The Rode PSA1+ Is (Almost) The Perfect Mic Boom Arm
ฝัง
- เผยแพร่เมื่อ 19 มิ.ย. 2024
- Since 2003 the Rode PSA1 has been an iconic and ultra reliable choice for a mic boom arm, but now there's a new boom in the room: the PSA1+. Let's see how the two arms compare and whether or not the new version is worth the extra money.
This video is not sponsored, but Rode did send me the PSA1+ as a gift at no cost. I'm not obligated to make a video about it or say anything specific about it, and no one gets to see this video before I publish it.
If you've got questions about that, check out my Ethics Statement about objective reviews, sponsored content, and brand partnerships:
himynameistom.com/ethics
• Rode PSA1 +
geni.us/psa1plus (Sweetwater)
• Original PSA1:
geni.us/swpsa1 (Sweetwater)
📼 This video explains why it's a good idea to invest in a good boom arm💥💪
•Cheap vs. Expensive Boom Arms: • Cheap vs. Expensive Mi...
🎙 Ready to put your mic arm to use and start your own podcast? Check out The Podcaster Playbook, my step-by-step DIY course to help you launch your show!
podcasterplaybook.com
⏱ Chapter Markers:
0:00 - Intro & Disclosures
1:20 - Spoilers: Which Arm to Get
2:09 - Size, Weight, & Feature Comparison
3:29 - Spring Tension
4:03 - Table Mounts & Clamps
8:02 - The Arms: Sleeves vs Scissors!
9:19 - Cable Management
10:05 - Mic Mounts (PSA1+ Takes the Win!)
12:55 - How the PSA1+ is Better
13:24 - The Biggest Issue: Loco Logos
15:23 - The People Who Make These Things
16:28 - Fixing Squeaky Arms
18:11 - How to Remove the Logos (Risky!)
20:49 - Conclusions
-----------------------
Affiliate links mean I earn a commission from qualifying purchases. This helps support my channel at no additional cost to you.
----------- CONNECT -----------
🎯 Subscribe! bit.ly/TEPsub
Instagram & Twitter: @sodarntom
Main Site: himynameistom.com
My Podcasts: himynameistom.com/podcasts
---------- SUPPORT THE CHANNEL ----------
Patreon: / tombuck
Become a Channel Member: geni.us/joinchannel
----------- MUSIC -----------
•Artlist.io (2 Extra Months Free): geni.us/ArtlistTom
•Epidemic Sound (30 Day Free Trial): share.epidemicsound.com/enthus...
----------- VIDEO GEAR -----------
•Ecamm Live for Streaming: geni.us/ecammtom
•Sony a7SIII (Main Camera): bhpho.to/3f8mMlS (B&H)
•Sony 24 1.4 (Main Lens): geni.us/sony24 (Amazon)
•Canon EOS R: geni.us/0jnes1y (Amazon)
•Sigma 24 1.4 Art: geni.us/uvi3Fy (Amazon)
•Canon RF 50 1.8: geni.us/Zw30tt5 (Amazon)
•Canon 16-35 f4 IS: geni.us/h1Ys (Amazon)
•Canon 24-105 f4 IS: geni.us/ecnKnN (Amazon)
•ATEM Mini Video Switcher: geni.us/CCj5xl (Amazon)
•Elgato CamLink 4K: geni.us/vddHN (Amazon)
•GoPro Hero 10: geni.us/gopro10 (Amazon)
----------- AUDIO GEAR -----------
•Rodecaster Pro (for podcasts): geni.us/9MKJ (Amazon)
•Rode PodMic: geni.us/EHeTTM (Amazon)
•Rode Videomic NTG: amzn.to/2ZKrHTh (Amazon)
•Rode NT1 Condenser: geni.us/fRIqw (Amazon)
•Rode Boom Arm: geni.us/shr0 (Amazon)
•Rode Wireless Go: geni.us/LvzUSM (Amazon)
•Shure MV7 USB/XLR Mic: geni.us/shuremv (Amazon)
•Shure Super 55 Mic: geni.us/ulcA (Amazon)
•Shure SM7B: geni.us/tepsm7b (Amazon)
•Cloudlifter Signal Booster: geni.us/b26l (Amazon)
•Blue XLR Cable: geni.us/bluexlr (Amazon)
---------- LIGHTS & SUPPORTS ----------
•Nanlite Forza 200 (Key Light): geni.us/9Ofr (Amazon)
•Aputure Light Dome Mini (for key light): geni.us/vf5O (B&H)
•Falconeyes Flexible LED Light: geni.us/j4ENw (Amazon)
•Small Nanlite RGB Tube Lights: geni.us/nanlite (Amazon)
•Big Nanlite RGB Tube Lights: geni.us/nTwBU (Amazon)
•Aputure MC RGB Light: geni.us/IuE4 (Amazon)
•Impact C-Stand for Lights: geni.us/k97w66m (Amazon)
•Manfrotto Tripod Head: geni.us/tGhCPR (Amazon)
•Manfrotto 055x Tripod Legs: geni.us/qMO2 (Amazon)
•Motorized Slider: bhpho.to/3ztKMJA (B&H)
•Overhead Camera Rig: geni.us/grpT (Amazon)
•GlideGear Prompter: geni.us/7K04A (Amazon)
-----------------------
- Who Am I? -
Hi! My name is Tom Buck. As a lifelong A/V nerd, I’m here to help you level up the audio and video quality of your streams, podcasts, puns, and videos. I was a high school Digital Media teacher for 11 years, and I started this channel in 2017 as a project to share my enthusiasm for digital media and teaching others while having fun along the way.
