Have seen a lot of pictures and a few videos of you hanging with the Microtech crew. But never have I seen anyone else do what you have too two of their knives.thanks for the time and effort.
That was painful to watch but thanks for doing it. It shows the quality that you're buying. Great shot btw... that bullet was clean in two pieces. Good stuff as always
Thanks Steel Punisher 69. These knives will handle the abuse for sure. As long as they provide them for testing, I will continue with the reviews. ( I do have to give them back afterwards )
UPS just delivered my LUDT today: Apocalyptic blade w/ purple chassis. I'm impressed with the fit and finish, this will get WAY more pocket time than my utx-85.
I’m also impressed with the quality of the black coating finish used on the blade being so tough to stand up to what you put it through. I couldn’t detect, from just viewing the video on my phone anyway, any scuffing or surface scratches. I am planning to order the LUDT, but haven’t been able to decide on the blade finish. I really like the black as well as the bronze, but have been concerned that these coatings might likely not hold up well to actual use and might get worn off, show scuff marks or scratches easily. I think your video has helped to put my concerns at ease regarding that now. Thank you.
Thanks razorhaven66. To be honest, Over a period of time the black will show wear unless they do a dlc coating and the bronze will lighten up over time. The best blade finish that doesn’t show wear would be the stonewashed for sure. Hope that helps.
Thank you for your reply as that does help. Was hoping their standard black or bronze coating might hold up over a long period of time with normal type of everyday use, but the stonewashed may likely be the better way for me to go. I see where they have an “Apocalyptic” coating that appears to be similar to the stonewashed except looks more blotchy that might wear better as well, but not quite sure how good that finish would look with the knife or more precisely how well I would like it anyway. Will probably decide on the stonewashed.
razorhaven66 No Problem! I always try to answer every comment. Also, the apocalyptic finish is a great choice as it really hides marks as well. On another note, if you are worried about finish wear, the stone wash usually has a blasted clip which also hides wear very well. I know that black blades usually have a black clip. Black pocket clips show wear faster than anything else.
Good information to know and is really useful to me in helping to make my decision on which one to choose to best meet my long term use preferences and not just my look/color preference.
Liked and subscribed mr sooch sent me. Good video & I’m sold. Microtech owner and hope to own that one before they’re gone. Not sure if I’ll have the disposable income with Christmas coming but who knows.. take care
I’m getting my first microtech for Christmas. I’m torn between the ultratech and the LUDT. I’ve never owner an OTF, but I’ll let you know. Awesome tests! Enjoying the content! Merry Christmas!
Whats a good usecase for the Microtech UTX 70 and ultratech? Just everyday use? I like the idea of cutting lashing on wire harness in tight spaces on airplanes but idk if an OTF is just silly. Lots of one handed needs is my thing.
My son is about to graduate phase III of his AIT as a 12D. This is a great graduation knife and MOS specific! Will the coil spring in the action continue to deploy the blade if it encounters an obstruction or are those versions available?
Great knife! *Just don't pry anything with it* I broke the tip off of my all black m390 just trying to open my bedroom door. (Butter knives do it with ease mind you) and i find the grinds are inconsistent. I've had 1 at 7 thousands behind the edge, one at 5thousands, 2 at 10, and my most recent one is 15thousands behind the edge. Still one of my favorite knives, just wish they'd get that under control better.
I am planning to take advantage of this program. Question...what are your (or anyone else’s) opinion on the Plain vs Combo blades on the LUDT and the Ultra tanto? Thanks!
X-RING, what is the birth date on that Microtech LUDT you did the torture test on? I just ordered the same exact knife tactical black, partial serrated from EKnives.com and also ordered the Microtech combat troodon otf dagger blade, tactical black, partial serrated from them. I'm excited and can't wait to get them.
I am a dealer and always try to keep LUDTs and Socoms in stock. I am also out of them at the moment but inventory changes weekly. You can check at xringcustoms.com
Hey Franck, for lower profile and weight I would go LUDT. The Socom is my favorite but it does carry and feel much larger than the LUDT in the pocket and hands.
