Waste Oil burner Flame control and automation.
ฝัง
- เผยแพร่เมื่อ 29 มิ.ย. 2024
- Finally I'm back. Thanks to everyone for the support and messages over the years. I hope not to let you down with my future offerings and to grow the channel up to and past 100K subs.
This vid shows how controlling waste Oil Burner air and fuel can make for stable running burners. Drip feed is good and well for short runs when you are with the burner but to run it for many hours without constant adjustment, some automation and control is needed. I use a cheap Pulse type car Fuel pump with an electronic Cycle timer. This is the same principal used by the Chinese diesel heaters and one I showed may years ago in other vids.
By being able to feed a precise amount of waste oil into the burner, variations from oil viscosity and tank level changing are avoided. You can also take the waste oil fuel from ground level which makes handling much easier. The Blower is Controlled with a PWM controller available of Fleabay and other similar sites to match the air output to the fuel pump to produce a constant , stable flame.
I hope you all find this video and the ones to come as entertaining as before and thank you again for all the kind messages of support, concern and encouragement. It was much appreciated and extremely Humbling.
I hope to be doing many more waste Oil, Solar and other videos on a regular basis from now on and improve my content as I get back into the swing of things. - บันเทิง
2021 has been great, oil burner is back, photon is back.
I'm not a scratch on Photon, Andy is a Genius and I am happy to see him back too. I'll try to make my vids as entertaining and interesting as his though.
@@glumpy10 Man your videos are just as entertaining. He is the king of electricity on TH-cam and you are the king of fire. both very very satisfying genres to watch
@@glumpy10 Andy may well be a genius in his field but so are you in yours ! You Sir have saved me hundreds and hundreds of pounds so far and that will run into the thousands because of you ! I now heat my entire house from oil based entirely on your design. :)
@@glumpy10 I really love the waste oil burner barrel that is a lot of fun for the kiddies i'm thinking about doing a similar project that involves screening out the sparks to minimize any type of injury in case somebody were to get burned by a few sparks my goal is to use something like what's inside of a catalytic converter and put that on a screen of some sort on top of the barrel itself so that way I can still have fun but reduce the number of sparks so that way I don't accidentally start fires just in case it's a bit windy out but anyways cheers to you mate if you desire so by all means feel free to email me railcon5100@gmail.com
@@414RadioTech Don't know what you would use for the sparks that would stand up to the heat. Even Cat Honeycomb would melt I believe. I Picked up a Cat ( off a car, not the type that sits on your lap) some time back and was going to use that for a Vid.
Bit of pre heat, bit of oil and off it will go... For 5 Min anyway. There really isn't a lot of sparks with oil and the few there are don't tend to travel because the majority of them are burned before they leave the chamber .
I finished making mine tonight and... holy hell 😮 it was shooting out 6 foot flames and sounded like a jet taking off in my backyard. 😂
I watching your video to maybe learn how to harness its power.
Wish me luck.
Ffs yes dude!
Good to have you back!!
Where the bloody hell have you been ? 😀✊
Man You are quick on the draw. Thanks for the encouragement mate. Very much appreciated!
@@glumpy10
Made my day dude.
Been waiting for it.
Stuck in hospital doing nothing that why quick response.
✊
Welcome back! TH-cam just got 100% better!
The fabled return is upon us
matches haven't been discovered again XDDDDDDDDDDDDD the comedy of this guy
Glad your back. Being American it’s a shame we are all about safety glasses and gloves. I never use em, and have all original equipment at 62
YES ! He is back. You have been missed. Was just thinking about you the other day while cleaning up my subscriptions. Looking forward to whats next.
Indeed, I am silly enough to watch these videos!
And I'm happy to see you back here, burning oil and delivering the humour we love!
Thanx for a great vid!
You are an inspiration to generations of people that can no longer grow eyebrows! :D
Welcome back buddy
The master returns... things where getting a little too quiet around here !
One to savour with undivided attention and a nice chilled beverage.
