His efforts would've been better spent on a different Casiotone model. The "Tone Bank" keyboards such as the MT-240 were possibly the least interesting and desirable ones Casio made. I wouldn't have bothered restoring this one.
@@diggydude5229 Just a note: not trying to make any assumptions, just speaking with your comment as context. It seems like you're missing the whole point, he's not restoring all of this stuff for interest, it's just for the sake of restoration as a means to preserve history as well to teach
Actually.. I wanted to try a nitromethane product. I had read about those on the internet. But I visited several stores such as home depot, hobby lobby, etc. I never could find it.
Conductive paint is a good way to make connection to those printed carbon tracks under the buttons that you can't really solder to! Also, there's a substance meant for repairing the heated tracks on automobile rear windshields that can work, too.
Conductive ink, I bought the cheap stuff from AliExpress and am doing test on my own. The problem I have encountered is that it doesn't 'grab' to the surface sufficient, so if you wipe the windshield 2 or 3 times the ink is gone. I'm going to test the 3M proper ink for windshield heater repair and report back the results
@Jojo Tully Music haven't got the proper 3M ink but by experimentation I think I found the trick to do it properly. You must use not the first "squirt" of the pen but let the ink flow and then start your trace (like painting with a spraypaint can). Also letting it cure for days before touching it helps a lot
I always remove super glue with - super glue :P This sounds stupid, but the solvents in the fresh super glue make the dry glue come off again most of the time. You just have to be quick at wiping it off before it hardens :)
You put the fresh super glue on the hard glue, wait until the solvents make the old one liquid again and wipe it off quick to make sure it doesn't harden again ^^ Note - This doesn't work with all glues.
your german is terrible.... you realize that most of the world doesnt speak english natively.... that maybe, just maybe you are the ignorant one here.... in real life....
I can confirm, the MT-240's black keys were bonded to the white keys at the factory. I took one apart in the early 90s to repair some broken black keys and noted the same thing. The keyboard was a gift and I was only a teenager, so I couldn't afford anything that would work with the MIDI interface. I've always been curious about something: how many instruments is the keyboard capable of playing if you use it as a MIDI output device? I remember being able to access some instruments that weren't normally available from the front panel, by momentarily shorting pins together on the large, square IC on the logic board.
I had the Casio MT-240 back in the early 90s and used it a LOT on my Atari ST/STe computers. I used to looooove the way they sounded and it was a pretty affordable way to get MIDI back then. I don't know what ever happened to it and I regret not still having that keyboard with me despite all the other things I've managed to keep. I recently picked up another one and I especially love that demo song ("Night Birds" by Shakatak, 1982). Excellent version of it! In any case, the new keyboard seems to be in generally good condition but that 9v power supply connector is loose on the new MT-240 and I seem to remember that it was ALWAYS loose even in my old one back in the day. GREAT keyboard--I remember wishing it had general MIDI back as a kid but it was still fantastic!
I have a 260 that I picked up at a junk store for $10. The piano sound is beautiful on it, whatever stereo chorus effect they use is great, and it makes a great MIDI controller for trying out VSTs.
That corrosion was probably from the leaky battery. It would explain the mark on the rubber membrane and the eaten-through track on the PCB. I'm guessing the keyboard was stored upside down for some years in that state.
Gotta love these tear down videos. I really enjoy seeing how this old tech worked. I've always loved piano music and these videos are truly awesome to watch.
thanks for sharing your knowledge. I've been able to clean a few old keyboards I've found on Craigslist because of your example, and it was you who turned me on to the Yamaha PSS series, which has become one of my favorites. You rock!
12:00 I learned that the hard way. Once, I accidentally spilled a little super glue on my laptop (which I'm using to type this comment). I used acetone to remove the super glue, but it also left a white spot on the screen bezel (that's where I spilled the super glue).
Note to everyone: Be careful with the rubber domes for the buttons on keyboards of any kind as the are coated with a conductive coating that allows them to complete the circuit when making contact with the copper trace on the board allowing the circuit to be completed, over time that coating can where away making them not work at all, so be careful if you try to clean them.
Another great episode, I'm always impressed by how patient you are in cleaning and repairing these keyboards. And your little demo of the "Synth Reed" instrument just made me reinstall "Space Quest" on my computer ;-)
This keyboard actually has more tones than you think. The button that's labeled "210 SOUND TONE SOUND BANK" lets you pick two tones from the tone selection area and combine them. So, for instance, you can combine the chorus and the accordion to get a unique sound. But you can only combine a tone from the top with a tone on the bottom. That'll give you a very wide range of tones to pick from and play around with.
From Gwendoline Leong channel Hi do you know how to "on" the keyboards? My Casio CTK495 works fine the Tone/Rhythm/Song bank. Just the keyboards.have no sound whatsoever. Maybe just a wire loose? Plug? What possibilities can you think of?
