I can't tell you how much I appreciate these videos! As well I find a lot of woodworking TH-camrs seem to forget that people with no prior knowledge will be watching and trying to learn. I appreciate the fact that you explain everything, even the stuff that may seem obvious. 👍
I have the same Table saw and I was looking for the best possible stand for it. I have to say this was the most basic and practical one I found. I made it and it has worked wonders for me. I actually made it from scraps so I had to but some extra thought into the build but overall, this was PERFECT. Thank you Steve. You are awesome. Keep up the great work.
My girlfriend hasn’t heard me listening to one of your videos in a little while so she asked if the king of microjig was okay. You are now the microjig king according to her lol
What timing! I recently bought the same table saw. I just finished building a large workbench, and was planning to build a stand for the saw to utilize the bench as an outfeed. And then, here you are with a video for the exact setup I'm doing.
Thanks for the great video, Steve! I have been wanting to make a cart for my table saw for a while now instead of just puttign the legs on scrap blocks to match the height of my workbench. This feels like a very approachable design, unlike a lot of the fancier carts I see on TH-cam and elsewhere. I appreciate the simplicity!
Hey Steve, watching your vids in 2019. Just wanted to say I really enjoy your videos and downloaded the plan for the BMW and made it in a couple days. I'm a novice woodworker but you have been a huge help, so thank you sir for your generosity
I like the construction method of the frame. Looks super strong and like a piece of furniture with trim instead of a few pieces of plywood screwed together.
Hey, I'm glad you're back with shop projects. This cart is very useful and sturdy. Thank you for sharing. Thanks to MicroJig and Video Blocks for sponsoring the show.
I finished mine last night. Thanks for providing the excellent design and helping me get experience in my first table saw all at once. For fellow (rabbet) newbies, Steve's woodworking basics video on making boxes is an excellent companion to this. Thanks, Steve! I'm hooked!
Excellent project! I modified it to fit my vintage saw. It required a motor mount that attaches to the table rather than hang off the back of the saw, so I made the stand deeper. Rather than end up with super-deep drawers, I put a divider in the middle and made drawers in the front and back. I cut a hole in the top for the sawdust, so the top front drawer acts as a sawdust bin. I also used lap joints rather than pocket screws, and the side panels are just 1/8" hardboard. That's plenty for rigidity; the frame is plenty strong.
Awesome, I especially love the fact that you can use the BMW as an outfeed table! I will definitely make this sometime soon for my DeWALT jobsite saw. I'm glad I bought a set of 8 locking swivel casters when buying casters for the BMW :D
Thanks for the video! When I go by Woodcraft this weekend and they're out of MicroJig stuff I'll know who to blame. I'm surprised you didn't use the Ridgid to cut the panels or mention why you didn't use it.
Steve, this is just what I was looking to build, when I came across your video. The one I was thinking about did not have drawers, but now I do think it will. Big thanks.
Steve, I checked out your sponsor, Video Blocks. Looks like a great service and seems reasonably priced. I don't think I'm at a stage in my TH-cam video production where I could effectively use this service right now, but I'd love to give it a try later on - when I have more experience with filming and editing my videos. Thanks!
This cart was my first major project in my new workshop, I wanted a taller cabinet for my other tools so I am going to make two with tops at 34". I will make them linked with a wider top to make a bench/desk and the build a tool cabinet on top. Maybe I will never make anything in my workshop but things for my workshop! I shall use metal drawer runners this time around. Thanks for the plans, I tried the Sketchup file but it would not open for editing on my free Sketchup version.
I bought this table saw thanks to your recommendation I am very happy with It. But I am looking for a good explanation for what the little auxiliary fence is used for.
@@gibson_rulls4992 microjig! Maker of the grrripper makes a throat plate for older table saws built without a riving knife that has a splitter (basically a non adjustable riving knife) built in
I love this video. I was try to figure out how to arrange my wood shop. Now making my table saw mobile solved everything. I will probably make a mobile stand for the router table, scroll saw, band saw and miter saw.
General suggestion - glue a piece of sandpaper on one side of the stop block, then put that side against the fence when you clamp it in place. This should stop gradual creep of the stop block as you push each piece up against it - DAMHIK!
