks for your answer.
Great job my problem with my Dodge Journey 2015 is the heater hose for the coolant that is leaking was looking for a video on replacing this hose
Very helpful walk through video thanks heaps guys!!!
Had mine replaced at the dealership, thankfully there was a warranty
How many Newton force in the OIL COOLER bolts when putting it back? tks for the excellent video!
Where to buy the o-ring set? Thanks
Autozone
Don't sell just the o-ring for upper-just the lower part of this(for oil)...
You guys are great! Thank you.
Can you do a video on how to assemble the power steering cooler line replacement video really really need help with this one
I did the same kind of job and I didn't have to take everything apart I took the boy from the intake manifold out and I just pull it out without having to take the throttle body and all that stuff out too much water for nothing and this video
What part of the intake manifold did you take out? Seeking clarification.
Excellent video thank you
It has happened to me too after I did an oil filter change at the jiffy lobe Rochester NY. go to the dealership those kids can cause you a big problem
What a fantasticly informative video!! Thank you for the video
Are the spark plugs under the coils?
On this case.. the oil leak was on the oil filter assembly?
Can you please tell me the name or part number of the foam that was very dirty you removed from around front ignition coils?? I had moles eat mine to make a nest in my engine and I can not find a replacement anywhere.
Thank you!
To 2013 journey and 2015 oil cooler is same?
Thank you. Great video. 👍
Is there no video of reinstation?
Where is the egr vale located
Cual es la calibration de los tornillos del intec y todos?
You guys are awesome thanks for saving me money... can you please link or name the gaskets that need to be replaced.
I spilled gas around the intake valve removing the fuel rail, how do you suggest to get it out?
Whatever you do, don’t vacuum it out you blow up your vacuum
Thank you.
After researching a bit it seems like once then fail they will continue to do so. Any idea why? It has to be something else forcing the issue.
How do I get the screws off the bracket at the front of the engine
Thanks for the great detailed video.
My journey mixes oil with the coolant I took it all out and about a new oil cooler I put it back together and drained coolant. It stopped overheating but it still leaked.
Note: I have flushed it with water so many times to make sure it doesn't have anymore. It still managed to leak the oil again.
Any tips on what might be going on?
Thanks a lot.
I'm no expert but a cracked block maybe. I hope not...
Great detailed video, I see water pooling and boiling at the base of the oil cooler and it looks like I'm going to have to try this.
Used this video to get the cooler out, the valley of the engine was full of coolant. It was a lot of coolant. The bottom of the oil cooler was cracked and all I had was gaskets so now I'm waiting for a new cooler to show up. I went with a newer model cooler, hopefully will fit. I compared photos, they look identical.
This is the second time in less than a year that I have had to replace that part (the last one lasted only 1 month ) I saw they have this part in aluminum now, do you guys recommend to use that instead? Thanks for the great videos!
What did you find out?
@@Katie-uj3xd I actually haven't changed it for the aluminum one, but yeah, the plastic one loses its shape with the heat in less time.
Will this help if your losing coolant
Great video
Are there any sensors that need to be changed?
Thank you. Very helpful..... Thanks again!
How do you know if it's bad oil cooler or just the seals?
Can they leak internally
Help me please I have a 2016 back lights don't work and won't start when I push pedal I change brake switch program key starter work but the back tail lights just won't work all fuses good help me please sir 🙏❤️
I have oil in the expansion tank dodger journey 2009 2.7 petrol. What could be the cause>
How do you do it on a 2.4 engine
Thank you bro
Also can you do a video on timing chain replacement for a buick enclave?
Lol that was funny.
Where you buy the seals
How would i know if my oil cooler is gone or is going bad?
I see a lot of video's on this procedure. I have a 2007 town & country that is leaking excessive oil from somewhere. Do you know what years in the chrysler T&C's are known to have the oil cooler leak problem?? Do you know if a 2007 would have that issue?
It's very likely. Is yours a 3.6L?
3.8L
If you are so kind to help me, I have Dodge Journey 2012 3.6 L and this oil cooler leak and I already changed the 5 gaskets and still water leak. what i need to do..thank you
What about if l cloos one of two lines of tho oil cooler
Also, could you make a video on how to replace catalytic converters? Thanks
If you need such a video you have no business working on card period
Quelles sont les symptômes d'un oil cooler défectueux
Just did one of these. There are 4 "O" rings between the aluminum cooler and the plastic base. These 4 were bad as well and leaking.