You offer a wealth of insight into the construction of Casio keyboards. about a year ago a friend donated a ctk-651 to me. The CTK series are probably a step up from the MT series. But they still don't offer the quality of sound that's inherent in the WK series. I have had issues recently with keys playing either softer or louder than others and also with the DC input jack. The friend who I mentioned earlier is willing to donate his WK series to me 4 loan. So I'm glad that I found your video when I did. I'll have to become used to doing my own maintenance to keep up what I have. Thx 4 posting
You can buy conductive coating remote key pad repair kit (check eBay) to get those non-working keys to work. It worked fine with my old Roland D-20 synth.
Love this. I have one that I bought new when they first came out. You definitely hit the best sounds on the thing. Having a decent piano made it a very useful and inexpensive module back then.
Hey i wanted to ask something: Can you put the song name of the samples that you play in the corner or somewhere like that in your next video? I really like the samples and i would love to know the names of them.
I would also appreciate this. Is the "request a song" still on? I'd love to hear your rendezvous of the Lotus Turbo Challenge II main theme (the Amiga version) in a keyboard of your choice. Very instructive and inspiring videos. Thank you!
I had that keyboard as a kid. One cool and surprising feature I found by mistake is that there are additional sounds that are only accessible via MIDI. Using a computer and a MIDI sequencer allowed me to discover the additional sounds. Yes, there is only 20 actual sound banks out of the box, but with the additional MIDI banks there are at least 20 additional sounds, (40 in total) with MIDI access.
I personally own this keyboard and I love it because it's super cheesy but you can make some crazy sounds with it if you mix the instruments and mess with the midi, auto accomp., etc... My 210 sound bank thingy works perfectly with both the top and bottom sound banks and even though it's missing the F#0 and F#1 keys (0,1 i assume is the octave not sure if it goes as low as an 88 key).. Anyway I heard that through midi you can access "hidden" sounds like fantasy and some others but for the life of me every time I look for any information on these in depth features I can't find jack squat. The internet is flooded with circuit bending tutorials on this but I don't own a soldering Iron and I don't feel like spending a gajillion hours bending this thing. I checked the manual and it hints at these features but doesn't really explain how to use them. I was hoping that you or perhaps one of the other followers could shed some light on the more intricate operations of this keyboard. I've seen all your videos and it's inspired me to try making music by rigging up these vintage toy midi keys with my more professional Korg poly 800 (circa 80's) as well as modern synths like the Korg volca keys or VSTs in Ableton. Also THIS CHANNEL ROCKS! I've always loved these cheesy keys and it's nice to see that there is a community of people who do to. Keep it up!
I have this keyboard and I use it with maschine. I accessed those hidden sounds by going from midi out of maschine to the midi in on the keyboard. In the maschine software I set up a macro and added a page for midi program change. The extra sounds are on program numbers 20-29.
This video hit my nostalgia button. My sister got this exact model for Christmas one year. I learned to play piano on it. Great video, and it's too bad about the superglue.
I have a Casio MT400V, and I don't know what year it was made. Buying that keyboard though was what made me start watching more of your videos though, so thanks for the journey!
The Casio MT 240 actually got 10 additional hidden sounds you can select using program change over MIDI. It is also 3 channel multi timbral over MIDI so you can hook it up to a sequencer and play different sounds simultaneously over different MIDI channels.
I'm guessing the glue was to keep the stickers from peeling, back when I was in school I had a keyboard and wrote the notes on the keys to tell me which was which.
8-bit, I love your channel and the attention and care you show these instruments despite their humble origins and sometimes humdrum sounds. These aren't going to be around forever -- unless someone takes the care you do. Thanks. I think by treating them with respect you elevate "the game" (collecting, playing music, restoring instuments)!
Loved it as always. Is it possible to "upgrade" a monophonic keyboard to a polyphonic one? Like some of the those early white Casio toy keyboards like PT-80?
By the time you were done, you might as well have built your own synthesizer from scratch! What you COULD do though, is use the keys and switches to trigger a polyphonic synth built around a suitably beefy microcontroller, and stuff it in the case! All the "magic" happens in the program code and the actual wiring side of things is pretty easy.
yeah i am never sure why he doesn't use goo gone on any of his things. only negative i have ever dealt with is trying to mop up all the residue as it is a slight pain to clean up after
I like how this channel started off being keyboards but turned into a showcase for all types of old electronic instruments from the 70s to mid 90s including drum machines, gaming tracker interfaces and tape decks now as well. 8-Bit Audio Tech a more fitting name now.
yeah, but lots of keyboards can do that.. where do you draw the line on the marketing? So my Yamaha keyboard with 128 sounds and dual-voice mode should be advertised as 16,384 sounds?
I was gonna say petroleum jelly or vegetable oil. But, the lard makes a lot of sense!!! Pig fat dissolves strange hard to remove things easily. I spilled magenta inkjet liquid on my hands once, and tried everything to get the junk off. Rubbing alcohol, acetone, lighter fluid (naphthalene), but nothing worked. Then, while trimming fat off some pork for my sandwich the next day, much to my surprise the fat turned pink and faded the dye. Needless to say, I greased my hands, then used alcohol to degrease. Worked like a charm.