New videos are uploaded every Thursday morning, and more often when possible!
-----------------------
#Rode #Microphones
-----------------------
Episode 270: Did Rode Just Make The Perfect Mic Arm? PSA1+ vs Original - ภาพยนตร์และแอนิเมชัน
Whether it's the PSA1+ or something else, I think it's 100% worth investing in a good boom arm. Here's a video I made that compares cheap vs expensive arms so you can see why: 📼 This video explains why it's a good idea to invest in a good boom arm💥💪
•Cheap vs. Expensive Boom Arms: th-cam.com/video/nsWxvD1MCck/w-d-xo.html
Tom, I am from Europe, and I have the Q2U Samson mic that weighs 318 grams. Can I still use this mic with the PSA1+, or will it be too light for it? Also, would the mic be too light for the older PSA1 in case I cannot get the more modern PSA1+ ?
Hello; do you perhaps have a solution to a squeak in one of the joints?
What I am missing is the option to completely conceal the XLR kabel inside the arm of the original PSA1. If you use the mount that requires to drill a hole in your desk then you can run the cable trough the arm under your desk. This looks a lot better then attaching the cable to the outside of the arm with Velcro. The big new base plate might be fitted to existing big holes in your desk but these holes are typical completely at the back of your desk and most likely not at the most optimal place to mount the boom arm. For the best result you really have to dril a hole in your desk and run the XLR cable inside the boom arm.
The type of free product plqcement Rode attempts on this unit is unacceptable and their justification is an insult to any professional youtuber. A brand on the frame is worth money.
If u need a boom arm cover i can help you, i dont want to spam the web site there but if u want i can post it, tell me somthing in the coment.
I’m so glad you were able to “erode” the logo off.
If they made an automatic boom arm, would it be called the e-Rode?
@@tombuck Good one dad.
I'm glad that the only problem with this boom arm is the branding. I understand that it would be a deal breaker for content creators who use webcams (which I'm sure is most of them), but as someone who doesn't do any of that, it is simply a non-issue, so I'll probably end up getting it. Wonderful review, by the way. 10/10 review quality.
I thought it was important to talk about the branding since it is something super noticeable, but sometimes it seems like that discussion has dominated the comments. It's really an awesome arm overall and I've been using mine daily since I got it.
@@tombuck great review. Perhaps flag at the top of the video that you mention de-branding at 20. that you talk about how to remove the branding as that seems to be the problem for most ppl. Following your stuff - am also a drummer and drummers are usually no BS and have a great feel about hardware after setting up and packing down kits for years :).
Looks like they made improvements, but the RODE branding is a deal breaker. Even though I don’t do talking head TH-cams, but use it for Zoom, it’s still way too distracting. Sticking with the original.
@@Sol-In-Seoul Just paint over it lmao
use some black gaff tape if you need it covered on. the cheap
The desk adapter for the psa1+ that goes into that little section that's pre-drilled is like exactly what I need for my desk so this review was just perfect.
It's such a cool design!
I just bought two of the PSA+ arms to replace two cheaper arms I bought before I got the PSA1 and realized how great it was. I haven't set them up yet, but I actually like the way the RODE logo looks. And with a lot of podcasts being livestreamed to TH-cam, it makes sense that they would want bold logos on there to help promote their products. To me, the logos are totally fine. If it was a brand I didn't love, I could see that bothering me. But RODE makes probably the best and most interesting accessories and products. There are a lot of great brands out there but RODE consistently impresses me with their solutions to problems.
Rode really does kick butt. I’m glad you like your arms!
i bought psa1+ after watching this video, i made a video asmr unboxing the psa1+ in my channel, i hope those who are interested in this boom arm, visit my channel for a closer look it.
