HOW TO UPGRADE YOUR CHEVY COLORADO LED HEADLIGHTS - LASFIT
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Follow me on Instagram: / matt.1003
LED LIGHTS LIST! 👇
10% off WITH THE CODE :MATT&LASFIT💡
COLORADO LOW BEAMS: bit.ly/2MEiG9x
COLORADO HIGH BEAMS: bit.ly/2MxQJQl
COLORADO REVERSE LIGHT : bit.ly/33Qj2z5
CORVETTE Reverse light: bit.ly/2ZgFlyn
LICENSE PLATE AND MAP LIGHT CORVETTE: bit.ly/2KMMLS2
CORVETTE TURN SIGNAL: bit.ly/2NotnfF
CORVETTE FOG LIGHTS : bit.ly/2NmeryC
🔽Everything I bought for my 2017 Colorado🔽:
Parts:
Led Tail light: amzn.to/2Yuye12
Led Third brake light: amzn.to/2LNFi6I
Envision Shift Knob: Part # 23286909 (www.gmpartsdir...)
Rough County 6” Lift Kit: amzn.to/2UOfGeY
Rough Country Leveling Kit: amzn.to/2VHeda7
Exhaust Tip : amzn.to/2ZHUZAk (Make sure it is the size you want).
Stubby Antena: amzn.to/2GejTi3
Light bar: amzn.to/2BKhVV7
Iphone mount: www.proclipusa...
LED lights: amzn.to/2DNHx3G
Bison Colorado Front Grill: www.shopchevyp...
Bed Lights: amzn.to/2tqvzYO
Third Break light/Bed light: amzn.to/2EgoHDS
Cold Air Intake: amzn.to/2EfSufU
Break Calipers Kit : amzn.to/2WoxrNP (Make sure to pick your color)
Lug Nuts Kit : amzn.to/2I3ICrn
Tools:
Car/truck trim tools: amzn.to/2vPOWMo
Drill Extension: amzn.to/2V1S6vh
Funnel: amzn.to/2UsYsQf
Gloves: amzn.to/2NU29M6
24 MM Socket: amzn.to/2UsQO8l
Socket Extension: amzn.to/2NTcEzB
15 MM Socket: amzn.to/2UxWXjS
Black Vinyl : amzn.to/2HRaNdj
Heat Gun: amzn.to/2JDZGXK
Vinyl Install kit :amzn.to/2TtV9a0
Oil change kit :
Oil 5w30 - 5 Quarts - amzn.to/2NQAKLj
Oil 5w30 - 1 Quart - amzn.to/2UrXsM1
Oil Filter 2017-2019 - amzn.to/2WTDBqa
Drain Container - amzn.to/2SSTiLO
Disclaimer:
Due to factors beyond the control of MattysGarage, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of MattysGarage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MattysGarage.
I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
Category
Autos & Vehicles
#CHEVYCOLORADO #LIGHTBAR #CHEVYTRUCKS
DON'T FORGET TO USE THE COUPON TO UPGRADE YOURS! 10% OFF BABY!
I’m looking at your video because I want to change my LED lighting, but I also noticed that you mention that when the highbeams are on the fog lights turned off how can I have my highbeams and fog lights on at the same time?
I’m on my second set of my lasfit... on my Chevy Colorado. It’s great. Don’t run them during the day. I literally ran them day and night and the first set only lasted me a year and 10 days. So I have a habit of getting in the truck and automatically turning off my lights during the day time. These lights are bright. When I say bright I mean bright. Some people think I have my high beams on and get mad. Good product.
100% agreed!! Thanks man!
What about the side yellow light next to the low beam. On the front side.What should i install?
Lookin' good, Matt! Gotta love matching LEDs! 👍👍
Tks buddy!!
Just got my 2021 ZR2 upgraded bulbs. Saved with the code!
Nice buddy!! Happy for yoy
I've been using Lasfit LEDs for the last couple years now. Great quality at an amazing price! I won't buy any other brand again. I live in Minnesota and they didn't miss a beat at -40° below this winter and ran cool at 110°+ in the summer. I highly recommend them to anyone
Good to hear it man!
I love your Colorado videos man. It’s been a great guide for me. I just bought a 2019 Colorado LT a few weeks ago and I’m itching to mod it man! You and Horse Power Obsessed are great!
Do the stock dust caps work with the Lasfit LED's?
Yes
i had 4 sets of diode dynamics low beams each time poor workmanship i just switched to lasfit i hope they are built better
Please give me part # I went in website and was confusing 2018 Colorado ZR2..
How are your lasfit led's holding up, i just bought the high , low, and the switchback turn signal. Your discount still works. love the channel
I'd like to see you put the socket covers on for all of these bulbs. This is a known issue for LED upgrades to this vehicle, I have learned the hard way.
Hey man what was the issue.. my backup camera has failed black screen on and off when I’m in reserve. My dealer is blaming the after market led bulbs I swapped
You should get in contact with diode Dynamics their LEDs have a 3 year warranty. Have them replace it and keep them as backups.