Andy Merrett LOL I cut off or discarded the bits of meat that turned pink. Only a tiny bit did though, as I discovered near immediately. I know that magenta ink isn't completely non toxic. But I did use most of the fat to finish cleaning my hands. XDDD
Because everything in synths are either generated by basic waveform (older analogue) or samples (PCM) on newer gear. The complextities of analoge instruments, voices etc, are composed of many different components that needs to be either generated (poorly with older gear and with better luck these days Rolands COSM system for instance) or have to be multisampled on many levels to recreate as much as possible of all the nuances that create the sounds of for instance a vibraphone or a piano. When you hit a piano string with the hammer or a mallet instrument with different types of hammers, the sounds differ greatly. From soft, mellow sounds of the soft filt hammers to the crisp clunk of a wooden or plastic hammer. Then you have resonance within the instrument. The nearest strings will always resonate and create upper harmonies depending on how much they're dampened or open. Same thing with a vibraphone that's open, it will have a different sustained sound because the other mallet bars will resonate with it. Then you have ambience of the room and other instruments or just the room itself that plays a factor. You'll never be able to recreate 100% any analogue instrument synthetically, but we're getting pretty close. And nowadays instruments sound near perfect for most purposes. The older gear that David is showing will always be limited to their era in both sample memory, method of sound generation and such. Just the way it is. :)
Hello Sir, I have just found your computer channel as well as this. I have very much enjoyed your presentations. Regarding the MT240 - many memories as it was my 1st midi keyboard. I used it with a program called Lyra on my Color Computer to create accompaniment tracks for students. While you can only play the sounds on available on the instrument, when hooked up to a midi composer one could access the full range of 210 sounds so much like the roland mt32 it could be used as a sound module. Thanks for all your excellent work!
I don't even like these old computers (your other channel) and keyboards, but I enjoy your approach and ethic and knowledge and thoroughness in regard to repair.
Nice work on the keyboard! I'm amazed at how good this keyboard sounds. Some really neat sounds in there. Nice job on the button hack. Next time, you could consider using conductive paint when solder won't stick. You can use an automotive defroster repair kit or there's several solvent and water-based conductive paints out there these days. I feel pretty certain this would have solved the corroded trace issue. Also, another thing to try on the super glue is mineral oil (available at pharmacies), or motor oil, etc. It shouldn't harm the plastic and just might soften up the super glue enough to scrape it off. Finally, I'm really liking the new intro :) Keep up the good work.
I had one of these too! I heard one in a music shop in Bath and liked the piano sound - a few months later I got one and used it connected to my Atari STFM (which had built-in MIDI ports). I still have it, though I haven’t used it in a while.
about the leftover glue residue, you can try sanding it off with automotive grade sand paper (1000 grit above, higher grits will bring back the sheen after a bit of buffing with cotton), 3M sanding pads of high grit numbers can also do the trick. if you're worried about the plastic shine being fogged over the surrounding area due to the sanding, try applying some pledge floor care with a Q-tip to bring back the shine a bit.
Nice memories! I've got the MT-240 in my childhood. Now is in the hands of my brother, still working fine. One clarification, you say it has 20 instruments, and 210 "combinations". In reality it has not 20, but 30 real / direct instruments. The problem is that you can't access those instruments (21-30) via the buttons in the keyborad (AFAIK). How can you play with those instruments? programing via MIDI comands of course. Use a controler (or PC) via the midi IN port. In the controller, using bank 1, change the patch (1-20) to get que standart instruments. Use the patch 21-30 to get the extra included instruments. You can play the instrument via the controller or the piano keys!
That button bypass was pretty ingenious, specially if you're just going to use the output on the back to run it through a mixer or another recording device.
Ahh memories...Used two of these midi'd to my Amiga 500, endless fun throughout the 1980' and 90's ! great Casio sounds, especially when layered (you can layer two !). if i remember correctly, select the first tone, then select the mutli/split and then select the second tone.Eg strings and piano. This is where they get the 210 sounds claim from.
Hi I enjoy watching your videos, they are both informative and helpful. I have recently acquired a Yamaha PSR-185, from a deceased close friend, this thing is nearly 20 years old, it works but the volume slider is scratchy, only one loudspeaker works and some of the keys have to be struck hard to make a sound, this instrument is sentimental to me, as we used to play on it when we were young and I'm really afraid to take it apart and clean it, in case it breaks. Many thanks
Hey man, I love your videos! I have a Casio PT-100 and a Yamaha PSS-270, bought em each for under $10, and cleaned em both up, they look like brand new! The only issues I had cleaning up the Yamaha, were the tiny tiny ball bearings in the sliders, and reassembling the keyboard (as i took the whole damn thing apart XD), Goo be gone was my best friend, as the original owner put large stickers on each key, even putting stickers on those stickers!? But 8 hours of reverse engineering later, I got both up and running in tip top shape, and funny enough I now use them for my tunes, I love the FM synthesis on the PSS-270. It's like a baby DX-7.