Hope you like it so far. How wide is the desk clamp, I wonder? I have a desk that is around 3 inches thick. I wonder if it fits.
Hey Tom I wanna just say that you have a really GREAT presence on camera with a great delivery. I expect your viewership will continue to grow to be huge because you are down to earth and great cadence makes it just easy to watch and you don't have those little quirks that most people have to annoy someone after watching several videos. I normally don't leave comments but I just felt this strongly and thought I should share just in case you happened to be checking the comments and needed to hear what a normal guy thinks of the job your doing. Keep it up Tom and good luck!
It really means a lot to hear this, thank you! I try to make the videos helpful, interesting, and at least mildly entertaining 😁
I really appreciate that you took the time to leave this comment, it definitely makes my day to hear something like this.
What kind of quirks are you talking about?
Bravo Tom! I very much agree with everything you said, but most of all with your final thoughts. I am extremely happy with your intellectual honesty, sincerity and freedom in making suggestions on how to remove those intrusive logos. My sincere congratulations. This is the real key to your success. Ancora bravo! :-)
Thank you! It means a lot to hear this. I try really hard to make the best videos possibly and explain things in a clear and mildly entertaining way 😬
Great review. I started my Podcast a few Months ago and found your channel through that. I have probably watched every video now and really appreciate the quality and truthful advice.
WOW! Thank you so much! I'm glad it's been helpful and congrats on getting your podcast off the ground 🎉
Man you are so good at what you do and thank you! You have helped me a lot. I was going to buy psa1 but now im going to buy the plus version.
Great video!
That branding though, I agree.
I would just use a permanent black marker and color the logo in, or make a Velcro slip cover for it.
The lithium grease is genius, I use it myself.
I bought it, thanks to your extensive and honest review. Man, what a dream this thing is. I'm not using it as a microphone boom but for top down shots with my Sony A6500 camera. It works PERFECT. No 'legs' in the way, easy maneuverable, smooth, silent and strong and sturdy at the same time... definitely worth the money. Thank you @tombuck !
Good Idea
I'm sold, thank you for the review. I really like that you tried to remove the branding yourself, most reviewers would just talk about it, you actually did it so kudos.
Glad it helped! I went back at it with the solvent and an alcohol wipe and was able to entirely remove all the logos so you can’t tell they were ever there 👍
I've been checking out the Rode PSA1+ and this video surprised me that the fabric was sewn onto the arm. I love Rode products, but think of the possibilities with custom fabric options. Thanks for the great video.
12:41 You can do this with the original PSA-1 too. Just untighten the knobs and grab turn the bolt from the other side where there's a thicker part.
Logo hate? No problem, it's why God created black Sharpies...
Stay Sharp, Tom!
Or maybe black gaffer tape. I keep hoping someone will do a video on whether there's a safe, effective way to completely remove the Rode logos from the MV7 or MV7X microphone.
Thank you for the excellent review! I had been looking for something helpful like this.
So glad it was helpful! 🙏
Great video. Comprehensive, honest, and informative. Cheers!
Thank you! I'm happy I was able to transfer a bit of knowledge 😁
I've just purchased the PSA1 version instead of the plus. I was just about to buy when I saw this excellent video, and had no idea about the massive, bold, white branding, contrasting against the black like it does 😏 I'm slightly disappointed because the plus version is technically superior... but never mind.
The regular PSA1 is awesome! I'm sure you'll get many years of use out of it 👍
Hmm i kinda like the branding, it’s the like clothing, got the branding on it looks often better, I get why people don’t like it but I don’t mind it at all
I've been using my PSA1 for weeks now... and it really is great... It holds position so perfectly. I can stretch it out virtually straight and it still holds position perfectly. I really do like the dual bar look too which is nice 👍
You can get the black on black affect for the logo by going over the letters with a black permanent marker. It doesn't affect the neoprene and leaves a subtle reflective surface. Again, the branding was the only thing about the arm I didn't like and now it's perfect.
I'm glad to know this works! People have recommended it, but you're the first person I know of who has actually done it.
Or it's a great reason to add your own branding to cover the Rode logo.
Brilliant review, such a quality delivery. thank you for all the efforts put into making this!
Thank you! It means a lot to hear that, I really appreciate it.
@@tombuck you're most welcome Tom, keep inspiring!
Thanks for making these amazing reviews, brother. Love your content, your energy, and the overall aesthetic of your videos 🙏
Thank you so much! This is such an awesome/nice thing to read. 🙏
7:47 YES! 100% agreed. Especially that new one is a pretty hefty piece of metal that requires some machining. And aside from that it adds weight to shipping. I feel like the mounting should be an option. So you can buy the arm and at check-out select either the clamp or the desk-hole-thing (and the price depends on the selected option).
