xTool D1 10 Watt Laser Assembly and Lightburn Setup
ฝัง
- เผยแพร่เมื่อ 6 ต.ค. 2024
- Game changer and a revolutionary design along with 10 w output power.
Affiliate link to the xTool.com site: store.xtool.co...
Please consider supporting companies that support this channel (affiliate links)
xTool.com site: store.xtool.co...
Easel: www.inventable...
X-Carve: www.inventable...
CNC4Newbie: cnc4newbie.com...
FOXAlien: www.foxalien.c...
Amazon: Genmitsu PROVerXL 4030 amzn.to/3xPdgMP
STARBOND GLUE: www.starbond.com?rfsn=2376834.ca9c16
15% OFF PROMO CODE pawpawsworkshop15
DEWALLIE.COM: dewallie.com?aff=6
Made the Best.com: www.madethebes...?aff=111
=============================
Support my channel on Patreon: / pawpawsworkshop
Direct donations support my channel: www.paypal.me/...
Comments or questions My email is:
PawPawsWorkShop411@gmail.com
Official Website: www.sainsmart....
Link to Laser: jtechphotonics...
CNC4NEWBIE: cnc4newbie.com
Demon Controller By Designs by Phil:
cnc4newbie.com...
_______________________________________________________________________________________________
AMAZON AFFILIATE LINKS:
As an Amazon affiliate I earn from qualifying purchases. Purchases that you make help to support my channel.
Link to My Amazon Affiliate Store:
www.amazon.com...
Frequently needed supplies:
Genmitsu PROVerXL 4030 amzn.to/3xPdgMP
FOXAlien 4040xe link: www.amazon.com...
Replacement brushes for DeWalt 611 Router: amzn.to/2Sknovz
DeWalt 611 Router: amzn.to/2Sp7H6l
90 degree v-bit: amzn.to/2WspRDf
60 degree v-bit: amzn.to/2sYTK0k
Freud bottom cutting bits: amzn.to/2H30R00
Router Bit Set: Router Bit Set 1/4" Shank: amzn.to/2G4iQDH
Oramask 813 12"x10' Roll amzn.to/2VrrUe5
Oramask 813 12"x20' Roll amzn.to/2ViovxQ - แนวปฏิบัติและการใช้ชีวิต
I have an xtool D1 pro and just started using a roller. I have had difficulty finding the receiver for the y-axis until I watched your video....when your mentioned your "fat fingers." I had seen those plugs but didn't pay much attention. After seeing your video, I went out to my workbench...looked more closely at the plugs that were in that skinny corner...and saw the smallest y and x ever. Thank you for your help! My laser is happily working with the roller now. Yay!
Awesome! So glad that I could help you. Thank you so very much for watching and learning.
Thank you sir for a very clear and to the point, no bull, directive video which was the {Very Best} of this type I have ever watched.. Please keep up the good work and I hope others that put out videos of this type can learn to speak clearly and stay on topic as you have done. I thank you again, God Bless!
You’re very welcome. I’m glad that you found this video useful
Thank you! With your help, I was able to put it together and make my first burn in 2 hours total! GREAT tutorial!!
You’re very welcome. I’m so glad that my videos helped you. This makes me happy. Thank you for watching my videos.
Thanks to you Paw Paw, I managed to assemble the D1 frame without a hitch. The belt however gave me fits. It somehow got stuck and I could not get it freed. I turned the laser on its side and gently pulled on the belt and it finally gave. Scared me to death, thought I did some damage. I'm extremely new at this laser thing, so I was super careful. When folks such as myself do not have a clue as to laser, belts and what not, a very close up visual is soooo helpful. Your video got me through this...now I'm on a coffee break. LOL Thank you for taking the time to share your knowledge for dummies like me. Very grateful for your knowledge and patience.
Thank you very much. I enjoy helping others. This is the reason that I started making the videos and created this channel. Congratulations on starting on the path of laser engraving
I just love watching your videos. You are precise, thorough, and to the point. Congratulations.
Thank you very much. I appreciate your support. Thanks for watching
You sir, put this video right where I needed to see it, and very in depth. I don't think the directions are written very well for the construction, and I've seen nothing else showing the ease of setting it up to run on lightburn. Thank you. Maybe we can get Makerbox to link to your video in the instructions setup page.
