Your bumper and that bobbed bed make it look way better! I liked how it looked stock, but those have both proven to be major improvements. I'd leave it no bumper on the back.
I love how it came out. The imperfections are fine. It just shows that your human like most of us..Not everything has to be super perfect. I want to do something like that. Thanks For Sharing!!!
Nice job on the bedsides josh. Looks good. If u dont mind puttin a hole in the back of the cab, u could put a screw just inside the fender to keep it from pushin in n breakin off. All the more thats there, a screw with a nut under the screw head would give enuf for the fender to push against, but shouldnt b so much u can see the screw very easily
Awesome! Can you show us clocking the motor and possibly show us how you would modify the suspension to your likings? I remember you saying the rear could be slid forward to bring the rear down. Have an amazing day!
They might be a little pricey, but I like the DuraTrax Deep Woods 2.2 tires and a black and chrome wheel combo, available from A-Main Hobbys, for $31.49 per pair. With those big fender cutouts, they should fit. As long as it's a 12 mm hex.
Put a red strip on the wheels, they already look like American Racing black wagon wheels. I like it better with the bed, and the imperfections make it look like the builder forgot about the bed after slapping full size axles and huge tires under the truck and just took a sawzall to the bed to make it work.
On the inside of the fender that isn't supported you can cut some Cyrene do the same shape as the fender glue it to the inner Fender and then cut it so it matches the delron parts and then at least secure a little more rigid
It's a nice job definitely getting the Body Lines looking true now it just needs a so the tires and maybe some fresh paint all around unless you like that colour which case looks great
Looks great! I think some full link side decals or pinstriping from front to back would help to tie the whole thing together.Hope fully the aftermarket will come up with something also to add to that unfinished looking flatbed.I bet a roll bar would look good added to yours.Or maybe a canopy? Really enjoy your channel and i am a "new" subscriber and scale "convert"!
I've got to do this with a trx4 defender body. I'm making an extended rear bed and which will make it a single cab. This video will help a lot. Thanks for sharing. (see Defender Perentie)
I'm gonna do the same but gonna buy a regular 4 door cab bob it in the rear I'm not into the bed that's on it awesome job on your bed look 100 percent better that way
Injora 1.9 beadlocks are cheap on eBay and quality. Truck look great to me, a tf2 roll bar on the back might finish off the bed area nicely. Most likely need to be trimmed down to fit the height of the cab.
Youve got to figure out if you are a crawler or a scale crawler, lol. SCX10 will out perform this thing all day. This C2X will look way more real crawling.
I really like the job, just as you would have seen with a budget crawler, steel wheels would fit the budget theme. I would have liked to see (rather not see) the mounting L bracket's, uder the bed would have been better, even in a channel so the bed slides on and off you would only see the bolt head's, itneeds a bit of square stock to cover the gap at the bottom of the tailgate inside. The fact the bed does not match the cab really say's made in my drive it does not need to match, a roll bar would be the finishing touch and a spare wedged in the bed, to look work in progress. Cant wait to see where it goes, heat up the tailgate and push it in a bit right where the cut is, will look like he reversed into something, don't weather it.
very nice "proof of concept", If you or someone else wanted to improve upon it all the design work has been done. Excellent. looks good overall just needs some more fastening points and dressing up if desired.
Looks much better! 👍
Holy moly awesome work brother
Looks better with the bed👍
Looks "AWESOME" it's what RC 4WD should have done
Looks way better with the new bed!
Really like how it came out. The blemishes are just character😁
I think it looks great!! Stop being so hard on yourself. You do great work!!
Best C2X I've seen on YT 👍🏻
The bobbed bed really finishes the truck the way it should've been.
That's a great look for that truck.
Great Videos 👍👍👌Greetings Andy 🙋🏻♂️
Looks awesome. Can't wait to see it on the trail
Very cool 😎 can’t wait to see your wheel choice . I am learning a lot from your channel. Thank you . 🏎🔥💨
Yes! Truck looks complete now, the flatbed is cool but flows so much better with the bed now.
Looks awesome! I have fallen in love with this truck. It is on my list....in the front of the list of trucks to get. Thank you for your videos.
Your bumper and that bobbed bed make it look way better! I liked how it looked stock, but those have both proven to be major improvements. I'd leave it no bumper on the back.
Great looking truck look for ssd slots great wheels an that old school look
I love how it came out. The imperfections are fine. It just shows that your human like most of us..Not everything has to be super perfect. I want to do something like that. Thanks For Sharing!!!
Looks s lot better. Lot of work, but looks like it paid off.
Nice hearing constructive criticism of your own work but man does that truck look perfect now !!! Awesome look, RC4WD needs to do this from the box !
Grey is surprisingly hard to match.
Truck looks more complete now.
Great craftsmanship!
Congratulations friend excellent job I congratulate you
Lookin really good. Can’t wait to see what you come up with for it next
Looks GREAT!!!!!!!!!!!!
WOW thats such a sweet truck very nice on that bed great job man happy bashing bud.
This came out awesome. I just ordered a c2x and was thinking about getting a Mojave II bed to do a bed. Happy i found this video. Good job man.
Looks better with the bed good job 👍
And I think it changes the whole look of the truck I like it way better this way nice job
Wow turned out awesome dude, I like it !!
Nice job on the bedsides josh. Looks good. If u dont mind puttin a hole in the back of the cab, u could put a screw just inside the fender to keep it from pushin in n breakin off. All the more thats there, a screw with a nut under the screw head would give enuf for the fender to push against, but shouldnt b so much u can see the screw very easily
awesome job made it look even better awesome video
Awesome build keep up the good work. 👍👍👍👍
I think you did a great job I think it looks sick awesome
Very very sweet job.