That's a good idea! I love the desk grommets, but I've rarely used them, so I do have quite a few lying about that I feel guilty for not using.
This creates issues with the logistics when you give people options to customize.
Being a longtime Heil Boom user, I really like the PSA1+. As for the logos, I used a black sharpie to darken the print, so now it looks like black vinyl lettering.
Oh nice you actually tried the Sharpie trick! That's awesome.
@@tombuck Yeah, it took some time... had to apply multiple layers of ink to get a good clean finish.
Do you recall how many layers you had to put on? Mine is arriving today, so I'm interested in this solution.
I’ve been waiting for this video! As soon as I saw it I knew you had to be waiting to get your hands on one. Great video! Thanks Tom!
Thanks Bobby! I wanted to make sure I had plenty of time to use the arm before making the video, especially since I like the original PSA1 so much. 👍
@@tombuck that makes sense! Great video, it was awesome to learn about it. I have been thinking about getting one so thanks for the info. I’ve gotta find something to be able to put over those logos when mine comes. Ha ha
Great review! Made my buying choice super easy, thank you!
Giant Rode letters are a little off putting, but Thursdays are always the best! Great video Tom!
Twisting the microphone to attach it has always been a pet peeve of mine because it feels really risky and I've dropped microphones before because I'm trying to take it off my stand quickly but whenever there's a separate locking mount, it really calms my nerves about dropping things (which I do way too much 😂)
I'm definitely NOT a fan of that. This is so much better than twisting an expensive mic around!
Just what I was looking for. Thanks:)
You're welcome! Glad it was helpful!
Perfect Video. Helped me out a lot. Thanks!
Really happy to hear that! It’s an awesome arm overall 💪
The minimum weight the PSA1 can support is 700 grams, whereas the PSA1+ can support as low as 94 grams. Huge difference actually, and awesome for those of us with lighter mics.
Wow, I didn't realize it was that much of a difference! That's huge. It's definitely easier to balance just about any mic on the PSA1+.
when my sister started streaming I bought her PSA1 and Samson Q2U (it had amazing sound for it's price) and it kinda worked but the PSA1 squeaked.
So .. I used some WD40 witch repaired the squeaking but now the Q2U was too light for it so I needed to buy some big iron nuts and taped them to arm with black tape so it does stay xD
wow, so do you think an SM58 (298 grams) would be bouncing all over the place on the PSA1? Am I obligated to get the PSA1+ if I want to use the SM58 with it?
Thank goodness
Black sharpie to the logo for that matte black look. 😎
great video! thanks for the input!
Glad it was helpful!
Really great vid, Tom. Everything explained perfectly 👍
Are you saying that I'm good at...rambling?
@@tombuck hahaha, you know you're my Yoda.
I recently purchased the Elgato Wave Mic Arm for $99 and I was really surprised by the quality. It's meant for much lighter mics but I use an AT 4040 and it works well!
Elgato really makes some excellent stuff, and they've been forcing everyone else to up their game a bit recently. It's great.
The best part of this review for me was when you explained how to remove the obtrusive logo. If I was considering getting one of these that logo would be a deal breaker for me, well before your hack!
After making the video, I went back at it with the solvent and was able to completely remove all of the logos. I just used A LOT of solvent on each one and it was pretty easy. I rubbed them off using an alcohol wipe and it probably took about 15 minutes per logo. A paper towel will tear apart and a regular towel or brush can damage the sleeve, so a wipe works best.
Now it literally looks like nothing was ever there, it's awesome!
Whoa... really nice and practical review. Thanks a lot.
Glad it was helpful!
amazing content as always. Love your pop filters
Thank you! They're from reporterstore.com 👍
The way how R0DE is showing their logos definitely is overkilled. As soon as I received and tested this new arm, I definitely will use a black marker to paint it over! That means it will defeat their purpose by putting their gigantic logos everywhere on the sleeves. Indeed, they should reduce the size of the logos shown on the sleeves and put lesser logos or may be even change the color to grey.
Maybe they could just include decals in the box and then people who want the logos can add them on 😁
Yeah that branding is very in your face. Plus those sleeves seem to make a lot of noticeable noise when you adjust the arm. Not sure I like this design choice, personally. Good review!
