283hp Civic Explained - Eddy's N/A 8 Gen Si Race Car
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- Performance Mods
Drag Cartel 2.2 Camshafts
Super tech valvesprings
Hybrid racing cold air intake
Hondata manifold gasket
Honda J35 Throttlebody
Ktune Header with HFC
Full race 3 inch exhaust
Honda K20A2 Type R oil pump
Competition clutch stage 1.5 clutch with lightweight flywheel
Hybrid racing clutch master cylinder
Corsport USA shifter bushings , base bushings
Custom tune using hondata flash pro from brentuning
Handling upgrades
Koni Yellow Struts with neuspeed sport springs developed by Redshift motorsports
Skunk2 Camber arms
Progress technologies rear sway bar
Energy suspensions poly urethane bushings for control arms and suspension components
Meagen racing chassis braces front and rear
NRG strut tower brace
Corsport USA inner chassis brace
Stoptech stainless brake lines
Stoptech slotted brake rotors
Hawk HP plus brake pads
Enkei RPF1s with Bridgestone RE71Rs
Subscribe to the channel!
Instagram: Tedward_ig
Snapchat: tedcol
Tedward Drive Tribe:
www.drivetribe...
283 hp with DC's drop in cams lol that's a very generous dyno brotha. On stock block & compression.. Cmon saaaan. Clean car though man.
HADDOCKRACING just watched this video lol. He won’t get those numbers without a k24 block. But it’s a nice car for sure. I had a k24/k20 that made 279whp
DJ Roderick what do you have done to yours for those numbers
Justin Tracy k24/k20. 87.5 bore. Built head. Stage 2 skunk2 cams. Vtc cam gear. 50 degrees. Type s oil pump. 600cc injectors
Agreed, you can't achieve that without bigger injectors anyways. At the very least!!!
Wow he running around the same horsepower I am and I am running a Frankenstein motor and he doin it with a 2.0 with no turbo or anything and he is putting my set up to shame ):
Since we are throwing bullshit numbers i made 450whp on stock turbo FBO on 91😂
I'm certainly no master mechanic but I do question the validity of these numbers with the parts listed... I have a bone stock k20z3 with full bolt ons with a pro tune that makes 230whp & 165wtq in a 2011 FA5... his car revs similar to mine to redline... only difference is, I am catless and this build lists a HFC
My build also has the HR CAI, J35 with ported RBC, Alpha header and Full Race 3" catback, again I'm running catless
I don't think the 283 is whp... I'd also like to see a full dyno run and the immediate end result in whp
been researching this car since I am looking to buy one with the K20z3, and I have seen the same NA without any ITBs and all that crazy stuff. 230 seems to be the limit before you start spending thousands for small gains. I always time mph. I know my car can do 40-100mph in about 6 1/2 seconds, then I look at other similar cars and see how they do. Gives me a general idea where my car sits. Im sure if you replicate their pulls and time them you can see how much off their claims are.
John Dough Exactly what I was thinking. Maybe if he had a head job done with angles, etc. Plus stock pistons and non ported rbc. Certainly sketchy to say those are whp numbers.
John Dough upgraded valve train and cams on e85 goes a long way buddy. My rsx makes 278/186tq k20a2 stock bottom end
@@kuya_mike7813 He said he was on 93 pump gas lol. He made more then your e85 tune on pump with less. I don't believe it. And he said he was on a mustang dyno. Usually they read low (heartbreaker)
K24 bottom end
Dyno numbers mean nothing really , go run the car in the 1/4 mile and see what it traps. That's the only thing that will tell the true power. If it's really 280+ whp it should be a 106-108 mph car. It definitely did not pull like one in the beginning of the video
NAUS You’re wrong. Drag racing takes weight traction and driver skill into consideration
@@deek1701 what? please explain to me how the 1/4 trap speed is not the real test of power?