Thank you very much. May be you can contact them and suggest that to them. If it can help people I’m all for it
I just ordered mine last night …I will be referring this video to set mine up Thank you
Awesome. Congratulations on your purchase
Thank you! This video should be linked on their site.
Thank you very much. Maybe they will read your comment
Xtool should link directly to your video on their site! Fantastic Job!
Thank you, that is completely up to them, thank you very much
Thanks for the great tutorials. You answered all my question. Fantastic!!
Glad to help! Awesome! So glad that this video helped you. Thanks for visiting my channel
This video was very helpful for a novice like me. Keep up the great work sir
You’re very welcome
Thanks for the awesome video. I recently ordered this laser and at the time was unaware of the firmware upgrade. Now I am even more excited as I will be able to learn and utilize Lightburn with this laser
Awesome! I’m so glad that it helped you
Excellent video!! So clear! It would have taken me forever using their instructions. Would love to know what to do with the extra cable dancing around.
Thank you very much
@@PawPawsWorkShop I tagged your video in my video making a project so you can help others assemble it if they purchase one. Thank you.
Thank you for your great Video. Greetings from germany
Thank you so much. Welcome. Thanks for letting me know where are you from. It’s been many years since I visited Germany. Beautiful country
I just ordered mine. Excited to try it out! Thanks for the detailed video. It will be a good addition to my CNC machine!
Awesome, congratulations!
Thank you Paw Paw, I just got mine set up!
Awesome
I too was concerned regarding the cable. But great video, you lay it out in easy to understand terminology in the construction, then again when it comes to the software. Happy new year to you and your family.
I’m going to work on a solution
Great video -- thank you!
My xTool arrives tomorrow and I will assemble and set it up while I rewatch this. Thanks again!
I got mine all assembled and engraved a bass clef into my sample plank. Thanks again -- Subscribed!
I
liked this one best
I used this the territorial that came with xtool and the book at 79 I needed all the help i’m getting ready to
plug it in. then setup new 16:19 computer for use only for x tool. 😊
You did the best tutorial! Good job
Thank you very much. Thanks for watching
Indeed life saver sir.
Glad it helped you. Thanks for watching
Great video and it helped a lot tonight when i was assembling my xtool D1 but i think you missed a step where you have to tighten the one belt. I simply set mine to the same tension as the one thats already done on the machine. Cheers!
Hey Paw Paw! Don’t know if you fixed the issue with the loose cable, but a simple hack is using 2 - “3M Command Light Clips” below the right side track. Just move the laser to the fartest left corner to extent the cable.
Great tutorial ...thanks! I just ordered mine ..can't wait to try it.
Awesome, congratulations on your purchase
Thank you for such a great video
My pleasure. Thank you for watching
Thanks for this detailed video!! Like always very helpful!! this is one of the systems that I've been looking at but I'm still not exactly sure what im going to end up purchasing. Now that they can use the light burn program I think its a good option for a first time laser owner.
You’re very welcome
I thank you!
You're welcome! Thanks for watching
Thanks this was a big help
My pleasure. It’s a great machine. Thank you for watching
Great video Paw Paw! I’m looking for a hobby that my wife might be interested in and this might be the ticket.
Excellent choice. Thanks for watching
*Excellent build video Paw Paw!* It's a well built laser for sure, but I think it was launched a little too soon. I have had several people tell me they have had problems with it loosing loosing the home position, and the lack of limit switches compounds that problem. Also, moving the gantry by hand can throw off the square. Nicely built, some great new features, but not ready for prime time IMO. Just like most diode lasers.
Thank you very much. I actually don’t mind not have the limit switches. The laser box basic is a little too basic. I like the fact that they finally added the ability to use Lightburn. Thank you very much for watching. By the way, your channel is growing fast.
@@PawPawsWorkShop Yes, faster than I ever imagined! I'm going to email you next week when I'm over the whole Covid thing with an idea....
I love my D1. I’ve had zero issues with it. Just ordered the new upgraded rotary and can’t wait to for it to ship the end of the month.
Thanks you sir
You’re very welcome
Your video was the most informative on the D1 I could find. Thank you! I just unboxed mine and I have an extra prong on the cable going to the laser does it go on the black box? You did not cover where that goes....or maybe the model has since changed. The manual is only pictures and not very good ones either. lol.
First, thank you very much. For your question, I’m not sure, I did not have that. I only had one connector for the laser. If this connector was located near the middle of the cable then that one goes to the stepper motor
I like your video and I do have questions? Have tried to engrave pens with this unit
Thank you for watching, yes, I have done multiple videos engraving pens.