The sleeves do make a bit of noise, but I can live with it. I jsut wish the branding were different. Part of me wants to cut them off just to see what will happen 😬
GREAT REVIEW !!! Very detailed explanation! I personally have the DecTron 20x18" Friction Series (Boom) Arm and it's made here in the USA and ultra durable and can hold up to 5+ lbs. So it can easily handle a heavy camera with a large lens. Not that I need for it to hold that much weight, but this arm is the highest quality, that is nearly indestructible. Works on Friction and holds it's place - No need for the loosening or tightening of knobs, a one time setup is all that is required to dial in the arms weight supporting capabilities. With no springs or rivets to loosen over time, this precision engineered arm will provide years of maintenance free performance. The retail on this is $339, but I was fortunate to get 3 on eBay for $69 each. An amazing deal! Keep in mind you'll need a pretty thick solid wood desk or a very sturdy wall mount (that you can purchase from DecTron for $69). You can get a Heil WM-1, if you can find one for around $29. All in all, I LOVE THIS ARM!, but the RODE PSA1+ comes in a close second. Again, great review.
Thanks for the recommendations! I'll have to check them out- I would love an arm that I can trust a camera on.
Thankyou so much, really helpful
Glad to hear that! 🙌
I bought the Røde PSA1 a few months back and have been complimented on my studio by a few remote clients and colleagues. Glad to see Røde have created and updated their popular boom arm. Thanks for sharing!
It’s tough to go wrong with a PSA1 👍
I'm a R0DE fan and I'm buying this arm. Thanks for the comprehensive review.
I wonder if the branded covering can be turned inside out. I mean, if the cable stays go through a hole, can you take off the covering and then pull one end through the other end to reverse it? If not, then, for me, I would just cut off the covers. It's not like bare arms have never been seen before. And, thinking further, I wonder if a hot and close hair dryer and some tweezers will let you slowly pull away the vinyl letters.
It would seem so. I'm surprised no one has shown themselves turning one inside out yet, or trying to.
This was a very helpful review. Thank you.
Glad it was helpful!
@@tombuck It was. I'll be getting this boom arm for my new setup. Thanks again.
I purchased the Rode PSA1+ last week as of this comment. I reviewed a lot of boom arms and I settled on the Rode PSA1+ and I'm very happy with my purchase. The quality of materials used are premium in feel and use. I have the Rode Podmic and, no matter what position I put the boom arm in, it stays put and does not drop down like my old boom arm. The option to use the desk grommet is a nice option If you choose to to go that route when setting up PSA1+. Side note I also purchased the RodeProCaster 2 and it has leveled up my podcast. Now to what some think is an eye sore, the Rode logo on both sides of the neoprene covering, it doesn't bother me at all but I think it's extreme to cut off the neoprene just because you don't like the logo. The other thing about the PSA1+ is you can remove the mounting pole so you can route your XLR cable through the top mount for a clean look. That's my two cents for what it's worth. B"H.
*The boom that's right for your room.*
The branding is definitely a deal breaker (I cover the Rode logo on my Wireless GO which is similarly obnoxious) but I'm sure custom sleeves will start popping up on the internet. Maybe Rode will start offering their own as well. Great and thorough review as always
I would love the custom option. I feel like there’s definitely an opportunity there 👍
Uuu. That would be nice, a custom sleeve from Rode...with their logo :D
@@tombuck Hey, don't take this as a criticism, just a comment from a guy with an a7SIII. Have you messed with the subject shift sensitivity setting? I noticed your focus jumps around when you're moving the boom arms across the frame and wondered if you tried the 0 or locked on setting
OMG The logo removal recommendation was so funny and so useful!! SUBSCRIBED JUST BECAUSE OF THAT!
I went back after this and used a lot more and was able to remove all the logos with no evidence that they’d ever been there. I put the solvent on the sleeve and then rubbed it with an alcohol wipe.
Tougher cloths or brushes can damage the material, so this was the safest way.
GREAT review, thank you! Just purchase one and subscribed.
Thank you! I hope you really enjoy the arm! Mine has been in constant use since I made this video and I love it.
Hey, Tom. I noticed in a recent video that you managed to 'remove' the logo. Would love to know how you did it!
I wen't back at it with the solvent that I mention here and it worked better! I just used a TON of it and then wiped the letters off with an alcohol wipe (paper towels shred too much and cloths/brushes scratch the fabric).
@@tombuck Cool. I've ordered the solvent...I'll let you know how I go!
Just did the job! Really happy with the result. And yes, you need to use a lot of the solvent. I found that after initial removal of the lettering, padding the area with a clean cloth (and more solvent) got me the best result! Thanks again for the advice. Now it really is the BEST boom arm available in this price point! RODE...are you listening?
I've used Rode mics professionally for many years, some might call me a 'fan boy' and I'd take that. I don't mind the branding on the arm, especially as my arm is rarely in shot anyway - but a bit of black paint or sharpie deals with it well enough, or vinyl remover as you did.