I have this one and have circuit bent it many times. Same reproducable bend. The battery left inside the keyboard issue is always an issue with me too! Almost every board I have bought or found in flea markets and pawnshops,ebay and so on, had batteries left inside to leak or make the board too heavy for reasonable shipping costs. This keyboard was my FIRST ever keyboard purchase with my first ever paycheck at 14 years old back in 1989! It cost $142 in K-mart in Puerto Rico and was my first video recorded keyboard as well!
I have this exact model of keyboard that I rescued from a flood a year ago. It was literally floating like a boat and it was completely covered in mud. Gallons of water and lots of scrubbing was required to get it clean. And after that, the thing turned on and was perfectly functional. Unfurtunately, a month after, it just stopped working! I think it was the moisture that damaged some chip or inductor...
Just wanted you to know that these videos are mint even though I don't even know how to play the keyboard or any other instrument. Oh and I just became a patreon!
"Alcohol is my number one, first line treatment for stuff like this." Same here, I just drink until I forget about having to clean it.
haha good answer alcohol is good to much ;D
While alcohol is an organic solvent, it has proven NOT to work well on problems... ;)
rolling rock fixes everything
As Homer Simpson says, "Alcohol is the cause & solution to all life's problems"
@BadStuff Especially if you're reviewing shitty NES games ;-)
3:40 "But, others were just more stubborn, so I came back with a knife"
- 8-Bit Keys 2016
it's a crime there is no comments on this.
😂😂😂💀
this video was made in 2016 not 2017 sorry to ruin your fun :(
@@babbyblueytoldchannel9180 spoil sport
No-context 8-Bit Guy always makes me laugh
The patience of this guy is as big as his talent and taste for music.
His efforts would've been better spent on a different Casiotone model. The "Tone Bank" keyboards such as the MT-240 were possibly the least interesting and desirable ones Casio made. I wouldn't have bothered restoring this one.
@@diggydude5229 Just a note: not trying to make any assumptions, just speaking with your comment as context.
It seems like you're missing the whole point, he's not restoring all of this stuff for interest, it's just for the sake of restoration as a means to preserve history as well to teach
I do adhesives for a living. Sicomet D-BOND is the product of choice
Active ingredient is nitromethane
Actually.. I wanted to try a nitromethane product. I had read about those on the internet. But I visited several stores such as home depot, hobby lobby, etc. I never could find it.
That sounds better then the product I was going to suggest. It's called Goof-off and it's at Lowes and Home Depot.
Aaron Lopez
isnt the fuel used for RC cars Nitromethane and methanol?
Buy nitromethane fuel, It's used for rc cars, and it's nearly 100% nitromethane, I use it to remove old stickers from old bikes
Conductive paint is a good way to make connection to those printed carbon tracks under the buttons that you can't really solder to! Also, there's a substance meant for repairing the heated tracks on automobile rear windshields that can work, too.
Conductive ink, I bought the cheap stuff from AliExpress and am doing test on my own. The problem I have encountered is that it doesn't 'grab' to the surface sufficient, so if you wipe the windshield 2 or 3 times the ink is gone. I'm going to test the 3M proper ink for windshield heater repair and report back the results
@Jojo Tully Music haven't got the proper 3M ink but by experimentation I think I found the trick to do it properly. You must use not the first "squirt" of the pen but let the ink flow and then start your trace (like painting with a spraypaint can). Also letting it cure for days before touching it helps a lot
I always remove super glue with - super glue :P This sounds stupid, but the solvents in the fresh super glue make the dry glue come off again most of the time. You just have to be quick at wiping it off before it hardens :)
I use blu-tac to remove blu-tac so this makes sense.
"Wiping it off... _again_," Emeraldy? When did you wipe it off the first time?
You put the fresh super glue on the hard glue, wait until the solvents make the old one liquid again and wipe it off quick to make sure it doesn't harden again ^^ Note - This doesn't work with all glues.
Well then see, Emeraldy, you're not wiping it off again; just the _first time_.
your german is terrible.... you realize that most of the world doesnt speak english natively.... that maybe, just maybe you are the ignorant one here.... in real life....
The MT-240 was my first keyboard, you just gave me a serious nostalgia trip. Thank you.
I can confirm, the MT-240's black keys were bonded to the white keys at the factory. I took one apart in the early 90s to repair some broken black keys and noted the same thing.
The keyboard was a gift and I was only a teenager, so I couldn't afford anything that would work with the MIDI interface. I've always been curious about something: how many instruments is the keyboard capable of playing if you use it as a MIDI output device? I remember being able to access some instruments that weren't normally available from the front panel, by momentarily shorting pins together on the large, square IC on the logic board.
I love your restoration videos on both this channel and your main channel. They are therapeutic!
I'd try heating the glue up with a hair blower and scraping the top residue off then alcohol again?