Yes... I will do it ...
Great review, did I miss it? What is the part number for the LED fog light swap?
That exhaust resonator delete is sounding really good. That's definitely my next mod.
Love the content!!
Thank you man! I appreciate your support!
You made an improvement as usual.ive watched you throughout this yr make alot of small improvements that have added up to a better looking truck than you could have bought from gm.
Thank you man! Much more to come!
Had all LED lights but the high beam. Just ordered the lasfit with your code
Nice man! Glad you took advantage of it!
Does the factory dust caps fit over the new LED’s?? The light output looks really good!!
They should! Fit for me
Just installed the LD H11 Switchback my dust caps don't fit back on.
Yes, had the same problem. It’s not a good idea to leave them off either. Have an email in to the company for a refund.!!
Hey man. What bulbs do I use for the switchbacks. Sorry for the Noob question. haha
Cool stuff matt👍😎
Thank you!
How was the fit with the dustcaps on both the low and high beams? Or did you not put the dustcaps back? On the Diode Dynamics the cover can still be on..
Yes the dust cap are back on! They fit perfect ....
What do you think about bug deflectors. Yes or no
Do you leave the caps off after installation?
Does the LED unit get hot enough to melt the wiring I stuffed under the dust cap!!??!? Just curious...
I am
considering in joining the party with my first new Truck, I want to add fog
lights but not through the dealer as it is much more expensive, My question is
does the WT come pre-wired for this add on, if not what harness will I have to
purchase and is it plug and play or do I have to take it in to the dealer to
have it programmed?
When I try to buy the LEDs on Amazon it says they don't fit the 2021 Colorado. If someone could just tell me what to buy that would be great.
New video about it tonight! Make sure to press the 🔔 for notifications when the video is live! 6pm eastern time
Great video
Thank you sir!
Do you know when the low beams will be back in stock
Not sure! I will reach out to them and try to figure out
Are you able to put the dust cover back on ?
Were you able to put the dust cover back on with Lasfit Leds?
Yes sir!
Matty, I’m with Jaime, my dust cover would not fit over my low beams. Lasfit said there is no way to get the dust cover back on over the low beams because the fan adds too much length,how did you do it?
@@edperry1141 same here... Lasfit told me to use the LA series , those will work with dust covers. So ordered them and sending the LS back.
Jaime Campos they are sending me the LA low beams to try out. They said they are less powerful than the LS LEDs, I’ll try them and see how it goes...
@@edperry1141 I just put on the LA series on my truck and i was having a hard time putting back on the dust cover. It only secured on a few sides. I dont think the dust cover can go back on normally
Good info!
Thank you!
How do fix the issue , where the fog lights and hi beams both turn ON?
Great Review thank you 👍🇺🇸
The Vermonter
Thank you!
Hi Matt so with the gray led it’s okay to leave the dust cap off?
Curious how long do the leds last. Seems like from some of the other people doing videos on leds they may not last very long. You seem to have problems with the ones you replaced. Good video
I will definitely keep you guys updated on that!!
@@Matty.Garage 👀 did they last?👀
Love the truck! How ya like the lift kit? Getting any noises out of it going up bumps or pot holes lol. I need LEDS, are you able to put the dust covers back on after these?!
The lift is great so far ... no issues at all... having a great time with it ! And yes ... the caps are back on!
How are they holding up almost a year later?
What is part number for low beam Lasfit leds? Link does not work
So those lights come with the resistors? Or you have to pay extra?
Your link for the low beams don’t work. What are the model and size of these bulbs?
Check my latest video... on the description
What’s your switchback link? I didn’t see it above
Diode Dynamcis
Alright. Did your truck come with projectors or did you add them?
Alright. Did your truck come with projectors or did you add them?
Alright. Did your truck come with projectors or did you add them?
what happens with the drl?
What model low beams did you go with? Seems to be many different options on there website?
Use the one from the link...
Hi where can I buy these?
Thanks
Check my lasted video ... there is a link on the description
What exhaust are you running?
Stock... with the resonator deleted
How many lumens do the low beams put out?
This is a good question I will check and let you know
nice truck but it's only a 6 out of 10... Why? Because you still have you spare tire underneath the truck. come on bro take it down...
You are 100% right ... Im lazy... we will get it done!!
Matt does the the dust covers still fit back on over the Lasfit lights?
Hey Matty, may i ask why you switched to Lasfit LED s? I had watched your previous video with another brand. Which do you prefer for headlights?
Hey man! They are better ... at least for me ... they are brighter for sure ... and the customer service was way better ... at least for me
@@Matty.Garage thanks Man
Hey Matty did your stock dust cover caps fit over the LS Plus LED bulb ( Linked above)? I ordered and tried to install but it wouldn't fit with caps on. Am i doing something wrong here?
I just had the same problem....we see if I get a refund...don’t want to leave the dust cap off!