This is actually too nice and interesting too... great experiment and thank you so much.. Can i do this for final year ece project, some one please reply me.. 😌
@@PeteTheFatDog no need cuz it only need to know how it works and where to put the things up. And thanks for the advice even it does not apply to me....
Your video tutorial is excellent, I seen some people's are asking how to open from inside, that's very simple ( u can put one direct connection through switch to locker). Many of them not understand this is just example...
Best video written description and simply understand able video . Like your video so much I have been on u tube so much time but your video so are so inspiring easy to creat for some one for make stuff . Thanks
Admin,please answer me. I got project in my school and i use your nice idea. And i bought the fingerprint sensor but , when i got the pin jumper to arduino uno R3, the fingerprint do not blink. that was current that shock and blink for a while. that just blue blinking for second and dark. What to do? Please admin,or i will get F gred for my project.
Wait. It operates only as long as the finger is on scanner. As soon as you take your finger away, it shuts. Means no time for conveyance. That's undesirable.
maybe you could design a version which sits over an existing deadbolt? that way when your finger print is entered it toggles the dead bolt since it’ll be more secure
Bro I ordered another fingerprint sensor with 6 wires it has yellow and blue extra and I need help as when I tried to program it it didn’t light up .cause I didn’t add the 2 extra wires. Can you like tell me where to put the extra ones
holes drilled way too big also. The screws practically fell into the pre-drilled holes. sheesh also looks like you have some major corrosion on the battery terminal at 3:14 ..... probably should invest in another 10 cent 9v terminal
1. The solenoid mechanism has spring, you just have to push the door get locked by aligning the solenoid, 2. To open from inside, just put a push button and add instructions for that or setup a manual lock
so lemme get this straight they are attaching a $50 sensor with hot glue!!!!! what a time to be alive
thank you so much for all the likes
Hello. Friend
Vixia Gamer just joking
you know many of your consumer electronic components are attached with hot glue right?
max paul
@@elkou5414 lol, nope. Screws and adhesive but no hot glue.
if you will open the door by biometric lock and close the door so, how you will open the door again??
we need one more sensor for it
Hahaha
Wait i know the answer to this .... climb out the window and voila your outside and can access the sensor..
that's an easy fix, just use your left finger and stick it up your chocolate factory
Sey to doorr: open dor and dor wil opene. Sory mi inglish no god
Nice design, works well and very easy to set up.
Will it work if we use mobile phone rather than a laptop??
This is actually too nice and interesting too... great experiment and thank you so much.. Can i do this for final year ece project, some one please reply me.. 😌
May we help you?
Hey there Angelic can you prpvide me your linkedin id as even i have this project as my be project.
All of your projects are awesome, quite easy to understand...
Plz tell me how include code
Proud of you bro you're Indian.
it worries me when people make relatively complicated things, but they have no idea what a woodscrew is.
And i think you cant do anything like that either 🙄🙄🙄
@@IndianYouThoober90 your hot memes are three years too late pal.
@@PeteTheFatDog its not hard then
@@IndianYouThoober90 it's OK pal, there are pills for that nowadays. Consult a doctor.
@@PeteTheFatDog no need cuz it only need to know how it works and where to put the things up. And thanks for the advice even it does not apply to me....
Mai tooh aapka fan ho gya.....thanku for this vedio and aapke sabse ache baat ki aap yah v baata dete ho ki saman kaha mile gaa....☺☺☺☺
Ur videos are very neat and precise..👏👌
Nani ns true
Thank you...for watching our video...
th-cam.com/video/H29hSILyARU/w-d-xo.html
@@CreativityBuzzcan I get programming?
Your video tutorial is excellent, I seen some people's are asking how to open from inside, that's very simple ( u can put one direct connection through switch to locker). Many of them not understand this is just example...
Awesome idea.. 💡
Best video written description and simply understand able video . Like your video so much I have been on u tube so much time but your video so are so inspiring easy to creat for some one for make stuff . Thanks
This code is in cpp format so, how can i put it into arduino and where to put this code.
Nothing beats the good old lock and key
Admin,please answer me.