Hope it lives up to expectations and I'll try to make each and every vid better and more entertaining.
Your videos inspired me to experiment with and build my own oil burners years ago. Great to see new content and love the personality you put into the mix. Cheers from Iowa, USA.
Also the mention of aussie50 was great. The memory made me smile. Ed was an inspiration and is missed more than I can express with words.
GREETINGS FROM BRAZIL, OIL BURNER!!!
GREAT, GREAT NEWS TO HAVE YOU BACK!!!
FICAMOS TODOS TRISTES E CHEIOS DE SAUDADES.
VOCÊ CONQUISTOU AMIGOS POR TODOS OS LUGARES DO MUNDO.
Your comment about Americans using torches instead of matches is so true. I wondered the same thing several years ago. Then I looked around my home. The water heater, gas logs and gas furnace have electronic ignitions. There is ALMOST nothing which requires a match (or a pocket lighter) these days. We do have 6 "six day prayer candles" (candle inside a tall glass jar... ) We use them for emergencies during black outs. Have book matches stored with them but I usually use a 'barbecue lighter' instead. (=Guess I need to buy a torch so I can assimilate with all the *other panty-waisted wusses* ... ) ;^) Only compensation is over 50% of us still own our firearms! BTW, long ago you knew me as "OgMandin0."
Yasssss. Welcome back. Subscriptions, notifications and patience paid off :)
I'm still silly enough. Welcome back, friend!
My GOD!! YOU ARE BACK!! And so are PhotonicInduction.... what the hell?! :D ME SO HAPPY!
I was drawn to your site by two words
❤️🔥OIL BURNER❤️🔥
THATS WHAT I DID FOR THIRTY FIVE YEARS
everything oil ❤️🔥
I even made SNOW with an oil burner😳
so I love to see your videos back!
I LOVE YOUR SAFETY WARNINGS❤️🔥
good luck to ya buddy
I hope you guys can survive your government❤️🔥❤️🔥❤️🔥❤️🔥❤️🔥❤️🔥❤️🔥❤️🔥
Welcome back mate. I know it is hard to believe but I really enjoy your videos and sense of humor. Oil burner has enormous possibilities that need further development. Good Luck.
Yes yes yes! Best day ever!
Thank you for your information on the foundry burner ,
that's what i've been looking for .
melts aluminum in 4 minutes with waste oil , wow
i'm gonna melt 5 tons of it for a special project with a homemade rotary unloader .
Thanks again from Canada.
Keep making videos and ill keep watching them !
Man, you'll kick the Earth out of orbit with that thing!!! Loved it! Welcome back mate 👍😁
Great to see you back. Good idea with the air/fuel automation!
Great to hear from you again!
you have the best oil burner vidios out there, I just build my first one based on another of your videos. I'm going to build one like this for bigger parts. thanks for giving us the know how to what we have all been thinking, " How do I use all this old oil to melt things." thanks again.
It is great to see you again!
Your back!!!!! I've been telling people about your channel for years. Damn glad to see a new video
Welcome back!!
So good to hear you again!
Don't forget the health and safety notices!
Great to see your back
PERKELE !!! Thank You for coming back to our life !!!
Glad to see you’re back I have missed your videos
Holy hell! Welcome back! Missed your videos!
Nice to see you back .A Big Hello from Tennessee!!
TH-cam just got more exciting! Glad to see you back ! Looking forward to more oil fired fun..
Morning,have you been stuck inside the inter webs ?? Scraping vids interesting. Good to have you back.
Glad you are back. One of my favorite youtubers
thank god he came back! I love this guys videos!
Oh yeah, The king is back!
Glad to hear from you again!
Good to see you back.
Oh this is a delight!
Storing my old frying oil for some later use I was reminded of this channel and the little back and forth we had some amount of time ago. Looks like you did make your return! :D
very nice to see you are back.
Holy crap YOU'RE BACK!!!! Missed you man. Looking forward to the new content.
Welcome back!
Glad to see your back. I've missed your videos please keep them coming. I hope all is well.