Great Work! 👊
Great video. You’re very creative and talented. Keep put out the vids. Awesome music also. Thx.
Great job! Much cooler than stock.
Good work!!
Just when I didn't think I wanted that truck anymore
You do this
Also I wonder if anyone will ever make a 3D printed bed for this body that would be so cool!
Friggin sweet dude!
Lots of work involved but worth it
I even have a couple of old Tamiya beds i can cut up.
Sick man looks awesome
Awesome! Can you show us clocking the motor and possibly show us how you would modify the suspension to your likings? I remember you saying the rear could be slid forward to bring the rear down. Have an amazing day!
They might be a little pricey, but I like the DuraTrax Deep Woods 2.2 tires and a black and chrome wheel combo, available from A-Main Hobbys, for $31.49 per pair. With those big fender cutouts, they should fit. As long as it's a 12 mm hex.
If the paint matched and I didn't see the process I'd say that was factory. It really suits the truck and it came out awesome. It looks complete now
looks great, awesome fab work
Awesome job I think it looks brilliant fair play.
Looks sick!!
Your bed fits perfect. Just my opinion. 👍
Killer ,,, you are the master!!!!!
That is how it should have been. Great work.
Looks fantastic!👍🏼
Put a red strip on the wheels, they already look like American Racing black wagon wheels. I like it better with the bed, and the imperfections make it look like the builder forgot about the bed after slapping full size axles and huge tires under the truck and just took a sawzall to the bed to make it work.
That looks brilliant. Top work!
Great job
That looks great. I see a hi lift jack and a shovel looking great on it. I'm going to check out your Humvee video now.
On the inside of the fender that isn't supported you can cut some Cyrene do the same shape as the fender glue it to the inner Fender and then cut it so it matches the delron parts and then at least secure a little more rigid
It's moderately perfect! Awesome job. I used to like the YO trucks too.
It looks awesome dude
Amazing job brother
It's a nice job definitely getting the Body Lines looking true now it just needs a so the tires and maybe some fresh paint all around unless you like that colour which case looks great
Nice touch 🤙
Spettacolo !!!
Looks great! I think some full link side decals or pinstriping from front to back would help to tie the whole thing together.Hope fully the aftermarket will come up with something also to add to that unfinished looking flatbed.I bet a roll bar would look good added to yours.Or maybe a canopy? Really enjoy your channel and i am a "new" subscriber and scale "convert"!
Great job looks great😎👍👍🇺🇲
Great work men!!!👍🤙👍
The couple of imperfections look like bond-o, extra scale points.
This looks amazing
Spot on looks good like it should of.
I've got to do this with a trx4 defender body. I'm making an extended rear bed and which will make it a single cab. This video will help a lot. Thanks for sharing. (see Defender Perentie)
Where's the music from? Thats fire. Great upload
I'm gonna do the same but gonna buy a regular 4 door cab bob it in the rear I'm not into the bed that's on it awesome job on your bed look 100 percent better that way
Those imperfections make it look scale
Injora 1.9 beadlocks are cheap on eBay and quality.
Truck look great to me, a tf2 roll bar on the back might finish off the bed area nicely. Most likely need to be trimmed down to fit the height of the cab.
Looks pretty cool! What about adding wood floors?
Looks great! If it was perfect it wouldn't be an off road truck!👊😁👍🇺🇸
Have a look at SSD wheels.
Some great styles for a fair price and they mount up with no drama.
It's your truck or 'Yo' truck in the end its only your opinion that matters on our own trucks 👍
What a cool truck I want one man. I’m new to the crawling scene and on the fence with what platform to start with.
Youve got to figure out if you are a crawler or a scale crawler, lol. SCX10 will out perform this thing all day. This C2X will look way more real crawling.
You can get bed scanned and 3D printed to sell. Do a patina job on the body and use a sticker to cover up the tailgate cut through.
Omg its amazing. Wonder if u can make more for sale?
I like it 👍🏼
Looks amazing I went with the Marlin instead though .
What about the marlin rims bet they'd look cool
I think it looks great : )
Where do you find this truck and what price should I expect?
Thanks . Yours turned out well. Would like to find the 89-95 body as well
Looks Great ;-)
I really like the job, just as you would have seen with a budget crawler, steel wheels would fit the budget theme.
I would have liked to see (rather not see) the mounting L bracket's, uder the bed would have been better, even in a channel so the bed slides on and off you would only see the bolt head's, itneeds a bit of square stock to cover the gap at the bottom of the tailgate inside.
The fact the bed does not match the cab really say's made in my drive it does not need to match, a roll bar would be the finishing touch and a spare wedged in the bed, to look work in progress. Cant wait to see where it goes, heat up the tailgate and push it in a bit right where the cut is, will look like he reversed into something, don't weather it.
A few scale accessories, it will look more rugged
I think ima build a aluminum bed/roll cage type of bed
Groovy🤙
very nice "proof of concept", If you or someone else wanted to improve upon it all the design work has been done. Excellent. looks good overall just needs some more fastening points and dressing up if desired.
I like it better with the bed
Love it man. How'd you glue it?
I use JB plastic weld 2 part epoxy for gluing body things.
Thanks man. I have a bed I’m about to bob for my C2X and the right glue was the missing link in my plan!
YO! i like it
Will the marlin bobbed bed work on the C2x?
Its still too long, would have to cut the front down all the way to the fender
@@RCeveryday tyvvm
Link to bed please 😊
This is RAD
Where can I find those wheels and tires like the way they look
Rc4wd website