Actually a all motor setup making 280whp should be trapping close to 115-120 depending on how light the chassis is and driver skill, tires, etc...
...how high does it rev, because i've never burned through and exhaust gasket and I rev over 9k with mine. My friend's built K crx also revs to 10,500 and doesn't burn through gaskets.
Childstar he had to take a look at his “list”
He either made all this shit up lol or he bought it with this shit and this is what he was told. 300hp IS ALOT of power lol in a light car the power to weight ratio is crazy. I’m just not buying it. If u build a car you fucking know what’s in it man. I can rattle off my last 4 Honda’s and every single part they have and had. Just not buying it man. He had to if bought it or he smokes way much bud
Doug S
I don't buy it either, no way those cams and his big tube header made another 40-50whp, my setup is identical minus the HFC and I have a stock k20z3, mine made 230whp
@@johndough27 he has the k24 bottom end though that where the extra 40 comes from, the extra 400 cc's of displacement
@@kylefuchser5667
He said it's a stock bottom-end, never says k24 bottom-end... the listing on this vid says nothing about a k20/k24... and you're saying the k24 makes 40 more hp than the k20? From what I remember the k24 makes 200-205bhp stock...
@@kylefuchser5667
Either way, no one is making 283whp on stock pistons and a stock fuel setup... k20 or k24 bottom-end unless boosted... and then even still stock fuel setup won't get you there
Opening clip: took 12 seconds to go from 44mph to 95mph. LMFAOOOOOO
Already forgot a few things 😂
Hybrid Racing clutch master cylinder
Hondata Intake manifold gasket
Walboro 255 fuel pump
Skunk2 rear adjustable camber arms
Also if you ever need any sort of OEM or performance parts for Honda’s I highly recommend AFHK parts, me and Tom actually visited them in an earlier video awhile back. Awesome guys and Colin is the man!
Colin RULES! those guys know every detail of the parts they sell.
will these parts fit on my Audi?
yes...Honda and Audi are 100% interchangeable
No way in hell that thing is making 280whp
i agree
Steven Narvali truth hurts doesn't
Steven Narvali why not?
I sense someone who is mad!
Maybe because it had like 280whp and like 130 ftlb of torque
This has to be a troll. My old Full bolt on, injectors, dw300 fp, 12.5 comp and bore k24/k20 makes 270 whp on punp gas with a vittune.
If this is a 2.0 these numbers are IMPOSSIBLE…
Haha bs! I'm calling 240 max! Doesn't accelerate like a 300hp civic
i agree
Should’ve never showed him racing the train
My 08 RDX has 220awhp and 250tq and it’s faster
I guess is about 220 HP at the flywheels for stock engine even with CAMs. Probably around 160 KW at wheel max. Nothing really crazy unless the Dyno he used was reading high lol.
bro acceleration in the low end like that is gonna be from torque so ya it could be 270 to the wheels but probably only 130 torque
Thats the slowest 280hp car i have seen maybe 230 to 240. Who ever calibrated dyno did something wrong
i have a friend who had H22 (prelude 5G) doing about 280 HP NA (on crank). And his engine was heavily modified to do that. It was very expensive, pretty much everything inside was changed (coz of high compression ratio), but the crankshaft (only one thing kept stock).
I cannot believe this K20 engine has 300 WHP just by cams.
Ohhh, I get it. This is comedy.
Definitely a fast car whether that HP estimation is accurate or not
people are all freaking out about the HP...It was dyno'ed and it was shown lol. No one is complaining about the baseline, but everyone is complaining about the numbers after the mods. I've even gotten comments from folks saying the dynograph showed less than 220hp, meaning that they do not even know how to read the graph. The sad part is that this car ended up hydrolocking in a huge rain storm and it is dead. Now he has built a new Civic Type R for the track. thing is a beast. Thanks for watching and being a reasonable human being in the comments =)
I have a 2006 Honda Civic si coupe with a K24-A2 bottom and K20 on top all out built and scary fast rev limiter 9 RPM.