Glad to see you back!
Oh yeah!!! Great to have you back mate! 😀
Great to see you back mate!
Man, I had forgotten about this channel, so glad I’m subscribed! Welcome back!
Good to see you back, was worried that bloody neighbour had encased you in the patio, lol!
We have moved and now have great neighbours. I was talking to the Mrs a few months back and I said you were very keen to get out of the other place. She said I was worried you were going to kill the idiot next door. I don't think she was joking. Much different here though.
@Cory Gill Until you go from one to the other, you don't realise what a difference good neighbours can make. I can get away with anything here. Neighbours love me... well so far at least. I look after their gardens while they are away, collect mail and do lawns. Also done some repairs to mowers, lent them tools and done neighbourly things. It's no big deal at all but they go on like I am donating a Kidney or something! No one seemed to like the previous owner though whom from what I gather was a tattle tale and a pain in the backside. When I have wanted to make noise or do something, I have asked apologised and it's been "no problem, do whatever you like" and they even come out and help me do things like burn off etc which isn't exactly Kosher here. It's like paradise compared to the last place.
@Cory Gill My Neighbour was looking after some sheep in the backyard for the local Ag school over the holidays 2 years back. Their Mother got sick so they had to be with her. Few days turned into a month and I was feeding the sheep for them. Trimmed all my overgrown hedges and shrubs and they went though it like no tomorrow. Every day I'd cut a pile and think that will hold them for a while and next morning they would be climbing the fence and calling for more. I took 7ft off over 150M of Hedge and they went though it. I'd go to feed them and the dog and the cat would wander over as well and they would all stand there looking and rubbing up to each other in a very civil and polite way. Hedges need Trimming again but I haven't got my 4 woolly jumpers to feed now. We all missed them when they went back to the school but I saw them at a local Fair a few months back where the school had a petting zoo setup for the kiddies.
@@glumpy10 I might have to invest in one of those new fangled jumping lawn mowers you cared for...
@@undernetjack My uncle had one for decades. Would buy them as lambs, fatten them up then have them slaughtered. When My cousin came along and got a little older, of Course she got attached and the thing wasn't going anywhere. Oldest sheep ever, was nearly 20 when it died.
Great you're back! Enjoyed the video
Always liked these. Was messing around with my burner earlier today. Made me want to watch your scrap melt video.
Great to see and hear you again. It's been to long. Cheers Stephen
The legend returns ! ..
Thank the gods you have returned to us. Epic!!!!!
Good to have you back
The commentary has an edge.
Great perspectives.
So glad to have you back youtube just wasn't the same without you. Hope all is well and hope to see lots of videos back in action soon.
Love the videos!
Good work mate!
10:00 Yes. Welcome back! I saw an Oil Burner video recommended and thought it was an old one - was pleasantly surprised to find out it was a recent upload.
great video welcome back
Holy shit, Welcome back!
Glad your back!
Glad you're back! Was worried. I thought your neighbor may have retaliated from all the spankings you were giving him.
Hey D, greets from ZA.... Glad to see u are still flaming good!!... Keep it spinning....E
Glad to see you back. My old subscription even survived! We need folks like you in 2021 :-)
Thanks mate, Appreciated.
I just installed a homemade oil burner in my outdoor boiler. Works great and I get my waste oil for free. Love the channel, I hope you get back to making videos.
Man am I glad to see you back mate.
I thought you were a figment of my imagination like a plume of diesel. Good to see you back
Oh man . I came inside after melting 80 kg alloy today and look what I've just found nd.
HEAVEN
Welcome back been 5 yrs waiting for your next video.
I think I have been promising to come back soon for about 3 years but finally the time was right.
Glad to see you are back and even though I'm subscribe the notification thingy was off so I watched your next video first lol.. ps the bell on now.. thanks for shareing Regards Sleepy
Good to see you! Excellent video.
The Burt Monroe of oil burners. Bloody good videos.
Welcome back. I was hoping you didn't burn yourself up. I've used your designs in my home charcoal plant. Thanks again for all your hard work! Educational and entertaining.