I got project in my school and i use your nice idea.
And i bought the fingerprint sensor but ,
when i got the pin jumper to arduino uno R3,
the fingerprint do not blink.
that was current that shock and blink for a while.
that just blue blinking for second and dark.
What to do? Please admin,or i will get F gred for my project.
Can we help you?
Connect me at,
1. m.facebook.com/meemlab
2. th-cam.com/channels/cZ7nyhAKkT1sQp-Je6A9sQ.html
3. instagram.com/magician_of_electronics/
Jisko bhi ye chiye muje btao mai only 4999rs mai duga.... Whatsapp no. 7269804042
@@magicianofelectronics951 hi, i have same problem
Teach me why i should put all those wires in the places you mentioned and i will truly appreciate it.
Hey bro can you pls make a video about an amplifier?how to build it circuit?
Fabulous bro . what electronic gadgets you make
Exelente invento y voy a esperar más de ti con Arduino te mereces respeto
Realmente fucionia
Saben que librerias debemos de descargar para el uso?
@@indiancringekid3773 disculpa a mi el código me marca un error te corrió sin ningun problema a ti?
Where did you buy the transistor and the thing that you put on the battery ????
Bhai yaar Tu mest h😃😃
mest nahi best🤣🤣🤣
@@creativecreature777 best nahi mast hai vo..
Excellent project absolutely brilliant, a perfect innovative project
lets say u lock doors and battery dies? But still idea good
D3keris Almost all AIO biometric doorlocks works on batteries.
Dude the lock is held on with hot glue......... Break the door down
TechNoDime lol that’s true
Hahahaha
Adding some battery contacts to the front side should do it. If the battery even runs out you can power it using the front contacts.
No Word's To Say your Talent 👏👏👏👏👏👏Keep it up
when I look at the fingerprint scanner I think "isn't it just a high resolution mouse sensor on a bigger prism with some different ICs on it?"
Lmaooooo
Nice work👍👍👍
Great bro awesome
Sir bta de plz
Kya na TIP 122 ki jga 120 use kr skta hn
Bolts used like wood screw xD
Very Nice Bro😊👌👍
thoose arent wood screws...
Finally!
the lock which I ordered has 2 wires just like ur lock but they are connected together not seperate as shown by u . i have ordered exactly the same
Just pull them apart
Love this video thanksss
How can i get these wires that are attached to battery at 2:37 ?
It is battery connector or you can make it by using a same type dead battery
Wait. It operates only as long as the finger is on scanner. As soon as you take your finger away, it shuts. Means no time for conveyance.
That's undesirable.
You want to change coding as per your need bro.
Just add delay bro
He's just showing a prototype. You just have to make little changes in a code....to make it desirable
@@CreativityBuzz
I want to install fingerprints of other people as well. What will that take? Any software change?
No way, millis is better than delay
Are you sure for code to all you need in your project to open the solenoid 12-volt?
is there a circuit design for this project?
Very good tutorial, I will make it 😀
12v solenoid *powers it with 18v*
So unprofessional 😕
Should we use regular aurdino or smd aurdino in this project?
Make a Video On How To Insert This All On A Door 😂 You Foolish Guys
cool but I wanna ask
transistor here used as switch right?!
Even i have same question
Nice look
where is the link of the software we have to use to add fingerprint. please tell i am making it for school project
*Roses are Red 🌹*
*Sky is Blue ☁*
*I dont try this one😅*
*And neither will u😝*
You mean "neither"
*I won't be trying this*
*and neither will you*
There, fixed it for ya.
Also, jokes on you. I came here because I actually wanted to make one.
@@666HeroHero and did you? 🤔
great video dude,...,............highly appreciable .. but don't u think u should do something big major model with team.......
OK so dude i m stuck in my room!
Send Help please
👌👌👌👌👌👌
Great video, not so great comments lol.
👍👍👍👌👌👌👌
Nice
Wah bhai wah!!
Shout out
PSK TUBE
And are the wires all included with the things you have shown to buy.