I know it's an old thread... and you might not even care anymore... There are quite a few truly good nail-guns and combination machines... most stores have a popular "in-house" brand that you can find to do most everything you need with a couple questions to the floor staff... and/or a local contractor. However, (where my input might help most), it's just experience here... ANY carpenter with an interest in nails at all, should probably check into TWO hammers... 1. The "Normal-human all day hammer"... This is just slightly "light" for you... It should still be reasonably sized (length) and balanced for your hand, which is more important as a detail in a hammer than anything else about it... BUT where it might be tempting to "man-up" and go after the heaviest beast in the shop, even a 14 oz. hammer is fine... Consider that you might plan on swinging it ALL DAY, rather than just carrying it around... 2. The "Cadillac"... This is where the "beast-mode" comes into play. We all have it... There are occasions when you're going to NEED to drive something "obscene"... It's just a fact... AND this is the instrument for that specific purpose. BUT I gotta say, there's nothing more satisfying than a "one-shot sinker" with an 18D framing nail... AND you can win a few beers "after work hours" on bets if you find just that perfect balance between length and a "HEAVY ASS" hammer-head... My personal "Cadillac" is a 22.5 oz. claw-head I found some years back and stuck on an 18.5" (36.2 cm) long hickory handle. AND so long as I don't plan on using the thing ALL DAY, I have a tendency to reach for it over the "normal human" sized one... It's just nice to give a few taps, and then make consistently faster progress. Now, for lighter framed folks, weights can go down... and obviously, the weights go up for heftier folks. This just isn't the subject or place to get too much gumption for your own good. At the "tool section" of the hardware shop of choice, you'll probably be well advised to practice swinging... SO while you're thinking about it now, it's a good time to figure out some relatively normal "target" you can bring with you for testing "semi-destructively" for hammer-target practice... This lends you the advantage of actually demonstrably measuring your fit with a hammer in the store... and you stand a better chance of buying a good fit, rather than getting a flashy expensive name on a new hammer you can't stand swinging (because it still sucks)... Just my experience, now... but 90% of the time, inefficiency with a hammer is more bad fit with its user than a bad hammer... There are folks who just don't get "focus", or need practice "keeping your eye on the nail"... BUT more often even than that, it's just a poor balance of hammer to person, than much of anything... Unlike tools and clothes, we (humans) are NOT "off the rack" standardized products. ;o)
Hands down one of the best channels and woodworking youtubers for beginners and veterans alike. Preordered my first table saw, the Skilsaw 8 1/4 with rack and pinion feature. Can’t wait to get started with the weekend woodworker course!
Great Scott, good project back in 1982 I picked up a 1950's small craftsman cast iron table saw $10 without the motor the blade filler plate was missing so I filed one. I built a stand out of scrap from an office remodeling trash can. The saw dust fell straight down to the floor. Built it at my in laws house and used a old cooler motor on a swinging gravity mount $5. It was very portable. Ten year later I sold it to a friend for $50. I picked up the extra large 1950's craftsman table saw with a all the parts and original craftsman grinder motor.
I paid just $80 for the new one and it was on a steel craftsman stand. Recently I passed on a late 1950 early 60's craftsman band saw for $80 it was nice but I just didn't have the cash.
I'm going to build my cart similar to Matthias W, style with finger joints and milled down 2x4 stock. Steve, I liked the video mash up at the end, looked spooky, ala Twin Peaks
I had so many people recommend this saw, so I bought it. It is probably the best saw for the money you can buy. Most saws in that price range are really crappy, but Ridgid included some seriously good features and a decent rip fence.
Hey Steve, just recently started watching your library of videos, and I love em. Quick question: After you discovered the incorrect height of the cart, why did you choose to put the spacers on top of the cart? Wouldn't it have been better to place them between the casters and the cart so that the entire surface was raised to the same level?? Thanks again for all the great content!
It doesnt make a difference other than for aesthetic purposes. The goal of the project was to make sure the table on the table saw was the correct height as his other work bench and thats what he did.
I’m in agreement with Scott. Why go to the effort of sanding it if all the purpose of the project was to be at the same height. We love you Steve but can’t believe you did that!!
I was having a hard time buying a table saw since they're generally pretty expensive and I was worried about buying from "budget" brands. but if it's good enough for steve then it's definitely good enough for me
I was actually looking at buying this exact kind, it was $279 at Home Depot; I went with the skilsaw for $399 and ACME Tools threw in a stand and Diablo finish blade as part of the pre order. Happy woodworking.
Do you have a video for the basic mobile work bench? I tried to search it on your channel but didn't see anything for one. I'm just starting my journey into woodworking and since I have to move most of my tools and supplies out to my back yard, I'd love to build one like yours. In LOVE with your channel so much!
Awesome shop project Steve! I was going to say ouchie... what have you done to your arm, then I realised that it was stubborn paint as it faded throughout the video!