Looking well
Thank you
Happy New Year and God Belas
Thank you so much. Happy New Year to you and your family.
@@PawPawsWorkShop Terima kasih TUHAN YESUS Memberkati Amin
sir I got mine together bought computer refurbished got it together no Manuel and half power cord missing sending me another i’m wondering if i can temporarily use my tablet. Got mine together mostly from your territorial. thank you sir so much. 79 I needed all the help
Wow, I’m sorry for all the problems that you’ve had. I do not think the tablet will work
Because you are so detailed in your instructions, I was wondering if you would do a video on how to adjust the belts to know you have the correct tension on the belts. So far I haven't been able to get it right. My lines on the star and heart are off, tried to engrave letters and they are crooked. Any help you can give would be very much appreciated. Thank you.
nice design!
Thank you
Man, I wish there were limit switches on this thing. I've rammed it into the frame on several occasions...I've had the hardest time figuring out the Absolute, Current Position, User defined poisitions.
There is a new version with limit switches coming out July 6th
This was great. Thanks! I noticed the Masonic logo- traveling man?
I made them for a person.
Simple fix .loop the cable over the top of the bar not under.
Yep, that’s a possibility. Thanks
Hello Paw Paw! First of all, thank you for sharing your video. I have a question: Is it possible to use xTool D1 Pro with LightBurn via WiFi?
Thank you, the xTool will work with Lightburn as that is all I use in the shop at this time. I know it is capable of WiFi but I do not use it in the shop. In my shop it is inconsistent and I’m not interested in ruining a project.
@@PawPawsWorkShop Thank you for the answer.
Ran into your video while searching Thanks for the help. One thing I have not seen watching any of these videos is setting the tension on your drive belts. what are your thoughts on this. It seems to be very subjective.
Thank you for watching my video. In many of the videos I show how to tension the belts. On these simple diode lasers all you need to do is to tip up the laser and let the gantry slide down. It should move slowly down. If it does not move, belts too tight. If it just falls, belts too loose. The laser should be tilted to about 45 degrees
@@PawPawsWorkShop That my friend is good advice. Appreciate your time and your quick response......have a great day. Just hit the subscribe button......
Thanks for the video. I got Everything set up but for some reason I'm unable to home or remove the machine from lightburn? Any suggestion.
Move the machine
Thank you for watching. I have never homed the D1. Use current position, frame,(just to make sure all fits), engrave. Go to devices under laser to select another laser
Great video I enjoy your product reviews. I would love to see laser demo in sainsmart prover xl 4030. Maybe sainsmart can send you one to do a demo of setup and operation. :)
Thank you very much
very clear video my question is, I have the xtool pro d1 5w and I cant find any videos for that, only for the 10w and 20w. Can I use this software or do i need to use the xcs sfotware?
Yes you can use the Lightburn software
hi and thanks for the video, can you control light burn and engrave via wi fi or only laser box works with wi fi?
I have not looked at the Wi-Fi process yet
Thanks for doing this video, I followed your step by step set up and got it all set up however I am stuck when it comes to Lightburn. You say to click on devices, however I can't do that because the window pops up to find my laser, I try to import and it's not found in my downloads even though I just downloaded it. I have spent 2-3 hours trying to figure this out 😞
When you click on devices, create the laser manually. Also, in the D1 info it tells you step by step how to add the Lightburn software and how to setup the machine in Lightburn.
Thank you for your video. I have a question which related to the alignment. So I try to print some text to the metal card and the problem that I'm facing now is how I align text to that metal card. All my text just not align to the edge of the card :(, so it is like 3, 5 degrees from the edge :( Just hope you have the solution for it. Thank you again.
Great vid. How many lasers do you need.
Just enough to answer all the questions that people ask on the various machines.
hey Paw Paw
Would it be possible to add this to my Laguna iQ with vectric to make projects more detailed. You might want to make tutorial Yes....No? I think you could do this cause your ''the man''. Give it a shot.
Not sure, not familiar with that CNC machine
Good video - I used it before assembling my new D1. Question - Using lightburn, my crosshairs outline the project to the left of the actual burn area. Is there a way to align the crosshairs to frame the actual burn area?
Your crosshairs are offset by design 16mm. It should frame correctly unless you have changes some settings
@@PawPawsWorkShop 16mm sounds exactly the amount they are left. I'll do some more digging into why.
