BMW R100 Cafe Racer Part 1 - A new project is in the workshop

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 ต.ค. 2024

ความคิดเห็น • 71

  • @alancampbell1008
    @alancampbell1008 3 ปีที่แล้ว +6

    Glad your not doing anything irreversible, that really is too nice to butcher. I've no problem when something like this is a dog and it gets rebreathed upon, but when they are as nice as that one... Good call 🙂

    • @forthebold
      @forthebold  3 ปีที่แล้ว +2

      My thinking exactly. Everything including the wiring loom will be kept safe and separate. And the colour isn’t the original either. It’s a bad paint job when you look closer

  • @Harvardsons
    @Harvardsons 3 ปีที่แล้ว +5

    Wow that is in such a good condition. Bought an R100 with my dad, we’ll be doing the same to it, can’t wait to see how you do it

    • @forthebold
      @forthebold  3 ปีที่แล้ว +1

      Amazing best of luck

  • @michaelbrown9363
    @michaelbrown9363 3 ปีที่แล้ว +1

    Love the R100T. I used to have a 1980. Great bike. Glad you’re doing reversible mods.

    • @forthebold
      @forthebold  3 ปีที่แล้ว

      Yeah apart from the colour that’ll be the only permanent change. But it’s not the original colour either.

  • @KingstonLaneWorkshop
    @KingstonLaneWorkshop 3 ปีที่แล้ว +6

    hats off to you for building four bikes at once in a garage of that size.

    • @forthebold
      @forthebold  3 ปีที่แล้ว +1

      Ha. Technically 3 as I’m not including the Maico. But yes is still taking up space

  • @ChadwickRider
    @ChadwickRider 3 ปีที่แล้ว

    That's a really clean R100 ... wish it was mine :)
    Fresh fluids. New filters. Sonic clean the Carbs. Adjust the valves (I hear some slight tapping)... and she's ready to hit the road!

    • @forthebold
      @forthebold  3 ปีที่แล้ว

      Is a super straight job. A little leak from the right cylinder that’s it.

  • @jaydrathsinhpuwar
    @jaydrathsinhpuwar 3 ปีที่แล้ว +2

    Aah will br one my most fav builds on TH-cam because
    1. For the bold
    2. R100😍🔥

  • @danielhahn55
    @danielhahn55 3 ปีที่แล้ว +1

    that sound is simply gorgeous

    • @forthebold
      @forthebold  3 ปีที่แล้ว +1

      Sure is. That wobble you get from the engine also is.

  • @holdawayt
    @holdawayt 3 ปีที่แล้ว +2

    Wooo excited to see what you do with it

  • @jamesruralsparkynz3504
    @jamesruralsparkynz3504 3 ปีที่แล้ว

    Stoaked for this build will be waiting in anticipation for sure 🤙

    • @forthebold
      @forthebold  3 ปีที่แล้ว

      It will be a quick but fun one for sure.

  • @anarchymotorz7541
    @anarchymotorz7541 3 ปีที่แล้ว +2

    Lmao "You have to book two weeks in advance if you want to stop" 🤣

  • @fred_e
    @fred_e 3 ปีที่แล้ว +2

    Thank you for being thoughtful about conserving the historic value of this bike.

    • @forthebold
      @forthebold  3 ปีที่แล้ว

      Absolutely.

    • @mooretto
      @mooretto 3 ปีที่แล้ว

      Absolutely:)

  • @paulthompson8613
    @paulthompson8613 3 ปีที่แล้ว +1

    This almost looks to easy for you always love the custom scene for these rides .Racer tv has some iconic BMWs on it' channel . Mongrel is still my favourite .

    • @forthebold
      @forthebold  3 ปีที่แล้ว +1

      Thanks. Yeah compared to the Mongrel or even the Ducati this will be a quick one.

  • @NickRusty
    @NickRusty 3 ปีที่แล้ว +1

    I dont know which project am I waiting to be concluded the most... Cheers buddy!!

    • @forthebold
      @forthebold  3 ปีที่แล้ว +1

      Thanks for watching.

  • @dannyhernandez2037
    @dannyhernandez2037 3 ปีที่แล้ว +1

    I love this bike, is totaly my dream

    • @forthebold
      @forthebold  3 ปีที่แล้ว +1

      It is a beauty

  • @mooretto
    @mooretto 3 ปีที่แล้ว

    What amazing bike! I would keep the original headlight if possible as it’s an iconic part of that bike.

  • @NorthernGrowsUk
    @NorthernGrowsUk 3 ปีที่แล้ว

    This i am looking forward to. I have just finished my cx500 scrambler build and now want to do s bmw r100 rt they make mad scramblers

    • @forthebold
      @forthebold  3 ปีที่แล้ว +1

      They do look awesome

  • @k.l.u6254
    @k.l.u6254 3 ปีที่แล้ว +1

    Been waiting for you to do an r100 build.

    • @mooretto
      @mooretto 3 ปีที่แล้ว

      Me too! Long wait

    • @forthebold
      @forthebold  3 ปีที่แล้ว +1

      Finally here

  • @twistedbmwdriver85
    @twistedbmwdriver85 3 ปีที่แล้ว +1

    Very nais bike, looking forward to see what you make of it🙂 Ps: you need the 16 cell antigravity for this😉

    • @forthebold
      @forthebold  3 ปีที่แล้ว

      I was looking at the 16 cell too, but the 12 cell CCA does match up too.