Steve, I've been dabbling in woodworking for a couple years but recently decided to try and use my craft to make money on the side. How do you come by your more exotic lumbar and do you pay full price? Also, with the more expensive domestic stuff, same question?
Hey Steve, I'm signed up for the Weekend Woodworker course and I wanted to build this for my Table Saw. Looks like the plans are gone and you don't have them for sale in the new shop yet. Are these plans lost to time? At least until you add more plans to the new shop?
Any problems with the Ridgid not cutting square? I have bought and returned a Ridgid R4512 because the fence was was off and would not allow a straight cut. It was off by 3/16". I also had a R4513 which had the same problem. Considered buying a Sawstop but when I discovered it was made overseas I have decided to go with Grizzly. Good reviews and more affordable than many other brands.
Not really, but it's very easy to make errors when doing arithmetic. I never got full marks on a longer maths test, because _some_ little arithmetic errors would always sneak in when I wasn't paying attention.
Excellent video. Thank you. When you said 1.5x8 and 2.5x8 boards, what is their thickness? I couldn't find these sizes in Home Depot. Buy a 2x4 and split it into 2.5 and 1.5 inch widths? Thank you.
What type of table saw do you have already built up... the one you're using to cut your pieces for this project. I ask because I still need to get a table saw. Thanks Sir and thanks for making the videos!
Great video, as always and great project. I think tou could save yourself a little work by not including the techno dance music but hey, I suppose someone likes it. I look forward to your next project/video.
I can't tell you how much I appreciate these videos! As well I find a lot of woodworking TH-camrs seem to forget that people with no prior knowledge will be watching and trying to learn. I appreciate the fact that you explain everything, even the stuff that may seem obvious. 👍
check out DIY Creators excellent channell
I have the same Table saw and I was looking for the best possible stand for it. I have to say this was the most basic and practical one I found. I made it and it has worked wonders for me. I actually made it from scraps so I had to but some extra thought into the build but overall, this was PERFECT. Thank you Steve. You are awesome. Keep up the great work.
Have the R4514. Never like the stand it came with, plus to low to use my workbench as an outfeed. Going to make this but a bit taller.
My girlfriend hasn’t heard me listening to one of your videos in a little while so she asked if the king of microjig was okay. You are now the microjig king according to her lol
Love the drawer ful of microjigs. Slick product placement.
What timing! I recently bought the same table saw. I just finished building a large workbench, and was planning to build a stand for the saw to utilize the bench as an outfeed. And then, here you are with a video for the exact setup I'm doing.
That's a wonderful little cart that looks simple to build and will last for years with trouble free operation. Thanks for sharing this one!
Steve, You are my kind of wood worker. I also really enjoy your presentation. Thanks for all of your efforts.
Thanks for the great video, Steve! I have been wanting to make a cart for my table saw for a while now instead of just puttign the legs on scrap blocks to match the height of my workbench. This feels like a very approachable design, unlike a lot of the fancier carts I see on TH-cam and elsewhere. I appreciate the simplicity!
Hey Steve, watching your vids in 2019. Just wanted to say I really enjoy your videos and downloaded the plan for the BMW and made it in a couple days. I'm a novice woodworker but you have been a huge help, so thank you sir for your generosity
I like the construction method of the frame. Looks super strong and like a piece of furniture with trim instead of a few pieces of plywood screwed together.
Whoa... A quick glance and I see - now - how to extend my miter saw for a longer stop block. Thanks.
Hey, I'm glad you're back with shop projects. This cart is very useful and sturdy. Thank you for sharing. Thanks to MicroJig and Video Blocks for sponsoring the show.
+Marcelo Freitas Thanks Marcelo. Great to hear from you!
I finished mine last night. Thanks for providing the excellent design and helping me get experience in my first table saw all at once.
For fellow (rabbet) newbies, Steve's woodworking basics video on making boxes is an excellent companion to this.
Thanks, Steve! I'm hooked!
WOW - extra fancy tool riser blocks AND drawer pulls! !! !!! GREAT project Steve.
Haha! Believe it or not, those are drawer pulls from a dresser I had when I was a kid!
Steve I have watched every one of your videos & I keep watching them over and over. Thank you sir!!!!!!!! Can't wait till everything starts.