When standing looking over the d1 frame the little switch should be in what position when running normal, towards the power button or to the tumbler outlet?
I conducted every step down to the Letter T. And my light burn setup looks different than his. So I was wondering if I could do anything or should I just reinstall?
Living in the deep south myself do you keep your laser engraver in you shop and is it air conditioned? If not A/C would any harm come to the engraver? Thanks
The shop is air conditioned when I am in the shop. I turn off the A/C when not in the shop. So far I have never had a problem with any of the machines due to heat and humidity
@@PawPawsWorkShop thanks for your response
Great videos for a longtime subscriber. Do you recommend learning on the laser box software or just jump into learning lightburn? I’m a newbie to this process.
I would just jump into Lightburn. It can do so much more.
@@PawPawsWorkShop What laptop specs would you recommend for Lightburn. Also, have you ever used a wireless setup?
You have tested several laser units over the last year or so. Your opinion, which one would you pick as a permanent fixture for your shop?
My favorite is the FOXAlien and the xTool D1. I can’t wait to use the new 40 watt laser on the FOXAlien
This video is amazing! Everything was pretty easy to follow. However, like most people, I'm having an issue with the laser not engraving/cutting. I can see it framing the motion that it's supposed to but when I press start in lightburn and XCS, the blue never shows up and the red laser just moves the way it's supposed to. I tried customer service but they haven't responded yet. Please help, thanks!
Hello! I am having issues with my Xtool D1 Pro Laser. I received it and tried it, the first try was perfect. Then the second time I tried it wouldn't work. The laser would move around but the laser light barely had any strength. It would move around as if it was doing the job and would take the amount of time the project would take, however there were no marks on the plywood or anything and the light was very very weak. You could barely see. I emailed customer service and it has now been a 3 month battle or recommendations and changes they want me to make which I have but nothing has solved the issue. I went ahead and tried another laser head which is the one for metals. I did 1 dog tag that came out beautiful. I went ahead and tried to do another dog tag....same thing happened....the light was too weak barely visible, the laser would move around as if it was doing de project but nothing would engrave. I didn't change anything on the setting from first project to second. I was working with pre-establish material settings. Power speed and all was verified and still nothing. Do you have any idea what it could be or how to fix it?
That does seem odd to only have made one engraving. Are you using air assist? Have you looked at the lens to see if it is dirty? If all that is ok, I would next look for loose connections to the laser to the control board. Then, there is a possibility of a bad control board
@@PawPawsWorkShop Yes I looked into all of it. I even put it apart and built it again from scratch...I have cleaned the lens and done everything from disconnecting every cable and connecting again
Great video! I noticed a square and compass in the art library, perhaps you are a traveling man?
Thank you very much
Happy New Year PawPaw!!!!
Great Video and as usual, a lot of really good information. You said you didn't like the cable location. Viewing the video, it seems that the cable should be able to run ABOVE the maker slide.And then secure with cable ties. Am I missing something that would not permit that kind of config to be used. It seems that it would eliminate your concern about the cable moving into the work area and possibly being cut during an operation.
What is the Z axis height specs?
Thank you very much. I’m definitely going to find a different way to solve this cable problem. To risky to have it get in the way of the project
@@PawPawsWorkShop Good afternoon PawPaw. Since I am awaiting delivery of my xTool D1, I am curious as to how you resolved the loose cable issue you mentioned above. Additional wire ties?
Regards,'
Dave
As far as the cable that's in the work area, can't you route the cable over the top of the laser bar instead of under it and zip tie it to the holes on the right side?
Alan
Coming across the top does not work well. I’ve got several ideas that I am testing. I’ll share the one that works best
Which laser is the Best Buy the 14 watt adaptable to x carve or the D1
Sir in your opinion which laser is the Best Buy the 14 watt aptabtable
Which laser machine is better in your opinion, the xtool d1 10 watt laser or the foxalien 20 watt riezer laser?
That’s a tough question. I just started with the xTool and have found that both are excellent. The xTool is an excellent designed and very precise. The FOXAlien is built like any others. Both have compression laser beams
Can u use Vectric software to run on d1 pro. I am thinking all u needis a post processor
Thanks for the video. How do you compare the Foxalien vs the Xtool? what is better? what are the differences?