I had the Casio MT-240 back in the early 90s and used it a LOT on my Atari ST/STe computers. I used to looooove the way they sounded and it was a pretty affordable way to get MIDI back then. I don't know what ever happened to it and I regret not still having that keyboard with me despite all the other things I've managed to keep. I recently picked up another one and I especially love that demo song ("Night Birds" by Shakatak, 1982). Excellent version of it! In any case, the new keyboard seems to be in generally good condition but that 9v power supply connector is loose on the new MT-240 and I seem to remember that it was ALWAYS loose even in my old one back in the day. GREAT keyboard--I remember wishing it had general MIDI back as a kid but it was still fantastic!
I have a 260 that I picked up at a junk store for $10. The piano sound is beautiful on it, whatever stereo chorus effect they use is great, and it makes a great MIDI controller for trying out VSTs.
"Yea, i dont use a knife cause im afraid of the plastic getting torn up" as he proceeds to cut TOWARDS HIMSELF.
"What's more valuable to me: this 35-year-old keyboard surface, or my 35-year-old hand...."
That corrosion was probably from the leaky battery. It would explain the mark on the rubber membrane and the eaten-through track on the PCB. I'm guessing the keyboard was stored upside down for some years in that state.
Yeah that was what I was going to blame as well.
Yep you can always tell because copper dissolves into a green residue.
@@EternityofNight - copper oxide. In the olden days they called that green residue "verdigris".
Gotta love these tear down videos. I really enjoy seeing how this old tech worked. I've always loved piano music and these videos are truly awesome to watch.
thanks for sharing your knowledge. I've been able to clean a few old keyboards I've found on Craigslist because of your example, and it was you who turned me on to the Yamaha PSS series, which has become one of my favorites. You rock!
12:00 I learned that the hard way. Once, I accidentally spilled a little super glue on my laptop (which I'm using to type this comment). I used acetone to remove the super glue, but it also left a white spot on the screen bezel (that's where I spilled the super glue).
Note to everyone: Be careful with the rubber domes for the buttons on keyboards of any kind as the are coated with a conductive coating that allows them to complete the circuit when making contact with the copper trace on the board allowing the circuit to be completed, over time that coating can where away making them not work at all, so be careful if you try to clean them.
Just wanted to say that I love your videos! They are informative and fun to watch all at the same time! Keep up the great work!
Another great episode, I'm always impressed by how patient you are in cleaning and repairing these keyboards.
And your little demo of the "Synth Reed" instrument just made me reinstall "Space Quest" on my computer ;-)
I don't know what it is but that Synth Reed Sounded Amazing.
This keyboard actually has more tones than you think. The button that's labeled "210 SOUND TONE SOUND BANK" lets you pick two tones from the tone selection area and combine them. So, for instance, you can combine the chorus and the accordion to get a unique sound. But you can only combine a tone from the top with a tone on the bottom. That'll give you a very wide range of tones to pick from and play around with.
I'm familiar with how the tone mixing works.. but I still think it is a cheating way to claim more sounds than it really has.
I think you meant Yamaha PSS-380 ;)
Scarecrow Scarves Studios the same thing works with e.g. the CT-637 (which I have).
From Gwendoline Leong channel
Hi do you know how to "on" the keyboards? My Casio CTK495 works fine the Tone/Rhythm/Song bank. Just the keyboards.have no sound whatsoever. Maybe just a wire loose? Plug? What possibilities can you think of?
You offer a wealth of insight into the construction of Casio keyboards. about a year ago a friend donated a ctk-651 to me. The CTK series are probably a step up from the MT series. But they still don't offer the quality of sound that's inherent in the WK series. I have had issues recently with keys playing either softer or louder than others and also with the DC input jack. The friend who I mentioned earlier is willing to donate his WK series to me 4 loan. So I'm glad that I found your video when I did. I'll have to become used to doing my own maintenance to keep up what I have. Thx 4 posting
I love these cleanup videos.Very satisfying and giving old keys a bit of the respect they long lost.
The new theme song is awesome!
You can buy conductive coating remote key pad repair kit (check eBay) to get those non-working keys to work. It worked fine with my old Roland D-20 synth.
At your local auto parts store, rear-window defrost repair paint. I've seen it used to repair an Atari 130XE keyboard.
Love this. I have one that I bought new when they first came out. You definitely hit the best sounds on the thing. Having a decent piano made it a very useful and inexpensive module back then.
Awesome repair job. It's really cool how you were able to get all those buttons functioning again! :D
Hey i wanted to ask something: Can you put the song name of the samples that you play in the corner or somewhere like that in your next video? I really like the samples and i would love to know the names of them.
I would also appreciate this.
Is the "request a song" still on? I'd love to hear your rendezvous of the Lotus Turbo Challenge II main theme (the Amiga version) in a keyboard of your choice.
Very instructive and inspiring videos. Thank you!
