Thanks Ian. My fork cartridge kit is coming next week, and the instruction book is a little vague. This video is a great help to me and should make the installation straightforward. I can't wait to get it fitted and set up ready for my spring adventures. Kind regards Dave.
@@justsomedude445 Yes I have. Only on the road so far. Very happy with the improvement over bumpy roads. And the fork dive under hard breaking is much improved. I should imagine that the improvement on dirt roads would be equally worthwhile. Especially if you are a competent rider. 😉
@@davepyer i ordered both ends , extreme rear shock & extreme drop in units for the forks few days ago after a week of agonizing deliberation , diff bike but same product , hope it turns out worth the $$ , Thank you for your response i feel better about the decision
The spacers set the spring base preload and should be re-installed in the same order as when they are shipped to you. On our bike we used one below the spring and 3 above.
After you draw the fluid out of the forks to the level that shows to be from the top it seems to need no more than 3 fluid ounces per fork with this upgrade, maybe because of the thicker cartridges taking up the space compared to the stock ones?
Yes, since this cartridge is 'closed' the fork oil you are pouring in is only there to lubricate the slider bushings and operate the bottom out cup at the top of the cartridge. All the damping is controlled inside the cartridge with oil that is much thinner and under nitrogen pressure. I assume "per fork leg" was a typo as this install only makes changes to one fork leg on the F850 models.
You can hold the end of the cartridge rod and gently put some sideways pressure on it. If that doesn't work, reassemble the fork to apply spring pressure and try hitting the bolt with an impact gun to loosen it.
@@TouratechUSA thanks for the reply. I tried reassembling it and even compressed the fork leg but it didn't seem to add any resistance... I can try flexing the cartridge to the side though
Thanks Ian.
My fork cartridge kit is coming next week, and the instruction book is a little vague.
This video is a great help to me and should make the installation straightforward.
I can't wait to get it fitted and set up ready for my spring adventures.
Kind regards
Dave.
have you ridden the bike with the new units yet ???
@@justsomedude445 Yes I have. Only on the road so far. Very happy with the improvement over bumpy roads. And the fork dive under hard breaking is much improved. I should imagine that the improvement on dirt roads would be equally worthwhile. Especially if you are a competent rider. 😉
@@davepyer i ordered both ends , extreme rear shock & extreme drop in units for the forks few days ago after a week of agonizing deliberation , diff bike but same product , hope it turns out worth the $$ , Thank you for your response i feel better about the decision
Thanks for this video, very helpful. QUESTION: How many spacers did you use at the top of the spring and how many were in the cap? THANKS!
The spacers set the spring base preload and should be re-installed in the same order as when they are shipped to you. On our bike we used one below the spring and 3 above.
@@TouratechUSA thanks so much I really appreciate the reply
@@MotoTravelUSA you shouldn’t have to ask the damned question.
@@robertlee8042 You mad bro?
Ps. WHAT WEBSITE. YOU HAVE MORE THAN ONE ANS NONE HAS TUNING INSTRUCTIONS.
After you draw the fluid out of the forks to the level that shows to be from the top it seems to need no more than 3 fluid ounces per fork with this upgrade, maybe because of the thicker cartridges taking up the space compared to the stock ones?
Yes, since this cartridge is 'closed' the fork oil you are pouring in is only there to lubricate the slider bushings and operate the bottom out cup at the top of the cartridge. All the damping is controlled inside the cartridge with oil that is much thinner and under nitrogen pressure.
I assume "per fork leg" was a typo as this install only makes changes to one fork leg on the F850 models.
The video title says these fit the 750gs but in the video it only mentions 850gs and 850gsa. Can you confirm if it fits 750gs also?
Thanks for asking. These do NOT fit the F750GS so I have corrected the title.
Hello. Is the lower suspension shelf also tightened to 19Nm. Thank you and best regards
Yes, 19nm for both the upper and lower triple clamps.
The lower bolt on my fork just spins and won't brake loose from the cartridge. Any idea how to hold the cartridge to unthread the bolt?
You can hold the end of the cartridge rod and gently put some sideways pressure on it. If that doesn't work, reassemble the fork to apply spring pressure and try hitting the bolt with an impact gun to loosen it.
@@TouratechUSA thanks for the reply. I tried reassembling it and even compressed the fork leg but it didn't seem to add any resistance... I can try flexing the cartridge to the side though
where can i buy the kit
I can't find it on the touretech website in eu
I'm not sure why they wouldn't show on the website. You should email your distributor directly.
Swing arm
Tulatech
Where can I buy white stickers?
In the USA use this link: www.touratech-usa.com/store/tt-logo-stickers
Ok. Installation complete. Now, the important stuff. Adjusting. Installation is pointless without tuning.