This video was incredibly helpful, thank you for making it.
ปีที่แล้ว +2
I just assembled the saw not following instruction to turn it over. 1st assebled legs, wheelsa and stops at the end. 2nd put saw on the stand and put in four screws. It seemed much easier and I did not have to worry about damaging the table surface.
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice th-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
Just purchased the 36v version including stand and AC battery adaptor, dam nice bit of kit !! and have the best of both worlds plug in power or battery
Just got his saw 11/8 for 329 at lowes , noticed yours has a completely different fence system. So far loving it, straight out of box and fence spot on.
@@newbieshoplawn5836 Well, that's about $600 USD. I think the normal price on this saw is $529 here with stand, and $599 for the cordless version with no stand.
Just got it for my birthday. Haven´t used it yet, hope it's going to be better then my first experience. The slider of the fence had a broken part in the aluminum which is why I couldn't move it past 20 cm's. Very annoying but I have fixed it. Set-up with your video was quite easy however :)
thx for the video! That it only has adjustment on one leg is actually good design - specifically something called "robust design", because the three other legs will always be stable - and the third leg will only help to not make it tilt.
Double check that it is the same. In Australia we also have the Metabo line of table saws and it is very different. For example it basically caters for a left hander based on the where the handles and switches are setup.
This video was incredibly helpful, thank you for making it.
I just assembled the saw not following instruction to turn it over.
1st assebled legs, wheelsa and stops at the end.
2nd put saw on the stand and put in four screws. It seemed much easier and I did not have to worry about damaging the table surface.
Thanks for putting that up. It made unboxing and setup of my Hikoki same table saw a breeze.
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice th-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
Just purchased the 36v version including stand and AC battery adaptor, dam nice bit of kit !! and have the best of both worlds plug in power or battery
Just got his saw 11/8 for 329 at lowes , noticed yours has a completely different fence system. So far loving it, straight out of box and fence spot on.
This one is the Australian version.
Been using it for a month and love it too. The price here is $900 :(
It is 299.00 now.
@@newbieshoplawn5836 Well, that's about $600 USD. I think the normal price on this saw is $529 here with stand, and $599 for the cordless version with no stand.
Just bought this today in Melbourne Aus. $1199 inc the stand. Lets see how it goes.
Now that you've had it a year, are you happy with it?
Just got it for my birthday. Haven´t used it yet, hope it's going to be better then my first experience. The slider of the fence had a broken part in the aluminum which is why I couldn't move it past 20 cm's.
Very annoying but I have fixed it.
Set-up with your video was quite easy however :)
Good job, just bought one and u saved me a lot of time.
thx for the video! That it only has adjustment on one leg is actually good design - specifically something called "robust design", because the three other legs will always be stable - and the third leg will only help to not make it tilt.
Good general setup video and is a keeper. Thankfully, the music is low key and not distracting.
My fence doesn't unlock on first assembly . No lever found despite manual showing one.
Appreciate the video mate. Common problem amongst reviewers is the soft start failure. Any problems? Howzit running in general 1 year on?
What is the difference btw between C10RJ and C10RJWAZ? My girlfriend order the latter but received the first.
How much does the saw weight on it's own without the stand?
Heavy
not a good idea to use the mitre guage with the fence...not safe
Dziekuje za film 🍻🍻🍻🍻
Do you know what the measurement of the saw is when the legs are folded up?
50 cm max in depth
Pretty big
Collin I just paid 999 with stand from Sydney tools Melbourne
Can anybody tell me what is the insert plate made of? Is it strong enough or shitty plastic like in Makita mlt100?
It seems to be aluminum alloy or something like that. Atleast not plastic.
Metal
does this saw have a soft start?
yes, and brake
Yess
Lovely
Nicely done. I'm thinking of getting one and I found your vid to be very informative. How long did the blade last? Socks and thongs, how Aussie!
Lol
Metabo in the US
Double check that it is the same.
In Australia we also have the Metabo line of table saws and it is very different. For example it basically caters for a left hander based on the where the handles and switches are setup.
Hmmmmm Looks like Hitachi/Metabo
why do DIY-people on YT always wear flip-flops..
Lol
Just bought the Metabo
Wait till you have problems.
@@B0r0 that's true for every brand