The song I hear you play the most is Spelunker on NES that song is pretty inspiring I love it
The first was Fur Elise, Then Harry Potter Theme, And two others
Corvin u
Third one is title music from Space Quest III.
I can't say how delighted I was when I heard the Space Quest theme as your synth reed sample.
I had that keyboard as a kid. One cool and surprising feature I found by mistake is that there are additional sounds that are only accessible via MIDI. Using a computer and a MIDI sequencer allowed me to discover the additional sounds. Yes, there is only 20 actual sound banks out of the box, but with the additional MIDI banks there are at least 20 additional sounds, (40 in total) with MIDI access.
10:20 space quest ftw
My Favorite: Also on Use your Gameboy as a MIDI Istrument
"Alcohol is my number one first line treatment for stuff like this." That's what I always think! ;)
These videos are so unbelievably satisfying
8-Bit Keys Congratz on 320 Patreon supporters!
FYI, the plastic 'stalk' you refer to is called a _boss_. M-W defines boss as 'a protuberant part or body'.
Thanks, I always love to learn the technical terms for little things like those.
Maybe Imid's _boss_ told him to say that, Sean.
I guess it broke like a boss.
@@SMAAAASHTV xD
I personally own this keyboard and I love it because it's super cheesy but you can make some crazy sounds with it if you mix the instruments and mess with the midi, auto accomp., etc... My 210 sound bank thingy works perfectly with both the top and bottom sound banks and even though it's missing the F#0 and F#1 keys (0,1 i assume is the octave not sure if it goes as low as an 88 key).. Anyway I heard that through midi you can access "hidden" sounds like fantasy and some others but for the life of me every time I look for any information on these in depth features I can't find jack squat. The internet is flooded with circuit bending tutorials on this but I don't own a soldering Iron and I don't feel like spending a gajillion hours bending this thing. I checked the manual and it hints at these features but doesn't really explain how to use them. I was hoping that you or perhaps one of the other followers could shed some light on the more intricate operations of this keyboard. I've seen all your videos and it's inspired me to try making music by rigging up these vintage toy midi keys with my more professional Korg poly 800 (circa 80's) as well as modern synths like the Korg volca keys or VSTs in Ableton. Also THIS CHANNEL ROCKS! I've always loved these cheesy keys and it's nice to see that there is a community of people who do to. Keep it up!
I have this keyboard and I use it with maschine. I accessed those hidden sounds by going from midi out of maschine to the midi in on the keyboard. In the maschine software I set up a macro and added a page for midi program change. The extra sounds are on program numbers 20-29.
This video hit my nostalgia button. My sister got this exact model for Christmas one year. I learned to play piano on it.
Great video, and it's too bad about the superglue.
I have a Casio MT400V, and I don't know what year it was made. Buying that keyboard though was what made me start watching more of your videos though, so thanks for the journey!
The Casio MT 240 actually got 10 additional hidden sounds you can select using program change over MIDI. It is also 3 channel multi timbral over MIDI so you can hook it up to a sequencer and play different sounds simultaneously over different MIDI channels.
I'm guessing the glue was to keep the stickers from peeling, back when I was in school I had a keyboard and wrote the notes on the keys to tell me which was which.
another great video, i really love the "restoration" series!
8-bit, I love your channel and the attention and care you show these instruments despite their humble origins and sometimes humdrum sounds. These aren't going to be around forever -- unless someone takes the care you do. Thanks. I think by treating them with respect you elevate "the game" (collecting, playing music, restoring instuments)!
What about a "Space Quest III" Intro song cover with the MT 240?
I'd really like to hear that!
Brilliant series. Are you planning on making anything on CZ models?
I featured a CZ-1000 in a recent episode. I'm planning to show it again.
Oooh ok my bad.
i like the new intro music.
Huhh... All it is, Gabe, is just a heightened version of the original. Not really new except that change in octave.
I can't find the CZ-1000 video.
Another Great video and review. Glad you could use that keyboard.
I listened to the Synth Reed portion about 20 times. That tone is the best!
Loved it as always.
Is it possible to "upgrade" a monophonic keyboard to a polyphonic one? Like some of the those early white Casio toy keyboards like PT-80?
Not without some serious engineering.
By the time you were done, you might as well have built your own synthesizer from scratch! What you COULD do though, is use the keys and switches to trigger a polyphonic synth built around a suitably beefy microcontroller, and stuff it in the case! All the "magic" happens in the program code and the actual wiring side of things is pretty easy.
Yes, put the motherboard on the polyphonic keyboard in the monophonic's case et voilà 😂😂
goo off and superglue remover, you need these
yeah i am never sure why he doesn't use goo gone on any of his things. only negative i have ever dealt with is trying to mop up all the residue as it is a slight pain to clean up after
I like how this channel started off being keyboards but turned into a showcase for all types of old electronic instruments from the 70s to mid 90s including drum machines, gaming tracker interfaces and tape decks now as well.
8-Bit Audio Tech a more fitting name now.