Hey Andrew, did the sharpie thing work? Just ordered one and was wanting your opinion on the looks.
@@BlueLineVibes A couple of coats seem to work - it's still visible but not so 'in your face'.
I came across that boom arm the other day and just bought it because I really liked the look, after using it for a few days now I’m more than happy :)
So happy to hear that! A good boom arm can really make things a lot easier.
Thank you for this definitive, incredibly well-made video. It made my purchase decision easy.
I'm so glad to hear this, thank you Rick!
I didn't really think about it at first, but I started noticing the logos a lot more after you mentioned it and it was distracting. I like the idea of the custom sleeves and I'm looking into it to see how a product like that would go about being made. Would you be able to give me dimensions on what the current sleeve is with the holes?
The sleeves are 13.75" X 1.75" with a width of about 1/2".
For what it's worth, I gave the solvent another shot after making this video and was able to totally remove all the logos. You can't tell anything was ever there 👍
@@tombuck One thing I noticed from the video was there looked like there was residue kind of staining the sleeve after the fact. Were you able to clean that up too?
Rode seems a bit stubborn. How hard would it be for them to provide an option? Doing that would give people what they want and let them figure out which one sells better.
If they made the padding removable, it would definitely be great. Not only because of the branding logo, but also make it easier to clean/wash should it get dirty at some point since it is still some sort of fabric that can get stained. Also, making it easier to remove allows consumers to purchase replacement when it is worn out or even a 3rd party padding(maybe even able to DIY design the padding to including you own logo or design). But I think they are doing that to prevent existing PSA1 users to purchase the new padding to be use on the original PSA1.
I'm definitely curious about the durability in tougher environments.
Bravo! Great review. Glad there are other gear geeks like me.
Thank you! I've definitely been a lifelong audio/video gear nerd. 😬
Outstanding video. Bravo.
Another life hack is to built your own cover thing for your old psu and with ur own brand on it :P
OMG, my PSA-1 started creaking a while back. Hadn't even thought of trying to fix it. Will have to look for this grease. Fun fact: Most people don't realize WD-40 is actually for cleaning for than lubricating.
I've been fighting the WD-40 misinformation for years 😁
(made the mistake too many times myself)
@@tombuck Yeah, me too.
Try WD-40 White Lithium Grease (spray) or similar. Just be sure to cover adjacent areas if spraying. BTW, fantastic for squeaking garage door axels (don’t spray the wheels themselves) and springs. It gets used more than regular WD-40 around the shop now.
Motorcycle chain lube will also work - same principle, and a lot of these are just lithium grease too.
It was formulated to drive out water moisture !
Was just looking for the differences between them, awesome review. Very sympathic, straight to the facts. I think the aggressive branding isn't that big of deal. Not a fan of it but i guess i will go with tha psa1+ anyway, since it'll be my first boomarm and just tape the logo off or remove them like you did.
Love how you do a TL:DR: before delving into the nitty gritty. I still watched the whole thing though but appreciate putting the summary up front!
Thank you! It really means a lot to hear this! Glad you stuck around after the initial "spoilers" 😁
I thought I’m the only one complaining about the LOGO lol, as a musician I love Rode but it’s just too big and too many of it LOL. By the way, there’s a cool new boom arm by Avermedia from Taiwan called BA311. Maybe you’ll be interested in it 🤣
Thanks for the recommendation 👍
Yeah that’s crazy big o.o I sold my shure MV7 for that reason. In video it’s like the boom arm is seeking attention ^^
All that branding is so unnecessary
that Avermedia arm seems to have the same construction/design as the Blue arm which I hate with a passion...hopefully it's better.
Have you considered spray-painting yours?
The branding worked. People are talking about them, which draws attention and expands the number of people who now know about their boom arms. $2.00 in materials resulted in what could have cost much, much more in marketing.
You could get some vinyl stickers made up with your logo/designs to sell as merch and place those over the Rode logo. I finally upgraded my super-cheap boom arm to a PSA1 a couple months ago and don’t regret it, but I’ll be looking at the 1+ in the future if I need any more. Thanks for the review!
This was really helpful! I am going to get the PSA1+ now, I need one and I have the original. What I'd love is to find those rode clamp bases sold by themselves, there are knockoffs, but can't seem to find the real ones for sale. Thanks for making this video, I've sent this to a couple of audio buddies!
As far as I know Rode doesn't sell them separately, but I agree! They're super good and I could definitely use some extras.
Damn I love your style and content. So helpful and honest approaches. I buying this!
I really appreciate this, thank you!