How much HP does it makes
This guy is a straight bluff that car doesn't pull like a 300 horsepower civic
Chris at redshift is deff a Honda guru and always willing to help out with advice! Bought my Koni strs oranges 🍊 kept stock springs with new strut hardware
lol looking back at this. All it had was dc 2.2 cams and fbo
This man's making 280hp to the flywheel 🤦
i cant believe that either... see my comment.
What fuel was used on this car? The dyno plot shows 190+tq, which means you're using M5 with additives, or the claims are completely inconclusive. What does the car trap in the 1/4?
It looks like a 100 trap car. Like an even 100.
93 Octane my friend no race fuel or additives its setup for road courses so i am not really sure how it would do in the 1/4
@Sergio Aguirre I totally agree that homeboy is a noob but this is my take about trap speed and quarter mile times I for example have a 10th gen civic si with just a downpipe on it on stock ecu and I did a 9.4 with a high 2.3 almost 2.4 with the stock tires of course my buddy has a fg2 si with fbo and flashpro tuned and he did a 9.4 with a 2.2 at 79mph mine was at 77mph almost 78mph so yea when you spin alot and 60ft is shitty mph will be higher but once you start to grip and 60 ft goes down mph will go down a bit ut time will be better
This can’t be factual... doesn’t add up at all
What injectors are helping you put down 40 more hp than everyone else with the same mods?
Geoffrey Hinchcliffe haha I’d like to know as well.
*People think there ricers so therefore no one will that 300whp seriously.... I believe you..*
Skate Club please learn how to write a complete sentence properly before posting nonsense.
C. Marquez stfu
C. Marquez Another One
The clutch on those cars stock aren’t heavy at all unless they’ve changed the 8th and 9th gen clutches
1:16 The graph clearly shows peak power in the 220’s lol
The pull in blue shows power above 279 and torque above 189.
@@TedwardDrives Not to be rude or anything, but the blue line says "Engine Torque" and the Red line says "Engine Power".
Red and Blue are the key for the Y axis (since both torque and horsepower are represented on the dynograph) . There are three pulls shown on this graph. Each pull has its own color and represents torque and power with the same color. The two red lines are the baseline of torque and power. The Green lines are the first pull on the new setup. The Blue Lines are the final pull.
@@TedwardDrives no the blue lines are clearly torque. These numbers are absurdly high for what mods this car has. Stock compression N/A K20 without a ported head are not making 279whp, probably doesn't even make 279bhp. This thing is on stock injectors as well, I was at 93% duty on my fbo K20 on stock cams. It made 220whp. You're telling me he made 59whp more than me with drop in cams and stock injectors? Without hitting 100% duty and leaning out? Yeah right.
A dyno is a tool for tuning, you do a base line to see what it does and then improve. It's not meant for precise hp measurements, every dyno reads differently. So show us sheets all you want it doesn't mean anything. Show us the 1/4 mile trap speed. I'll be impressed if it breaks 100mph lol
Finally get to see Tedwards face! 😂
Googled "sleeper" and found this video
LOL
I would not call this a sleeper
E SEAGULL Do you have more and better pictures of it somewhere?
Indeed
Let me know if you want them i can send them
My base rsx would smoke that
🤣
Your making 240 max with those cams let alone on a stock block. 283 would only be achievable if you hade some more aggressive cams along with piston and rods and e85 lol. Now if you where to go k24 with a built head then yea I could see you making those numbers on a stock bottom end.
Or a jrsc/ctsc Otherwise those #s are BS especially with the stock block.
4bangerECO they’re not bs. Quit being mad
The drag cartel cams really adds that much, Mine basically stock k20z3 hondata and bolt ons maybe 220hp. Frankenstein with drag cartel yes then you could
This is pure badassness yo
Real mature doing a pull while not wearing a seat belt.