Is there a way to save presets (speed, % etc) for future work? Thanks
Yes, use the library tool in Lightburn
@@PawPawsWorkShop Thank you
store.xtool.com/?ref=Z7HBgvK54DJ0sU an affiliate link to shop for the xTool
It sounds Impressive if it can nearly cut through 3mm ply in 1 pass!
The machine looks good, simple, clean design. I agree the loose cabling will be a problem. I assumed during installation that the flat ribbon cable would have acted like a drag chain. But effectively it needs cable tie almost up to half way on both X & Y. And flat ribbon will say aligned straight.
Neat flip out measure tool, but you didn't say how to adjust. I assume a lock nut on the sliding dovetail??
Who makes/sells it?have you posted the supplier web site?
To adjust the z axis just unscrew the lock screw drop the laser down to the gauge and tighten it back up. Slap the gauge back home.
HI, PawPaw...I need a little help. I'm new to anything laser, so please bear with me. I've had my machine xtool d1 for serveral months, and because just recently I managed to figure out why my Laser head kept crashing and believe me if you see the head on the left side of that laser you would cringe. I have thirteen hits on that and it is marked for proof. Well, I also have a camera set up and was trying to figure why the alignment is ALWAYS off.....conclusion, the laser hit the rails so many times that the Gantry is now out of alignment. What I'm confused about now is how to square up the Gantry. It is off by a 5 to 6 mm on the Left side (looking at it from the front of the machine) and I'm not sure what screws I need to loosen or tighten to square it up. I've followed you on the set up (thank you for that) and all was well for me. Except for the crashes that threw it all off. Your answer, Paw Paw will help a whole bunch of D1 users out there that use LightBurn and have the same issues as I have. Just as a side note: LightBurn is a not a bad software...but Jason is trying to serve all LASERS and CO2's; and newbie's such as myself are not putting in the correct figures in for the D1, so no one wants to use it. Sorry, this is turned into a book...but you explain things so well....
Wow, that is a lot to be out of square. It seems to be all on one point. If you recall when you assembled the machine the screws that attached the y axis rail to the x axis rail on the back of the machine. You may have damaged to screw hole or maybe even broken it. You will need to loosen that area first to see the internal damage. The machine was designed to go together square. This damage has caused it to be that far out may result in having to replace parts. When you take apart the corner and see the damage please let me know and I’ll try to give solutions to repair it
@@PawPawsWorkShop Paw Paw, I have figured out that after 8 hours of rebuilding the Xtool D1, and reinstalling the software, (even taken the time to go through the registry on Windows 10, to make sure ALL of the software was gone) that LightBurn kept reading the measurements of the bed bigger than it was, and for some reason it did seem to think that what measurement was in for a cut or burn was wrong and did its own thing. Why so many crashes. Well, the machine is not damaged (that was really scaring me to death, I've lot invested in that unit) and I've squared it up and double checked. I ran a small test burn today, coaster with a graphic in the center, and it framed it NORMAL, and engraved it perfectly. One thing that occurred to me was when I first loaded the software , I did not have my virus software turned on...this is usual however with a lot programs so after the installs I always turn it back on. Well, this time I left my virus software running as usual, and there was no issue. It is quite possible that a virus attached itself to the software and caused it to act wonky, it is of course my opinion. I watched your assembly video on the D1 and assembled exactly and now it's burned into memory.
Do I need the computer to setup the mobile app?
By material? Thanks again
You’re very welcome
@@PawPawsWorkShop Is there a hand tool for moving the design around?
Hi was wondering how do we put our own designs in
Draw you design, prefer to be black and white. Take a good quality photo and upload it into Inkscape. You can create the file that you need from there. I have shown videos on this process.
Is it necessary to vent this machine?
Anytime you are burning anything that causes fumes you should ventilate.
My question, what is the handle on the front plate used for the one that hangs down?
Here is a link to xTool.com. store.xtool.com/?ref=Z7HBgvK54DJ0sU
If you get a chance could you please explain what you meant by the 32 = one my laser still is not working it is framing it is moving in the directions it's supposed to but it is not engraving nothing is there something I am doing wrong please help thank you in advance
Do you know how to get to the GRBL settings? What software are you using?
@@PawPawsWorkShop im using the latest windows. i dont know how to find my GRBL settings. my laser frames and moves it just dont engrave. sorry for being a pain.