Thanks for all of the great details, and also for talking about those SUPER OBNOXIOUS Rode logos. Those gigantic logos are the reason I will never buy the MV7 microphone or this new boom arm, despite them being otherwise good products. The branding is just WAY too distracting, offensive and obtrusive. I like my PSA1 and really appreciate your thorough comparisons here.
Some people love big logos and others don't. I think you and I are on the same page in that we're not fans. It's just too distracting for me since I can't NOT read text on screen.
The PSA1 is a bit "aggressive" when you take a mic off. LOL. Truth, truthfully spoken. Thanks for the info and thoughts on the PSA1+. It's amazing how some little changes can really improve the user experience.
I've been smacked in the fact one too many times by the PSA1. I've learned my lesson 😁
Merci, ça m'a grave aidé
Great video Tom. I use an innogear but I am thinking of upgrading, this video helped me out.
I'm so happy to hear that! There really are a lot of great options out there these days.
The logos are a 100% deal breaker for me as well. Even if it were the best arm on the market, I couldn't buy it. When I make TH-cam videos I declutter everything I can to help the viewer focus. I put away coffee coasters and unplug charging cables to my keyboard and mouse, hide unnecessary stuff, etc. Just as you said I want the focus on an item I'm holding or something I'm saying. I guess Rode probably sees this working in the gamer community/twitch streams (vs "TH-camrs"). BTW, I own 2 original PSA1s.
I agree- even though my space is full of stuff, I’m aware of everything on screen and I find logos distracting (one reason why I always try and wear plain clothes on camera).
Just sharpie it lol
@@tombuck could you find a sleeve to replace the rode branded one?
Agree - though ordered one today anyway. At around 20min he shows a product to take the branding off. I kind of agree that there is a lot and it is high contrast. They should do a black on black version of the logo on black for things in sight - have seen this on some high end t-shirts etc and its the right degree of subtlety.
@@tombuck I like logos if I see something I like and want to buy I already know the brand
Well what you were always able to do and what I have done with my psa1 was cutting the xlr cable, pass it trough the entire arm (and yes it also would fit through the desk mount because the metal that goes into the desk clamp is hollow) and soulder it together with the connector at the end which results in having a cableless microphone arm which looks amazing and you don’t have to use the just 3 included velcro straps. In my opinion the psa1+ with these sleeves looks worse than the old one but has nice and new features/improvements over the old one especially the actual microphone mount, really annoying with the tightening knobs.
Nice and informative video btw, I have watched many of your videos and you kinda talked my into audio technology and especially microphones. Thank for all of that
This has always seemed like a super cool idea. Definitely something I'd like to try one day.
Thanks for the honest review. I am buying the rode PSA 1+ arm.
It’s great! I’ve used mine daily since making this video and I love it.
This is probably the last part of my audio setup I need to upgrade. I had a cheap neewer arm for the longest time and I watched a review saying the innogear arm was better than the psa1, but it is super rigid. It was just designed similarly to the the psa1 but it feels as rigid as the neewer. I love how fluid the psa1 is so I need to just purchase one already instead of fighting with my current arm to get it where I need it positioned. I love the idea of someone making custom Velcro wraps. I would definitely order one.
Either version of the PSA1 is totally worth it 👍
The quarterback dad joke is underrated 😄
The new rode PSA1+ looks amazing but the big sticker with RODE on it I’m not a big fan
My take from this video.... I am changing my background for my forth coming live streams as I love the colour theme in your shows. I love my boom arm , a Sontronics. Its just slim and holds my Rode Podmic just fine. I have drilled it in to the desk today though after watching your thoughts. Thanks Tom (love the "English style corny" jokes)
Thanks for the kind words! And for bringing up the Sontronics- I'll have to check it out!
Etsy shop idea is super cool. Nice review, Tom.
Thanks Will! I've since seen a few people put custom patches/decals over the logos and it looks pretty nifty.
The RODE PSA1 is great and the PSA1+ certainly have welcome improvements...but I have since switched to the Elgato Wave Mic Arm which in my opinion is better overall than either of them (the Elgato is also nicer looking)...although the PSA1 does seem to be more stable when you position it (out of the box)...whereas the Elgato droops a little depending on how high you position...not sure if it's because of the weight of the mic (I use a Shure SM7B) and I'm not sure if the tension of the Elgato can be adjusted...but it's not much of an issue for me and I am too lazy to look up anything on the internets which could potentially eat on my time spent on watching cat videos.
We can't interfere with cat video time- it's a priority. And elgato definitely make some really great stuff- I love my low profile arm from them.