Thanks Jim. Microtech went from Bohler Elmax to M390. However, since they make everything in house in the USA they wanted to source USA steel instead of European steel. They are now using Carpenter 204P almost exclusively at the moment. It has almost identical properties to M390.
I love mine. I winced during the torture. I bent my pocket clip just enough that it does not stay in my pocket. What is the best way to bend it back without scratching?
Hello Tom, I hope you have been well. The best thing to do is try to get the screw removal tool and then remove and bend. Otherwise, call Microtech get an RA and they will fix it for you.
@@tom_olofsson not much to screw up.. They are way simpler than washer/bearing knives. Just a blade/handles/coil spring/button/spring/stop pin. Easy as hell to take apart. If you haven't gotten the tool let me know, I can link the exact ones
You are absolutely correct badbilly 429. That is why I always recommend buying from an authorized Microtech dealer. The Chinese are getting good with their clones but they are using CHEAP materials.
Benchmade does make a great knife and the Axis lock is buttery smooth. However, the axis isn’t as strong as you think it is. The mechanism will collapse and fail at about 50ish ft. Lbs. 👍🏼
My $35 boker ak47 will do the same thing can't see it being worth more then $150 for blade steel the frame is aluminum same a boker just can't justify the crazy price
Basta con questi video fake si è visto che il meccanismo si era un po' rovinato, si fanno le stesse cose con un qualsiasi coltello di qualità con un buon acciaio
That was painful to watch but thanks for doing it. It shows the quality that you're buying. Great shot btw... that bullet was clean in two pieces. Good stuff as always
Planning on getting a Microtech SOCOM to go with my Ultratech. Thanks for the confidence this test brings!
Great torture test. Microtech makes great knives. I’m surprised it didn’t break the blade. Thanks for the review
Thanks Joaquin! They definitely cost more than most but the quality, fit and finish is all there.
Have seen a lot of pictures and a few videos of you hanging with the Microtech crew. But never have I seen anyone else do what you have too two of their knives.thanks for the time and effort.
Christian Mire check my latest video with an Ultratech OTF
Thanks Christian. I was on their shooting team for a while when they had one. Great people for sure!
That was painful to watch but thanks for doing it. It shows the quality that you're buying. Great shot btw... that bullet was clean in two pieces. Good stuff as always
Thanks Steel Punisher 69. These knives will handle the abuse for sure. As long as they provide them for testing, I will continue with the reviews. ( I do have to give them back afterwards )
Holy crap! Nicely done. I almost missed the last couple mins of the vid, but so glad I didn't. Very impressive.
That was pretty awesome. Thanks for another great video ray.
Thank you brother!
Have a 2010 model. Still going strong after much use. Thanks for the review!
Micotech LUDT is a great blade. I still carry mine everyday work and play. Great review Ray.
Thanks Live4wild. It’s been a while.......might be time for another giveaway!!
UPS just delivered my LUDT today: Apocalyptic blade w/ purple chassis. I'm impressed with the fit and finish, this will get WAY more pocket time than my utx-85.
I’m also impressed with the quality of the black coating finish used on the blade being so tough to stand up to what you put it through. I couldn’t detect, from just viewing the video on my phone anyway, any scuffing or surface scratches. I am planning to order the LUDT, but haven’t been able to decide on the blade finish. I really like the black as well as the bronze, but have been concerned that these coatings might likely not hold up well to actual use and might get worn off, show scuff marks or scratches easily. I think your video has helped to put my concerns at ease regarding that now. Thank you.
Thanks razorhaven66. To be honest, Over a period of time the black will show wear unless they do a dlc coating and the bronze will lighten up over time.
The best blade finish that doesn’t show wear would be the stonewashed for sure. Hope that helps.
Thank you for your reply as that does help. Was hoping their standard black or bronze coating might hold up over a long period of time with normal type of everyday use, but the stonewashed may likely be the better way for me to go. I see where they have an “Apocalyptic” coating that appears to be similar to the stonewashed except looks more blotchy that might wear better as well, but not quite sure how good that finish would look with the knife or more precisely how well I would like it anyway. Will probably decide on the stonewashed.
razorhaven66 No Problem! I always try to answer every comment.