Has harness on driver side so the regular belt wasnt plugged in
275 to the crank
No where NEAR 300whp lol, if you've seen any videos of 300whp k20s you know is FAR from it. My 8th gen Is FBO hybrid CAI, s2 header, full race exhaust, j35 tb around 230whp it pulls just as hard IF not harder... also my injectors are at 94% duty lol and I didn't hear "injectors" on that list. I CALL BS...
Numbers do sound weird. My boy has a K24a2 built from the valve cover to the oil pan 3 bills to the wheel. So you have spring retainers an FBO? If it is that high that's a good thing so high people don't believe you haha nice car
Tedward well eddy got a real nice car you would not think by looking at it that it has a mean fast engine! Sounds like he put a lot of money! Plus the tickets and the tires ! Tedward u got a lot of bad ass friend s lol take care !
Life's too short for boring friends!
Where's the part for the k24 bottom end?
Ikr all these bumb ass k20's. k24 is the cream of the crop now k20 is almost useless for a highly built k series now.
All these numbers and parts being talked around yet no pull to proof it? The pull in the beginning looked like this thing was stock lol
So many people say yellow fog lights, but never specify. Are they bulbs, or whole new assemblies?
His are bulbs.
Get lamin x you can get waterever color and its about $20
clean setup, hawk pads are the way to go?
there not bad they sadly don't last that long...
E SEAGULL 🧐😒
why 2.2 and not the 3.2? im running stock comprssion k20/24 build. howver i was recommended 3.2 regardless because i have a ported head and intake mani. any input on that?
3.2 ‘s are the go to , even with stock compression they make jam
yeah but its....its....CLEAN! i like it
Why thank you!
You gonna drive it bro?
that some BS numbers. That dyno is reading high or its bhp. You WONT make even CLOSE to 300 whp on a k20a2/z3 with just DC 2.2 on stock bottom end and stock compression lmfao. You need a built k24/k20 swap motor with higher compression and some stage 3 or 4 cams to reach those numbers. Don't claim bullshit numbers, you're just diminishing the efforts of people who ACTUALLY have 300 whp k series!
😂
at 283hp arent you taxing the stock injectors? didnt see that on the mod list.
Got em
you hve strut bar and left the big metal cowl on ??? ditch it
so many nice cars yet haven seen one make numbers or beat anyone, we need to fix this, by the way great build Eddy
Haven't seen eddy's cars beat anyone? That camaro has some kills under its belt =p
im not saying eddy, in general in mass, its sad to see people claiming power out of X tuner then looking at slow trap speed or even loosing in mexico. i like eddys cars, he is very knowledgeable but as soon as i see who tuned makes me question is the car fast at all
Car is slow Jairo its all BS
Me and my friend's cammed 8thgen makes 220whp on a
Honda can’t sell engines like this anymore because of emissions… yet half the cars on the road are giant SUVs and trucks using more fuel than these did 🤡
"compared to my type r" no effort saying that at all lol
I/h/e/kpro gives k20a2's 200-220 whp dependant on good brands upgrage IM/Throttle body alone won't do much 5 whp maybe but with cams, valves, valve spring and retainers depending on the brand you will make 240-280whp with a good tune and supporting mods like fuel pump and injectors BC or Brian Cowers for those who don't know BC stage2 Cams will make 240 ish all day with good tune but drag cartel like you have or blue prints which both are easily 2x the cost of BC I'v seen make 280 whp on pump gas so for all the haters out there with modes he has list 270-275 is believable!
How much pistons CR? How much VTC maximum limit in this camshafts?
Why don’t anyone use freakin the skunk 2 downfacing intake manifolds with fully built motor 300 to the wheels
Burning up exhaust gaskets lol what about your intake welds?
Danger to manifold
Never trust a guy that to tell you what´s in his car has to check his phone!.. he has no clue what he´s running!