I saw when this boom was unveiled and i was disappointed that they added the sleeves. At first, I thought Rode was making a complete tube style boom arm which would be amazing. But after watching your video, I like the boom arm more but still wish they would just make a tube style
It’s be interesting to see how they’d approach a tube style arm. I think the scissor design might play a role in helping to keep the mic’s position whenever it’s moved.
Great video!
I'm late to the party, but I've just picked this up and managed to get a workaround on covering up the white logos that looks so good!
I got some high-quality, hi-tac vinyl letters printed in both matt grey and matt black. I've tried both, and honestly, you can't tell they are vinyl stickers. They also stick perfectly to the existing vinyl print as well. I offset the logo by around 0.75mm to ensure there was no white showing from the existing logo, and if you take your time, the results are fantastic! I actually ended up going with the matt black as this was the more subtle look.
It's well worth giving this a try if you're not keen on the white logos!
great review
logo too big~
they missed a trick here, the could of allowed people to remove the sleeve and purchase custom ones.
I would love custom sleeves. It’d be super cool!
Great video, thought this might be a video coming in your channel. Thanks for your honest review and opinion. I really trust your views.
Thanks Marty! I wanted to use the arm for a while before making a video so that I could understand the differences as much as possible.
Top vid. Thanks!
The most awful branding
It’s a bit…much.
I don't like the logo.
Is the sleeve reversible ? Maybe once reversed it's still good looking and maybe without logo ?
Nope, they’re sewn on with rigid material inside. 😕
@@tombuck ok so I think they just created a market for over-sleeve that could be attached over original one with velcro 😀
Haha all your mounts puns 😂 Great video man! Thanks
Mountains of puns!
Brilliant work T.
Thanks S!
Just got this myself today. I was tired of fighting with my Compass boom arm trying to keep it from continually raising no matter how much I tightened the tension. So far I’m enjoying the PSA1+.
I bet it's a very nice upgrade over the Compass. I definitely know what you mean about "fighting" with it 😬
@@tombuck very much so an upgrade. I should’ve heeded your warning a little more when you did the boom arm comparison video. I made a mental note, I just didn’t think it would be so bad that not even tightening the tension with pliers would be enough.
great video, so professional
I appreciate that!
Just got one for Christmas today! How the heck are your videos so clear and crisp also??
Thanks Jeff! I've been using the Sony a7SIII since May (and I just got the FX3 two weeks ago). It took me a few months to adjust to Sony after using Canon for so long, but now I feel like I'm really starting to see the camera shine and I love it.
I'd try to use the black whiteboard marker pen.. It may have had maintained the visibility of the brand but be a bit "gray-ish" compared to the pinch black fabric.... Great video as usual!
That could work! I'm thinking of taking an airbrush to the part that I removed the logo on and seeing if I cna touch up some of the marks.
interesting I didn't even think about the branding until you brought it up but it's a very good point. having such a large visible logo could be distracting in filing or just regular video conferencing as well. I've been waiting to get a better boom arm tho and I think this is the one I'll get. I'll just use some black electrical tape to cover the logo on the fore arm. I think it looks pretty cool on the back arm tho.
It's definitely a personal thing. Some people don't notice and others are bothered by it. For me, the biggest problem is that the Rode logo is a word (not a shape like Apple or Nike). I can't help but read and re-read a word any time it's on screen. 😬
I love this video, really got my mind around mic Boom arms. I am also just wondering where u got them colored cords also the colored mic pop filter
I have been waiting for this one!
Great video.....ya the branding is a bit much, but I still love Rode lol
They’re a great company! I would love some sort of custom sleeves to become a thing 🤔
@@tombuck I feel like that will for shure happen.....see what I did there! LOL
great video very informative bro I'll be going with the psa1 pro+ especially because of padded desk mount that's huge plus for me. since my desk is Rgb n very strong glass but still. I also love how pads dampen the sound . new subscriber here brotha great video.
p.s. love the funny pun 🤣 jokes
Okay, so I’ve been looking for the perfect boom arm for my SM7B and I think the Plus is it. My desk already has a grommet I’m not using so if that size is accurate this is the perfect arm. And I don’t stream or anything, just use it for Voice Over acting so the logo doesn’t matter to me at all. But I totally get the complaint of being a streamer or on video and the eyes draw straight there lol. Love the vid!
I work really hard at my job too, but I don’t get to wrap my name on all my visual effects shots regardless of the 70 to 80 hours I work most weeks. My solution will be to take some scrap duvetyne and cover both sleeves with it (stitching it up real nice). Thanks for the video. Great product minus the obnoxious branding.
Thanks for the great review. I'm tempted to just make my podcast logo into a patch and sew it on over the rode one.
That would be awesome!