Also, the apocalyptic finish is a great choice as it really hides marks as well. On another note, if you are worried about finish wear, the stone wash usually has a blasted clip which also hides wear very well. I know that black blades usually have a black clip. Black pocket clips show wear faster than anything else.
Good information to know and is really useful to me in helping to make my decision on which one to choose to best meet my long term use preferences and not just my look/color preference.
NICE test, im already a believer but that was a staunch affirmation! hats off to jmcoy as well !
Thanks John! I hope you have been well sir!
Great knife great test!!
That is one tough knife and keep the edge....Wow....Awesome info....Good stuff....
Thanks Scott and thanks for watching. Blade Steel is everything.
Good review!
Liked and subscribed mr sooch sent me. Good video & I’m sold. Microtech owner and hope to own that one before they’re gone. Not sure if I’ll have the disposable income with Christmas coming but who knows.. take care
Great test
Thanks Rick!
That’s one tuff knife ray thanks for sharing , I am a believer that you get what you pay for
Likewise talking rock! I have always believed in that saying as well as buy once cry once.
Many Thanks
These always KILL me. I’m glad you do them but man are they hard to watch. Full Alvin mode 😂👍🏻 Against the grain was the hardest to watch.
I know what you mean InSight Freedom. That was the most chipmunk I have ever done in a video. I sped it up as fast as iMovie would allow.
I’m getting my first microtech for Christmas. I’m torn between the ultratech and the LUDT. I’ve never owner an OTF, but I’ll let you know.
Awesome tests! Enjoying the content!
Merry Christmas!
Thank you Douglas. I hope you and your family have a Merry Christmas as well!
Loving these test vids, can you maybe test an stitch?!
Whats a good usecase for the Microtech UTX 70 and ultratech? Just everyday use? I like the idea of cutting lashing on wire harness in tight spaces on airplanes but idk if an OTF is just silly. Lots of one handed needs is my thing.
Really cool test video. I'd Say your a Microtech OG. lol
They like the reviews, so I will continue to use and abuse. Plus, I have been carrying them for so long I already knew they were good to go.
My son is about to graduate phase III of his AIT as a 12D.
This is a great graduation knife and MOS specific!
Will the coil spring in the action continue to deploy the blade if it encounters an obstruction or are those versions available?
That was impressive!
Thanks Rev. Gunn.
Great knife! *Just don't pry anything with it* I broke the tip off of my all black m390 just trying to open my bedroom door. (Butter knives do it with ease mind you) and i find the grinds are inconsistent. I've had 1 at 7 thousands behind the edge, one at 5thousands, 2 at 10, and my most recent one is 15thousands behind the edge. Still one of my favorite knives, just wish they'd get that under control better.
I’ve watched a few of your videos but damn hammering that blade against the grain through a 2x4 then shooting it lol! Fine I’ll Sub now😂
Good stuff 👍
Thanks Keith and thanks again for watching.
I am planning to take advantage of this program. Question...what are your (or anyone else’s) opinion on the Plain vs Combo blades on the LUDT and the Ultra tanto? Thanks!
My pleasure Roma. All of my blades have partial serrations. It does make it more versatile for cutting.
Great Video! Great knife! Can you make it so that Chuck doesn't lose it? Sootch sent me to this video eventhough im already a subscriber
Lol! Thanks Alaskan. Don is a great guy.
Bro
your killing me watching you trash those knives....LOL
I know it! They do provide the knives for testing and they have to be returned afterwards.
I hate to see you abuse a quality skinner like that, but it's great to know they will hold up to the task.
Same here but they did provide it to me for testing. They are great knives.
Bad ass knives for sure one day as I know worth the money
Now... M390 or 204P? Decisions decisions.
Hi, could you make a test with Cold Steel AK47 vs Microtech of your choice?
Do the new Dirac please
First! Thanks for the content
Thank you Brian and thanks for watching.
X-RING, what is the birth date on that Microtech LUDT you did the torture test on? I just ordered the same exact knife tactical black, partial serrated from EKnives.com and also ordered the Microtech combat troodon otf dagger blade, tactical black, partial serrated from them. I'm excited and can't wait to get them.