Excellent project! I modified it to fit my vintage saw. It required a motor mount that attaches to the table rather than hang off the back of the saw, so I made the stand deeper. Rather than end up with super-deep drawers, I put a divider in the middle and made drawers in the front and back. I cut a hole in the top for the sawdust, so the top front drawer acts as a sawdust bin. I also used lap joints rather than pocket screws, and the side panels are just 1/8" hardboard. That's plenty for rigidity; the frame is plenty strong.
Awesome, I especially love the fact that you can use the BMW as an outfeed table!
I will definitely make this sometime soon for my DeWALT jobsite saw.
I'm glad I bought a set of 8 locking swivel casters when buying casters for the BMW :D
I bought a Grrripper push device last week after seeing their ad on your video. It really works great.
Steve, how about sharing the micro jig wealth, eh? I'm really glad to see another project video from you!
Thanks for the video! When I go by Woodcraft this weekend and they're out of MicroJig stuff I'll know who to blame. I'm surprised you didn't use the Ridgid to cut the panels or mention why you didn't use it.
Looks pretty fancy to me: the drawer pulls match!
Steve, this is just what I was looking to build, when I came across your video. The one I was thinking about did not have drawers, but now I do think it will. Big thanks.
soy de Panamá.. sigo todo el tiempo estos videos excelentes...aprecio todo lo q hace.
Steve, I checked out your sponsor, Video Blocks. Looks like a great service and seems reasonably priced. I don't think I'm at a stage in my TH-cam video production where I could effectively use this service right now, but I'd love to give it a try later on - when I have more experience with filming and editing my videos. Thanks!
Wife and I have been watching your videos. She's deaf, so we have captions on. Thank you for the great laughs.
Great video. I made most of my stands for my bench tools. Having a place to put accessories is a bonus!
Im looking to get a table saw very soon so thank you for all these videos!
Also the Intro and product placement in the cart was genius haha 😂
Great video Mr Ramsey,I'm going to use your concept to build a kitchen island ! THANKS STEVE.
I LOVE your ads for microjig!
Your saw cart looks good! Simple to build. Thanks.
This cart was my first major project in my new workshop, I wanted a taller cabinet for my other tools so I am going to make two with tops at 34". I will make them linked with a wider top to make a bench/desk and the build a tool cabinet on top. Maybe I will never make anything in my workshop but things for my workshop! I shall use metal drawer runners this time around. Thanks for the plans, I tried the Sketchup file but it would not open for editing on my free Sketchup version.
Finally got my first gripper. Have to say i love it... well worth the money .
Oh definitely. I feel like I have much better control than using just a push stick.
Looks like you got a bunch of Kreg swag
I started drooling when you opened that treasure trove of grripers
Steve, that is a very sharp looking cabinet.
Nice easy way to make drawers without expensive slides.
I bought this table saw thanks to your recommendation I am very happy with It. But I am looking for a good explanation for what the little auxiliary fence is used for.
good timing on this I'm moving my shop from the carport to a 12x8 shed. Talk about limited space.
Awesome video! Thank you for posting!
I made a table with a drawer full of.........microjigs from the maker of the gripper.
can i use my table saw that doesnt have a riving knife without too much danger?
@@gibson_rulls4992 the knife is one of the most important , use it.
@@gibson_rulls4992 microjig! Maker of the grrripper makes a throat plate for older table saws built without a riving knife that has a splitter (basically a non adjustable riving knife) built in
that is a 300 dollar drawer, more expensive than the table saw itself
I just sliced my jig up. Didn’t hold it to the board right and whoops
Shop project finishes: great for experimental stuff.
I literally just bought my first table saw today. I already built a version of the BMW.
Ryobi has new One + palm router which is awesome. True helper!
I love this video. I was try to figure out how to arrange my wood shop.
Now making my table saw mobile solved everything. I will probably make a mobile stand for the router table, scroll saw, band saw and miter saw.
Making one of these for my spindle sander.
And I'm going to paint it bright pink.
That looks really good. Simple but practicle
"I got some scraps of polywood." - Show to at two (at least) half of a sheet :D
Beside that, i really like your videos :)
General suggestion - glue a piece of sandpaper on one side of the stop block, then put that side against the fence when you clamp it in place. This should stop gradual creep of the stop block as you push each piece up against it - DAMHIK!
LIKED IT. I'LL MAKE ONE FOR MY MACHINE. THANKS FOR THE TIP. FROM BRAZIL MY FRIEND.
I love your videos!! This one is great. You explained every step of the way not only what, but why, you were doing everything. Thank you!!
Great project. I love shop projects like this.
Thanks!
Your hilarious and extremely *aham* subtle drawer full of MicroJigs actually made me laugh out loud! Nicely done, sir!