"Garden Sprayer" Classic right there, Love the videos! :)
10:22 What song is this? I've heard it practically everywhere in your videos and I haven't figured out what it was.
Toadlover404 same question :/
Toadlover404 Spelunker!
@@draketungsten74 Thanks a lot :)
10:23 song name?
Nice! Love these restoration videos.
Great restoration project. Thanks for your video!
You can stack two sounds so there really is 210 sounds possible.
yeah, but lots of keyboards can do that.. where do you draw the line on the marketing? So my Yamaha keyboard with 128 sounds and dual-voice mode should be advertised as 16,384 sounds?
Now it doesn't mean much. At the time this came out, when I bought mine, it was a big deal.
Many of the dual-layer sounds work very well. :)
People were probably more gullible and easier to fool back then.
8-Bit Keys Actually, it's 8,256 (to eliminate duplicates).
you should try a flame thrower! ;)
I was thinking dynamite but your idea is better
What about it, John?
I suggest we nuke the site from orbit - only way to be sure.
when all of these fail, i prefer thermonuclear bomb
yea but that would also melt the plastic :(
Great restoration job the sound was really nice.
I am amazed at your patience.
I'd use a super fine grit sandpaper to remover the Uber glue.
use WD-40 for the super glue.
i doubt it works
@@antihumor2231 it DOES work :)
Dave has graced us with _another_ keyboard teardown video? Oh, god be praised!
Just discovered your channel. Great stuff man, keep up the good work!
Try lard (pig fat) on that superglue. Can't damage plastic and it's really cheap but need hour or two to work it's magic.
I was gonna say petroleum jelly or vegetable oil. But, the lard makes a lot of sense!!!
Pig fat dissolves strange hard to remove things easily. I spilled magenta inkjet liquid on my hands once, and tried everything to get the junk off. Rubbing alcohol, acetone, lighter fluid (naphthalene), but nothing worked. Then, while trimming fat off some pork for my sandwich the next day, much to my surprise the fat turned pink and faded the dye. Needless to say, I greased my hands, then used alcohol to degrease. Worked like a charm.
Andy Merrett
LOL I cut off or discarded the bits of meat that turned pink. Only a tiny bit did though, as I discovered near immediately. I know that magenta ink isn't completely non toxic.
But I did use most of the fat to finish cleaning my hands. XDDD
*P i G F a T*
invent a super glue removal lazer
preferably an 8-bit one
& Knuckles
Wow, what a good job done on this keyboard!
Is it weird that I enjoy just watching him clean things....
Y don't keyboard vibraphones ever sound like real vibraphones?
Max Kellen they can't make a real vibraphone sound. Newer keyboards use samples of real vibraphones.
Because everything in synths are either generated by basic waveform (older analogue) or samples (PCM) on newer gear. The complextities of analoge instruments, voices etc, are composed of many different components that needs to be either generated (poorly with older gear and with better luck these days Rolands COSM system for instance) or have to be multisampled on many levels to recreate as much as possible of all the nuances that create the sounds of for instance a vibraphone or a piano.
When you hit a piano string with the hammer or a mallet instrument with different types of hammers, the sounds differ greatly. From soft, mellow sounds of the soft filt hammers to the crisp clunk of a wooden or plastic hammer. Then you have resonance within the instrument. The nearest strings will always resonate and create upper harmonies depending on how much they're dampened or open. Same thing with a vibraphone that's open, it will have a different sustained sound because the other mallet bars will resonate with it. Then you have ambience of the room and other instruments or just the room itself that plays a factor.
You'll never be able to recreate 100% any analogue instrument synthetically, but we're getting pretty close. And nowadays instruments sound near perfect for most purposes. The older gear that David is showing will always be limited to their era in both sample memory, method of sound generation and such. Just the way it is. :)
lol thanks for putting so much effort into the answer
I hate to be "that guy" but you're not playing the Harry Potter theme correctly. The last few notes are all wrong.
Isn't it Tchaikovsky who composed the original music on which Harry Potter's theme is based?
GaryKildall It's an original theme by John Williams, so... no? Maybe you're thinking of the Dance of the Sugarplum Fairy?
Sporkaganza I know the sugar plum fairy. Didn't know Harry Potter was not from Tchaikovsky.
Lol shut up
I don't think he was playing Harry Potter in Synth Ensemble.
I have a soft spot for this keyboard. I had one as a kid and had hours of fun mixing the tones. Great little keyboard for the money at the time.
I watched all your repair and restore vids! Do more!
Hello Sir, I have just found your computer channel as well as this. I have very much enjoyed your presentations.
Regarding the MT240 - many memories as it was my 1st midi keyboard. I used it with a program called Lyra on my Color Computer to create accompaniment tracks for students.
While you can only play the sounds on available on the instrument, when hooked up to a midi composer one could access the full range of 210 sounds so much like the roland mt32 it could be used as a sound module.
Thanks for all your excellent work!
I don't even like these old computers (your other channel) and keyboards, but I enjoy your approach and ethic and knowledge and thoroughness in regard to repair.