Welcome Back! We've missed you.
Good to see your videos again.
Glad to see you back !
You must have gotten rid of those new neighbors . Now you can get back to it .
glad your back
You’re back🍺🍺🍺🍺👍 let the good times roll get my fix of oil 🔥
welcome back
We never left you, we just missed the notifications :-)
On behalf of myself, as well as many others, Welcome Back! It's great to hear your voice again! We have been patiently waiting for this day!
As a side note, in the north, Canada still loves matches, please continue as you like! After all, this is your channel and we all luv you and the content!
Thanks mate. Very kind of you and very much appreciated.
Yeah m8 still silly enough to watch the best...so good to see you back on ..we do have matches here in europe.
Welcome back.
Welcome back. I'm glad I never cancelled the subscription, I would have missed out. Half way through this latest video I suddenly thought "What's going on??? Not Safety tips??" And then you went and redeemed yourself. But I thought that last safety poster was meant to warn about not drinking the oil.
Geez, you could be right mate! Perhaps I mis interpreted that. I'll have to correct that in a future Vid.
Wonderful. I missed you.
Never a dull moment to watch your videos mate. Hello from Palau. I thought someone hacked your channel but when i recognized your voice i turned to my wife and said, "babe, he's back". Snd she respond, "oh that guy?". I thought only me but even my wife enjoyed watching your projects, but most especially the safety tips. I was assuming you had a strict and whiny neighbor that made you stop creating videos. I have one built project that i copied from your project and it was blasting powerful flame. Replica of your burner when you first tried out syphone. Once again welcome back and dont let yhe flame go out. 🙂🙂🙂
Soo glad to see you back mate. Like someone else stated, was going through and cleaning out subscriptions and saw you had a new up load. Almost sharted my BVDs.
Many thanks from a loyal subscriber in the SE states.👍👍
Good to see you back. Long time. Looked ya up but nothing
This brought a smile to my face.
Freakin sick!
was literally just thinking of you, so I look and new video 12 hours ago!
Hi Sidney' A nice warm video, I am sitting here frozen in Scotland; Just watching your video has het me up a little. I am working on my Burner just now but I had a let down?. My local garage gave me the free oil he was glad to get rid of it, But? Bloody god damn it was full of water so he is sacked. I wasted two hrs trying to get my burner up and running, But I will come back next week with maybe good news. Take care great entertainment.
If you put the oil in a drum or jerry can, the water will go to the bottom and you can draw the oil, carefully, off the top. Alternately use a drum with a tap on the bottom and drain off all the water by tilting the drum and then you should have dewatered oil.
Cheers mate can honestly say that I've never been so wrapped to see a notification
Welcome back thought you fell in the burner!
i thought his neighbors had him commited lol
Thank you for your videos they were part of the inspiration to plan out and build my own waste oil burner glad to see you back! Something ive always wondered does the style of burner you use self clean? The use of a timer circuit was very creative.
Yes, one of the things I most like about the forced air type is they self clean. No matter how much or what type of oil you use, there is never any buildup other than just a Pinch of fine ash which is blown out next time the burner is fired up. The timers add a level of control that elevate the reliability and functionality of these burners.
Glad your back, was hoping for some major advances
Give it time. Few things I want to work on but getting steel and things made is near impossible right now.
Well I count you as my friend in Australia photoninduction as one in Europe. At least I have 2 friends nome in this contry mind ya.
Yeah mate love those videos hope everything is alright there.
You have inspired me to buy a pair of safety thongs and safety singlet just for these projects! After watching you safety tips I felt irresponsible and stupid without these items ;}
It is good to see that you are back. You need to put a warning at the beginning for people that live in California that just watching the video with cause cancer.
Or have a Heart attack! I have a friend in Cali. Got to admit I have to check the things he tells me from time to time that go on there but the only thing I have every found is he understates the stupidity and madness of the place. Then again, Lot of things NOT to be proud of going on in Oz of late as well.