Also, the actual content of the video is excellent as well 😊
Can you do a video on nail guns and what ones can fit multiple nails
I know it's an old thread... and you might not even care anymore...
There are quite a few truly good nail-guns and combination machines... most stores have a popular "in-house" brand that you can find to do most everything you need with a couple questions to the floor staff... and/or a local contractor.
However, (where my input might help most), it's just experience here... ANY carpenter with an interest in nails at all, should probably check into TWO hammers...
1. The "Normal-human all day hammer"... This is just slightly "light" for you... It should still be reasonably sized (length) and balanced for your hand, which is more important as a detail in a hammer than anything else about it... BUT where it might be tempting to "man-up" and go after the heaviest beast in the shop, even a 14 oz. hammer is fine... Consider that you might plan on swinging it ALL DAY, rather than just carrying it around...
2. The "Cadillac"... This is where the "beast-mode" comes into play. We all have it... There are occasions when you're going to NEED to drive something "obscene"... It's just a fact... AND this is the instrument for that specific purpose. BUT I gotta say, there's nothing more satisfying than a "one-shot sinker" with an 18D framing nail... AND you can win a few beers "after work hours" on bets if you find just that perfect balance between length and a "HEAVY ASS" hammer-head... My personal "Cadillac" is a 22.5 oz. claw-head I found some years back and stuck on an 18.5" (36.2 cm) long hickory handle. AND so long as I don't plan on using the thing ALL DAY, I have a tendency to reach for it over the "normal human" sized one... It's just nice to give a few taps, and then make consistently faster progress.
Now, for lighter framed folks, weights can go down... and obviously, the weights go up for heftier folks. This just isn't the subject or place to get too much gumption for your own good. At the "tool section" of the hardware shop of choice, you'll probably be well advised to practice swinging... SO while you're thinking about it now, it's a good time to figure out some relatively normal "target" you can bring with you for testing "semi-destructively" for hammer-target practice... This lends you the advantage of actually demonstrably measuring your fit with a hammer in the store... and you stand a better chance of buying a good fit, rather than getting a flashy expensive name on a new hammer you can't stand swinging (because it still sucks)...
Just my experience, now... but 90% of the time, inefficiency with a hammer is more bad fit with its user than a bad hammer... There are folks who just don't get "focus", or need practice "keeping your eye on the nail"... BUT more often even than that, it's just a poor balance of hammer to person, than much of anything... Unlike tools and clothes, we (humans) are NOT "off the rack" standardized products. ;o)
Steve Ramsey! Hoarder of the GRR-Ripper!
I love the funky music! I was definitely grooving while I was screw....ving.
Hands down one of the best channels and woodworking youtubers for beginners and veterans alike. Preordered my first table saw, the Skilsaw 8 1/4 with rack and pinion feature. Can’t wait to get started with the weekend woodworker course!
الله يعطيك ١٠٠٠ عافية يا فنان اخوك السوري من تركيا
For the inside panels I went with 1/2 plywood 3/4 seems like it would make the cabinet heavier then it would need to be.
If it's on wheels it doesnt really matter how heavy
I made one with the 3/4" ply to *ensure* it would be heavy. I don't want this thing to be top-heavy when I'm cutting on top of it.
Great Scott, good project back in 1982 I picked up a 1950's small craftsman cast iron table saw $10 without the motor the blade filler plate was missing so I filed one. I built a stand out of scrap from an office remodeling trash can. The saw dust fell straight down to the floor. Built it at my in laws house and used a old cooler motor on a swinging gravity mount $5. It was very portable. Ten year later I sold it to a friend for $50. I picked up the extra large 1950's craftsman table saw with a all the parts and original craftsman grinder motor.
I paid just $80 for the new one and it was on a steel craftsman stand. Recently I passed on a late 1950 early 60's craftsman band saw for $80 it was nice but I just didn't have the cash.
I'm going to build my cart similar to Matthias W, style with finger joints and milled down 2x4 stock. Steve, I liked the video mash up at the end, looked spooky, ala Twin Peaks
Nice idea for small space. Thanks.
That's the exact saw I've had my eye on. Nice and affordable, and Ridgid has their LSA. I've got a few Ridgid cordless tools already and I love them.
I had so many people recommend this saw, so I bought it. It is probably the best saw for the money you can buy. Most saws in that price range are really crappy, but Ridgid included some seriously good features and a decent rip fence.
What model saw is that??
You have all the micro jigs !
Excellent video, Steve. In the plan, you mentioned of 2.5 inch and 1.5 in boards. How thick are they? Thanks again!
