How to Replace Upper Ball Joint 1992-1996 Ford F-150

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ก.ย. 2024
  • Buy Now!
    New Ball Joint from 1AAuto.com 1aau.to/ib/1ASB...
    This video shows you how to install an upper ball joint on your 1992-1996 Ford F-150. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions. Fortunately, they are relatively easy to replace with the right know-how.
    This process should be similar on the following vehicles:
    1992 Ford F-150
    1993 Ford F-150
    1994 Ford F-150
    1995 Ford F-150
    1996 Ford F-150
    Tools you will need:
    • 18mm Wrench
    • 13mm Socket 1aau.to/obmb/1A...
    • 15mm Socket 1aau.to/obmb/1A...
    • 18mm Socket 1aau.to/oab8/1A...
    • 21mm Socket 1aau.to/oab8/1A...
    • Ball Joint Press
    • Brake Caliper Hanger 1aau.to/ohQ/1AX...
    • Dead Blow Hammer 1aau.to/oRz/1AX...
    • Pliers
    • Side Cutters
    • Snap Ring Pliers
    • Air Chisel 1aau.to/obu/1AX...
    • 7/8 Inch Socket 1aau.to/obf/1AX...
    • 1/2 Inch Ratchet 1aau.to/oab8/1A...
    • 1/4 Inch Ratchet 1aau.to/oa3x/1A...
    • 3/8 Inch Drive Ratchet 1aau.to/obmb/1A...
    • Torque Wrench 1aau.to/oayB/1A...
    • 1-1/8 Inch Wrench
    • 5/16 Inch Wrench
    • Brake Parts Cleaner
    • Gloves 1aau.to/oTQ/1AX...
    • Safety Glasses 1aau.to/oL7/1AX...
    • Floor Jack 1aau.to/oYu/1AX...
    • Hammer 1aau.to/oRz/1AX...
    • Wheel Chocks
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

ความคิดเห็น • 7