I love all your videos on both channnel's keep up the good content!
I was waiting for this one.
Nice work on the keyboard! I'm amazed at how good this keyboard sounds. Some really neat sounds in there. Nice job on the button hack. Next time, you could consider using conductive paint when solder won't stick. You can use an automotive defroster repair kit or there's several solvent and water-based conductive paints out there these days. I feel pretty certain this would have solved the corroded trace issue. Also, another thing to try on the super glue is mineral oil (available at pharmacies), or motor oil, etc. It shouldn't harm the plastic and just might soften up the super glue enough to scrape it off.
Finally, I'm really liking the new intro :) Keep up the good work.
I had one of these too! I heard one in a music shop in Bath and liked the piano sound - a few months later I got one and used it connected to my Atari STFM (which had built-in MIDI ports).
I still have it, though I haven’t used it in a while.
Awesome channel, I really appreciate the videos.
about the leftover glue residue, you can try sanding it off with automotive grade sand paper (1000 grit above, higher grits will bring back the sheen after a bit of buffing with cotton), 3M sanding pads of high grit numbers can also do the trick. if you're worried about the plastic shine being fogged over the surrounding area due to the sanding, try applying some pledge floor care with a Q-tip to bring back the shine a bit.
Great content as always
Nice memories! I've got the MT-240 in my childhood. Now is in the hands of my brother, still working fine. One clarification, you say it has 20 instruments, and 210 "combinations". In reality it has not 20, but 30 real / direct instruments. The problem is that you can't access those instruments (21-30) via the buttons in the keyborad (AFAIK).
How can you play with those instruments? programing via MIDI comands of course. Use a controler (or PC) via the midi IN port. In the controller, using bank 1, change the patch (1-20) to get que standart instruments. Use the patch 21-30 to get the extra included instruments. You can play the instrument via the controller or the piano keys!
Whoa, the piano sounds super awesome.
Excellent videos, keep them coming please!
i always see ur video to only see u play (and sometimes see how u restore it) 😂
the songs u play are very enjoyable and quite hypnotizing
i have one! thank you for showing the disassembling process, I'm gonna do it now!
I dont even care for keyboards but just love repairing videos like this one and the ones you did on your other channel :D
That button bypass was pretty ingenious, specially if you're just going to use the output on the back to run it through a mixer or another recording device.
Ahh memories...Used two of these midi'd to my Amiga 500, endless fun throughout the 1980' and 90's ! great Casio sounds, especially when layered (you can layer two !). if i remember correctly, select the first tone, then select the mutli/split and then select the second tone.Eg strings and piano. This is where they get the 210 sounds claim from.
8:44 All parts together (mens DAYS of hard and detailed work!). Cheers from Argentina David!
Hi I enjoy watching your videos, they are both informative and helpful.
I have recently acquired a Yamaha PSR-185, from a deceased close friend, this thing is nearly 20 years old, it works but the volume slider is scratchy, only one loudspeaker works and some of the keys have to be struck hard to make a sound, this instrument is sentimental to me, as we used to play on it when we were young and I'm really afraid to take it apart and clean it, in case it breaks.
Many thanks
Hey man, I love your videos! I have a Casio PT-100 and a Yamaha PSS-270, bought em each for under $10, and cleaned em both up, they look like brand new! The only issues I had cleaning up the Yamaha, were the tiny tiny ball bearings in the sliders, and reassembling the keyboard (as i took the whole damn thing apart XD), Goo be gone was my best friend, as the original owner put large stickers on each key, even putting stickers on those stickers!? But 8 hours of reverse engineering later, I got both up and running in tip top shape, and funny enough I now use them for my tunes, I love the FM synthesis on the PSS-270. It's like a baby DX-7.
Damn, this thing sounds better than I thought it would. Especially that piano.
I have this one and have circuit bent it many times. Same reproducable bend. The battery left inside the keyboard issue is always an issue with me too! Almost every board I have bought or found in flea markets and pawnshops,ebay and so on, had batteries left inside to leak or make the board too heavy for reasonable shipping costs. This keyboard was my FIRST ever keyboard purchase with my first ever paycheck at 14 years old back in 1989! It cost $142 in K-mart in Puerto Rico and was my first video recorded keyboard as well!
Excellent video!
Bravo! Envious of your skill-set and talent.
I have this exact model of keyboard that I rescued from a flood a year ago. It was literally floating like a boat and it was completely covered in mud. Gallons of water and lots of scrubbing was required to get it clean. And after that, the thing turned on and was perfectly functional. Unfurtunately, a month after, it just stopped working! I think it was the moisture that damaged some chip or inductor...
Yikes, this looked like a headache! Great video as always Dave!
You rock on the keyboard. Very talented.
I HAVE THIS KEYBOARD! fully working and still in its Case too.
Just wanted you to know that these videos are mint even though I don't even know how to play the keyboard or any other instrument. Oh and I just became a patreon!