Any permanent fix for the cooler?
They miss a couple of steps but y’all will find them on your way lol. Don’t forget to refill your oil and antifreeze. Mine took about 6 and a half quarts of oil and 1 gallon and half of antifreeze. Test drive your vehicle after all set and done and then check all fluids!
i just replaced all of this an forgot to drain and replace the oil. oil light came on followed by knocking noises. drained added new oil an has same result, milky on the dipstick with new oil any advice?
Hoping you squared this up-see the comment was 2 years ago...but "milky" means you got water mixed into oil so really hoping that didn't become a large issue for you...
What was the total time it took to do this. About to help a friend
I repaired the oil cooler the first time and it messed up. The first time it was just leaking coolant into the valley. After I repaired it lasted 3 months until I had a major leak. Oil got into the coolant. Car was in bad shape. I ordered another oil cooler (aluminum) and after replacing and then doing the coolant flush to remove oil from the system I still had a leak. I drove the car about 10 times to clean and flush with the oil out of everything. Drove about five minutes at a time. Wouldn’t lose fluid until I drove. Even if the car say idling for hours. I finally found that leak in the radiator cap. I got a higher end safety cap and then I noticed after we drove a few miles that coolant was again POOLING IN THE DAMN VALLEY! AGAIN!!! WTF!? This time though the coolant is leaking on the passenger side. I assume the pressure from the new radiator cap pushed the coolant through the cooler and made it unseal somehow. Any ideas?
Nothing leaked again until I drove.
Having this issue with my promaster. Definitely over tightened my oil filter cap.
Why not just replace the oil filter cap?
I hav replas the oil cooler and i hav oil in water wat i doing
When I took my car to get the battery changed , the car shop guys struggled to remove those plugs , they didn't even bother putting them back in when they gave me back my car.
Same thing just happened to my Journey. Dealer wants $670. On a scale of 1-10 how hard is it to make this repair?
Go to a private garage, a private mechanic noticed mine was leaking and wanted just under $300. I had a warranty so at least i didnt have to pay at the dealer
Jeremy Ladue I ended up dot the job myself. Wasn’t difficult just time consuming.
اين يقع براد الدهن محرك ٦ سلندر ٢٠٠٩
Can you add the specs for tightening the bolts?
9 lbs
Cant you just take the bottom radiator hose off to drain the radiator..it seems almost easier
Hello guys I have a Dodge Journey 2012 4 wheel drive SXT and it started overheating so I went ahead and change the thermostat and it still overheats so I found out that the oil coolant unit was broken from the gasket area and I went and replace that, I put it all back together bleed the line as I was putting the antifreeze and is it still overheating
Carlos Ortiz anytime its overheating check the coolant first. If you havent had a coolant flush the radiator could be clogged. Just had my radiator flushed at 95,000 miles
I heard this part is a common problem
why did you take the throttle body off ? Why not just take it off with the upper intake ?
What the cost to do this job
I have a 2014 dodge journey 3.6 engine I have a oil leak underneath the oil filter housing. So I took my car to the shop and they was supposed to replace the oil preasure sensor I drove the car for another month or so before I could get my car in for a appointment to get the leak fixed. However I was driving down the road and my check engine comes back on and then my oil pressure plummets to zero so I thought no big deal I'll just put oil in it and it would be fine boy how I was wrong. So make it sure i went got a diagnosis test done and the results was oil pressure sensor was stuck on close. I have a buddy telling me all I have to do is bleed the oil lines. Do you know how to do that? does anybody know
Oh...I forgot to add that lam watching very closely to see any other repairs, replacement parts and services that can be done, whether needed or not, while I have all of this taken apart.
Is that blood on the towel? 😂
Why is the cooler so tiny?
35:30
Power steering cooler
What happens if you don’t replace it????
You and up without oil and then you need to Cheng the engine
How do you know it's bad? Oil cooler? Does car leak oil?
The Autoshop is going to charge me with $1000 repair for this particular work my wife's car was overheating I don't know how they diagnosed this part to be the culprit of her car overheating I would like to know.
Screw FB , TH-cam, Google for tracking my searches on how to.
Hello. I am writing to you from Ukraine)
please tell me about Engine Oil Filter Housing for 3.6 Jeep Grand Cherokee
new restyling 2018 Engine Oil Filter Housing = fit for 2011?
old 5184294AE = new 68596317AA ?
You should make a video in reverse. That fkn throttle body is a pain in the ass to get back on.