Are you a dealer ray? Or recommend a dealer. Not much in stock around
I am a dealer and always try to keep LUDTs and Socoms in stock. I am also out of them at the moment but inventory changes weekly. You can check at xringcustoms.com
What would you chose if you have the choice between an ludt m390 apocaliptic or a socom elite ?
Hey Franck, for lower profile and weight I would go LUDT. The Socom is my favorite but it does carry and feel much larger than the LUDT in the pocket and hands.
@@XRING thanks . I ll have to get both 😆
Man that’s one tough little folder . I believe you when you say it will last a lifetime. What type of steel is that blade ?
Either elmax or 204p
Thanks Jim. Microtech went from Bohler Elmax to M390. However, since they make everything in house in the USA they wanted to source USA steel instead of European steel. They are now using Carpenter 204P almost exclusively at the moment. It has almost identical properties to M390.
I love mine. I winced during the torture. I bent my pocket clip just enough that it does not stay in my pocket. What is the best way to bend it back without scratching?
Hello Tom, I hope you have been well. The best thing to do is try to get the screw removal tool and then remove and bend. Otherwise, call Microtech get an RA and they will fix it for you.
X-RING Cool, I will try the tool. I did not want to start tinkering with an auto knife and screw it up.
Tom Olofsson You wont need to go into the knife. However, make sure you get the right tool. Those can be difficult to find.
@@tom_olofsson not much to screw up.. They are way simpler than washer/bearing knives. Just a blade/handles/coil spring/button/spring/stop pin. Easy as hell to take apart. If you haven't gotten the tool let me know, I can link the exact ones
TylerDD Easy for you to say. You probably have 8 fingers and 2 thumbs. I was born with 10 thumbs. Fine repair work is not in my area of expertise.
Yeah, but is it a tough knife?
LUDT VERY WELL
Yes. Thanks for watching Yohann.
@@XRING My favorite microtech is Socom élite and LUDT , very good knives for tactical police and military
Yohann Mawash I agree with you 100%. Elite and Socom for me.
@@XRING
at work I have an elite socom and a rescue LUDT
Sorry, but no you cannot borrow my Microtech
Kevin Roberts that was good!
Kevin Roberts can I borrow it
@@IY6C NO!! YOU WOULD JUST HAND IT TO X-RING, PARTNER IN CRIME!!
Can I have this ludt lol be perfect for my job
soon torture test socom ???
Yohann Mawash filming that one today ! It’s going to be brutal.
@@XRING OK very good
Awesome knife and also probably the most faked/and imitated knife of all time
You are absolutely correct badbilly 429. That is why I always recommend buying from an authorized Microtech dealer. The Chinese are getting good with their clones but they are using CHEAP materials.
😭
I roll a 2001 UT
Did he say 250 bucks!!!!! I'd rather buy a gun
then buy a gun and you can't even buy a new gun for $250
Gonna be a crap gun. Should see what those of us that buy these spend on guns. My 22s glass probably more than yer best centerfire loadout.
My benchmade 810 would spank that knife or a 940
Benchmade does make a great knife and the Axis lock is buttery smooth. However, the axis isn’t as strong as you think it is. The mechanism will collapse and fail at about 50ish ft. Lbs. 👍🏼
You are not splitting against the grain, your cutting it . :):)
Not to split hair :)
LOL! You are absolutely correct Val. Rick and I were doing a video marathon yesterday. Got a little sloppy with my description.
🤣 Ray is awesome,, love these vids...👍
Firsts
Thanks Brian and thanks for watching.
My $35 boker ak47 will do the same thing can't see it being worth more then $150 for blade steel the frame is aluminum same a boker just can't justify the crazy price
Basta con questi video fake si è visto che il meccanismo si era un po' rovinato, si fanno le stesse cose con un qualsiasi coltello di qualità con un buon acciaio
That was painful to watch but thanks for doing it. It shows the quality that you're buying. Great shot btw... that bullet was clean in two pieces. Good stuff as always