    • @twistedbmwdriver85
      @twistedbmwdriver85 3 ปีที่แล้ว

      @@forthebold I have the 16 cell on my r100 and I would never go down...I can promiss that you will need it. Specially when I dont use the bike it needs a little more cranking😝

  • @shmave20
    @shmave20 3 ปีที่แล้ว

    Love your builds would love to see you do an old 2 stroker street bike I have a Suzuki titan and am absolutely in love with the old strokers 5hat were the king's for so long

    • @forthebold
      @forthebold  3 ปีที่แล้ว +1

      There’s one 2 stroker on the channel and that’s the Maico. But any road bike 2 strokes are very expensive nowadays.

    • @shmave20
      @shmave20 3 ปีที่แล้ว

      @@forthebold that's why I mentioned the road bike and if ya picked up an old one not running for a project they are not expensive at all... Thank you for the reply

  • @dodger0101
    @dodger0101 3 ปีที่แล้ว

    Thanks for another great video! Those older air heads will sometimes have oil leak into the left cylinder if the bike is left on the side stand. Could be why you're getting a lot of smoke on startup. As a veteran BMW owner try keeping it on the center stand and see if, when it starts, it's still smokey. If it is, might need some rings.

    • @forthebold
      @forthebold  3 ปีที่แล้ว

      Unfortunately I have found a leak on the right hand side 🙁 I might have to change the gasket on that side.

    • @mohammedkassak9109
      @mohammedkassak9109 3 ปีที่แล้ว

      @@forthebold Im not sure if you have answerd this in a later video but you should never put an old airhead on its side stand for more then a couple minutes, the oil will run over and keep the engine dry on the righthand side. Just for further knowledge :)

  • @odongojr9342
    @odongojr9342 3 ปีที่แล้ว

    New project. Keeping it here👀👀👀

  • @michaelkikon7
    @michaelkikon7 3 ปีที่แล้ว

    This is going to be fun ...
    I don’t know if you know this but there’s a guy I think Japanese who builds these awesome BMW cafe his work is top notch actually both of you are amazing builders ...his channel is 46works I think ...worth checking out ...

    • @forthebold
      @forthebold  3 ปีที่แล้ว

      Thanks I’ll check him out

  • @ianross225
    @ianross225 3 ปีที่แล้ว

    I have an R100T that’s similar to yours but I can’t bring myself to customise. I have rattier bikes hence my R100T is for sale...... Not a classic as such but a nice, period bike that should have more miles ridden in standard trim. Looking forward to seeing the transformation.

    • @forthebold
      @forthebold  3 ปีที่แล้ว

      Thanks, yeah everything will be able to be reverted.

  • @Rob-hx6on
    @Rob-hx6on 3 ปีที่แล้ว

    Can't wait for the C90 project :)

  • @RussellFitness-Trainer
    @RussellFitness-Trainer 3 ปีที่แล้ว

    My favourite channel and my favourite bike 💪😀

    • @forthebold
      @forthebold  ปีที่แล้ว

      Awesome glad to hear

  • @TestTest-pf9qp
    @TestTest-pf9qp 3 ปีที่แล้ว

    One more time !

  • @FunWithAJ
    @FunWithAJ 3 ปีที่แล้ว

    I sense a bigger shop on the way.

    • @forthebold
      @forthebold  3 ปีที่แล้ว

      I wish. I can’t see it happening as it’s all about the location. If I had to travel I wouldn’t be getting much done.

  • @LuchianCiobanu
    @LuchianCiobanu 3 ปีที่แล้ว

    these bike just don t like starting leaned on one side. That s why they come with a center stand. it s because of the carbs. It sounds like it needs some valve clearances but still in good shape.

    • @forthebold
      @forthebold  ปีที่แล้ว

      Definitely needs a good check all round.

  • @wookie5099
    @wookie5099 3 ปีที่แล้ว

    What are your plans for breaks and lines?

    • @forthebold
      @forthebold  3 ปีที่แล้ว

      Possibly keep the original callipers b it replacing the master cylinder that’s under the tank.

  • @douglasjacques40
    @douglasjacques40 3 ปีที่แล้ว

    previous projects still in your shop. Are you a motorcycle hoarder like myself?

    • @forthebold
      @forthebold  3 ปีที่แล้ว +1

      I don’t sell my bikes. They’ll be for my son to do what he wants when he’s older.

    • @douglasjacques40
      @douglasjacques40 3 ปีที่แล้ว

      I’ m doing the same with my bikes for my 2 sons!

  • @adityarai5367
    @adityarai5367 3 ปีที่แล้ว +1

    So is this why you were sleeping in the tent a few days ago? 🤔

    • @forthebold
      @forthebold  3 ปีที่แล้ว +1

      Never in the doghouse :)

  • @nicstead1641
    @nicstead1641 ปีที่แล้ว

    What happened? Watched them all in a row and just stopped on the forks?😢

    • @forthebold
      @forthebold  ปีที่แล้ว

      Coming back soon. Just getting a new workshop

  • @louisrauzi3872
    @louisrauzi3872 5 หลายเดือนก่อน

    Revving the crap out of cold? WTF