Magnets can open this door lol
That's bs. If that was true someone could hack into my phone by simply placing a magnet on the sensor
magnetic loc...
Kloot Sack I hope ur kidding
Lit Papi he should be,well I hope he is.
Magnets only prevent u from unlocking, just imagine electromagnetic for pulling lock is neutralized by that magnet
Very nice Video. This is brilliant. But is there a detailed video on the coding part to enroll fingerprint?
I think adafruit should strike this vdo
Why tf?
Dude nothing is wrong
Its works!! Thanks!! No one will get in my room now except me!!
Frist
PSK TUBE
Nice bro🤓🤓🤓
If someone break this then ?!
anjana sojitra
Then we can add a tamper alarm ..
Then its broken?
What programming language you use to install the code? Can i use C++
Thor can open it easily, bad idea in practical,but best in DIY projects 👍
bro whether the code is current I am getting error in the that so pls can clarify it
I need help too
What is the solution for:
exit status 1
error compiling for board Arduino Uno
Great job bro I liked it actually please programming open close dono ki kr do to jo faltu ke comments kr rhe h vo silent ho jaye
Boss my lock is not proper work. I get the proper out in led tho can you help.me out
Sir TIP 122 TRANSISTOR ki jga TIP 120 TRANSISTOR use ho skta ha??
Is thier someone who tell me which aurdino board input 24 volt DC and out put 24 v also is thier something like that
Awesome video!
Good Day Sir. Can you provide theoretical framework/framework of that project or another project related to that project you re doing
maybe you could design a version which sits over an existing deadbolt? that way when your finger print is entered it toggles the dead bolt since it’ll be more secure
you can do this using a servo motor programming a arduino uno
Is there manual overide button on the solenoid?
No
Bro I ordered another fingerprint sensor with 6 wires it has yellow and blue extra and I need help as when I tried to program it it didn’t light up .cause I didn’t add the 2 extra wires. Can you like tell me where to put the extra ones
holes drilled way too big also. The screws practically fell into the pre-drilled holes. sheesh
also looks like you have some major corrosion on the battery terminal at 3:14 ..... probably should invest in another 10 cent 9v terminal
It's very nice. can use our family fingerprints also?
Yes.125 different fingerprint can be use.
what a machine it is ! i like it what a idea!
I made this at home and it actually works
Which company fingerprint sensor you use?
2 questions.How are you going to close the door after you open it and if so how are you going to open it again but from the other side?
1. The solenoid mechanism has spring, you just have to push the door get locked by aligning the solenoid,
2. To open from inside, just put a push button and add instructions for that or setup a manual lock
This person can make a vault for ameica. 👏👏👏
very nice video
I wanted to ask y haven't u connected a resistor in between the base of transistor and arduino pin....??
Super simply nice
Can it accommodate more than one finger print. How can I get those devices?
Excellent.but are you connected to pc with LAN Cable?
U should get 10 million subscribers
Quá ok, đã bấm đăng ký.
Can i do it with normal arduino UNO?
you can also connect it toon system to turn on of the car. I mean you can use for lock/unlock the key...
Yes
Great great great great work thanks for this one
what is the battery voltage? is it 9v or 12v?
Sir
Ye project hamko buy kana hey to kitna cost lagela
Apke pass se buy kare to
hey by the way what cable did u put behind the sensor? U have not given the link for it
It comes with sensor
We want to enter the code or it is set as default
Your video is best forever
can I use other fingerprint sensor? like AS608
hi bro this is a nice project , Which library did you use in this code?
A problem occurs when we upload the code
Adafruit_fingerprint No such file or directory.
How can i solve it please help me.
Can anyone help me how can i solve the problem mentioned above..
Have you downloaded the Adafrut library??
@@mohsinfiazkhan4131 go to manage library in Sketch tab and add the adafruit library by searching.
@@rhythms7500 whats the name of the library?
@@mohsinfiazkhan4131 Adafruit_Fingerprint_Sensor_ Library
Can you say which size is the wood in perimeter i am not getting it
looks good，do you need PCBA factory ，I can make this PCBA for you.
What materials you put in arduino? The cable wire? Please help