@@PawPawsWorkShop also just trying to use laser box basic
I don’t use laser box. I’ll look to see how to see the GRBL settings. Also, I assume you completely followed the xTool setup including updating the firmware as necessary
Yes I follow the directions precisely did farmware updates did latest software updates everything I haven't actually tried to use light burn yet although I have it downloaded perhaps I will try that but I still think it should work with laser Box basic no?
When I use xtool with lightburn, my image is engrave upside down and backwards. It look like the mirror of what I want
Just use the mirror icon at the top of the tool bar
If I hit the mirror icon, then the one on my computer screen is mirrored, is that normal. And it is also upside down.
Yes
Is it your experience that laser watts are a standard measurement across brands? In other words - can I assume that my 7.5 Watt JTech laser is less powerful than this 10 Watt laser? It may sound like a dumb question, but how do I separate marketing from facts?
No, there is not a really good standard and I don’t have a way to accurately measure the output.
@@PawPawsWorkShop Thank you - I've learned a lot from your video's - thank for making content for us.
Can this laser do 3d engraving using grayscale image depth map?
Yes, there no reason why not, it’s really all about the software
My laser has been acting weird. Weaker, wont fully cut through anymore. Settings are the same as they always have been and it was doing everything perfectly before. Engraving with great detail and cutting through 5mm birch in 1 pass… I have to complete 75 wedding invitations, after 24 its acting up.
Two things to consider. One you may need to clean the lens on the laser. Use alcohol wipe. The second factor is the laser head is considered disposable. At full power the diode laser will last about 1000 hours. With let power it will last longer
@@PawPawsWorkShop wow… thanks didn’t know about the use of the laser information. Im going to try cleaning the lens when I get home and see it that works out. Thank you.
Hopefully purchasing a new laser head is simple if thats necessary… trying to get in touch with the xtool team definitely isn’t simple 🤦🏾♂️
They have had a number of COVID lockdowns
Why is it so hard for me to find out what the button on to is for and also the huge toggle lever under the button???? Some one please tell me where to find this information???
Hello, a friend of mine sold me his Xtool d1 pro 10 watt, but could not find the power supply, tried contacting xtool but they would not tell me the spec.s and want be to go though a bunch of sketchy steps to buy it doing screen shots to a third party and the give the a screen shot showing it paid, not to mention they wanted $80.00 for it. All that being said, the laser head says 12vdc input, but the machine where you actually plug the machine in to says 24vdc, anyone give me a picture of the specs on the back of their power supply?
What app do I use. I cannot find one in the app store.
Go back on line and pull up the User Manual for the xTool. You will find everything there. You will need Laser Box Software provided. I prefer to use Lightburn. All the information is there.
Thank you, we will try.
hello there. i got the machine couple of weeks ago. i got it to work barely (one time to see how it work) and now it doesn't work at all. when i press frame the laser head is moving but with no laser point. something happened to the machine and i can't figure it out, if anyone knows why that is happening ill be very happy. thanks a lot
hi, did you get this figured out? I'm having the same issue right now!
And you can use the focus arm as a bottle opener. Lol
Let’s hope I don’t get that desperate. Lol
Paw, paw...can you please help me?? Customer service is giving me the email runaround. I follow all the instructions and attempt to frame. Nothing happens. I click process and get a mressage the project is "complete" even though the laser has not moved. I dont know what I am doing wrong. It looks so easy, but I cant get this STUPID MACHINE TO WORK!!!!!!!!!!!!!!!!!!!! I am ready to take a hammer to it!
Are you using Lightburn or laser GRBL?
In the instructions there are drivers. Did you add the drivers? Does the machine power on at all?
Using XCS. Powers on. I see the red x but machine does not reply to any commands. Lightburn is too complex for me right now
Great job with this . Please Please Please stop saying "GO AHEAD" You do not have to say it! Thanks
Noted. Thanks
Glue gun for wire harness:
th-cam.com/video/dOi_q4SfYHk/w-d-xo.html
Good idea. Much better than drilling holes in the frame. That was not an option
you take a bunch of time showing how to install screws, but when you get to importing to lightburn, you take off like a rabbit.
Installing Lightburn is very easy and straight forward. Do you have a specific question?
@@PawPawsWorkShop yes, I’ve set up my unit. It is moving around just great. I can’t get the laser to fire. Now to my comment. I love you videos, but you pointed out several times how well engineered the product was, and how easily it was to put together, then it is off to the races. I don’t know if you discussed firmware update and switch positions at all.