It's hard to believe I mean I have k20a with big tube header and 3 inch exhaust 3 inch short ram intake 72mm throttle body and Dyno 234whp in 40 degree weather and in order to make the power he says he makes he would need a k24 block with at least 12.5.1 compression
Car is long since dead, but we went by the dyno numbers. You could be right, but contrary to the angry comments, we aren't trying to snake anyone lol. Just built a car... tested it...reported the figures. Hope your car smokes the competition!
NOTHING LIKE ALL MOTOR POWER
My Si has the VSA light constantly on like Eddies.. did he ever figure out why it does that and how he could fix it?
Mine is disabled so i do not forget to shut it off at the track ...
all this car needs is a turbo now
It drank some water on a flooded road and hydro locked :(
For you j35 tb did u portmatch the intake manifold?
I don’t wanna be a hater but night videos have not the same quality than a day video
Yeah I tend to agree. It’s funny because a lot of folks go nuts for night videos, especially POV (like the rwd converted r8 manual). But most of what I do is shot in the daytime. Also this video is pretty old so I’d like to think they’ve gotten better since this
283 on nitromethane. Not on pump gas.
Nope! I'm right above you in New Hampshire whenever you want to hit 93 let's do it!
Car hydro locked and died like 2 years ago. You can run his type R on the track tho!
@@TedwardDrives let's do it I'm down for a race I most likely won't win just to see it pull.... after that we'll race one end of the kangamangus to the other
Did you change the front sway bar endlinks?if so, what brand?
that setup has 250-260hp not WHP on pump fuel. To go over that mark you need high compression bottom end and a cnc ported head. Americans and their numbers lol
That’s crazy. That much power with no porting of head? Nice build though
Nope Stock head !
Are you on stock injectors?
Wait, this is the guy who reviews cars on Winding Road Magazine channel on TH-cam?
yessir! but shhhhh its a secret
🤔 sleeper?
How is the mileage?
Bro your Si not 283 hp lmfao the speedo during pulls gave you away man
Yo question can the mods be used for a Dailey si
crank hp or wheel hp?
and what is he talking about it's not easy to make 300whp in a k20? it's actually really easy to make that...
ackchyually
I bought my civic not to long ago and it looks stock other than the carbon fiber engine covers loll. But its fucking fast and has a really loud vtec crack. But idk if its just from the tune or running internals like yours. I was laughing thinking it was a sleeper. Would be dope. Has launch control. I havent dynoed it or looked inside so i have no idea. I dont think 8th gens are that fast stock? It also has a deep suddle exhaust tone. Which i don't think is stock. Ive also hit 117 on the highway easily. Wanting to build it and get 250-300 hp but i know nothing about tuning. I had a lot of people at the street races ask me what ive done to it .
Do you think its got something in it? Or does that sound like a stock fa5?
mine is just tuned and intake and pretty quick about 205 horsepower with loud asf vtec
How many cars does eddy have? 🙇🏻
+Dakota Schaeffer currently at 4. Was almost 5 but he traded the ats when he got the type R
too many... they all broken
I hear the microwave, put your seatbelt on lmfao
Why does exhaust size matter can I ask
Depends if you’re running n/a or forced induction.
93 or e85??
93 for now
Tedward wow that's pretty impressive power for 93
Is this in SF?
Boston
Love his build, but he's kind of a weird kid lol.
That's why we love him
i wish we could race 🥺
Same. This engine drank some water in a storm and is long since dead
283 on a dynpack????
He’s so cap those motors at not pushing 260 plus with just those mods and stock injectors yeah your big cap fam
the dyno sheet he showed in the video said 220hp 195 torque
Nice
Look up Gene Kim n Robert breaker on TH-cam
On what octane are you making this power?
Donald Geter Jr He said 93 octane
Gianni Adduci thats one happy ass dyno
I know that no ABS life
🧢
Bullshit.......280 crank maybe..........240whp.
Lmaoooooo. Yeah bullshit numbers
Still slow too heavy