I hope you are ok, with the fires up in your area!
Stay safe!
Pocket screws + Seinfeld’s bass player …. Subbed
Awesome video Steve!!
Nice video. You have almost as many GRR-RIPPERs I have.
They just seem to accumulate!
you are the best! cheers from France
Hey Steve, just recently started watching your library of videos, and I love em. Quick question: After you discovered the incorrect height of the cart, why did you choose to put the spacers on top of the cart? Wouldn't it have been better to place them between the casters and the cart so that the entire surface was raised to the same level??
Thanks again for all the great content!
It doesnt make a difference other than for aesthetic purposes. The goal of the project was to make sure the table on the table saw was the correct height as his other work bench and thats what he did.
I’m in agreement with Scott. Why go to the effort of sanding it if all the purpose of the project was to be at the same height. We love you Steve but can’t believe you did that!!
I was having a hard time buying a table saw since they're generally pretty expensive and I was worried about buying from "budget" brands. but if it's good enough for steve then it's definitely good enough for me
I was actually looking at buying this exact kind, it was $279 at Home Depot; I went with the skilsaw for $399 and ACME Tools threw in a stand and Diablo finish blade as part of the pre order. Happy woodworking.
Thanks for the free plans, Steve!
Stopped this video so I could indulge in laughter at the second drawer full of microjigs. I’ve never thumbs-upped a video so quickly
Best wood working chanel!!!!!
Do you have a video for the basic mobile work bench? I tried to search it on your channel but didn't see anything for one. I'm just starting my journey into woodworking and since I have to move most of my tools and supplies out to my back yard, I'd love to build one like yours. In LOVE with your channel so much!
Awesome shop project Steve! I was going to say ouchie... what have you done to your arm, then I realised that it was stubborn paint as it faded throughout the video!
Steve, I've been dabbling in woodworking for a couple years but recently decided to try and use my craft to make money on the side. How do you come by your more exotic lumbar and do you pay full price? Also, with the more expensive domestic stuff, same question?
great teacher thanks for getting my brain into gear
Cool Greetings from Bavaria.
Hi Benjamin!
You rock Steve!
Hey Steve, I'm signed up for the Weekend Woodworker course and I wanted to build this for my Table Saw. Looks like the plans are gone and you don't have them for sale in the new shop yet. Are these plans lost to time? At least until you add more plans to the new shop?
I also am wondering the same
Great project! I've been looking for a new table saw and I planned on Building something similar for it!
Liked that Steve ...thanks john uk
Nice video Steve. I think I'll make one of these when I buy my new table next year. Thanks man
Hello Steve, start making my mobile table for my Metabo table saw machine, found very nice tips on your You Tube videos.
Any problems with the Ridgid not cutting square? I have bought and returned a Ridgid R4512 because the fence was was off and would not allow a straight cut. It was off by 3/16". I also had a R4513 which had the same problem. Considered buying a Sawstop but when I discovered it was made overseas I have decided to go with Grizzly. Good reviews and more affordable than many other brands.
Dear Steve, please make a compilation video of all your Microjig intros, they're hilarious!
I have the same saw. This is great!
Awesome video, I love the new music
Glad to see you’re back
Great Job Steve!
How did you come out 3/4 inch short? Easy! Like I've said several times... Math is hard!
Not really, but it's very easy to make errors when doing arithmetic. I never got full marks on a longer maths test, because _some_ little arithmetic errors would always sneak in when I wasn't paying attention.
I know. I was just trying my bit at a little humor.
I would have taken the castor wheels off and added spacers to the bottom, then screwed the wheels back onto the spacers 😉😉
9:36... story of my life when measuring anything 😐
Excellent video. Thank you. When you said 1.5x8 and 2.5x8 boards, what is their thickness? I couldn't find these sizes in Home Depot. Buy a 2x4 and split it into 2.5 and 1.5 inch widths? Thank you.
great work once again, Steve!
Thank you!
What type of table saw do you have already built up... the one you're using to cut your pieces for this project. I ask because I still need to get a table saw. Thanks Sir and thanks for making the videos!
Awesome job as always Steve! Keep it up 😎👍🏼
Great video, as always and great project. I think tou could save yourself a little work by not including the techno dance music but hey, I suppose someone likes it. I look forward to your next project/video.
+Tom Denny Yes, you are correct. People have different tastes in music. Crazy!
Another great shop project. Hey, you know what you need? A grriper!! LOL
Nice and simple! ,,👍