EASY +70% HASHRATE- Overclocking Guide - Iceriver KS0 Pro
ฝัง
- เผยแพร่เมื่อ 8 ก.พ. 2024
- Very good result, more to come.
➡️ Buy KS0 Pro here: www.cryptominerbros.com/?wpam...
➡️ 12v Fan: amzn.to/4bxPxoo
➡️ Thermal Grizzly Paste: amzn.to/3w8QzHn
➡️ Thermal Glue: amzn.to/3Sv8dwr
➡️ 5mm Copper Heatsink: amzn.to/489efZl
➡️ 230W PSU: amzn.to/49qbpjU
➡️ 120v Axial Fan: amzn.to/3OCBjsJ
➡️ 12v Fan controller: amzn.to/3OAkG0M
➡️ Blue heat sinks: amzn.to/49qbsMC
➡️ Thermal pads: amzn.to/3SAktLY
➡️ 3d Printer I used to print these (cheap, beginner model) amzn.to/3SwTXDl
➡️ Better, faster 3d printer: amzn.to/49plj5h
Mad Electron Engineering's YT: @madelectronengineering
SerpentX Tech's YT: @SerpentXTech
Tswift KS0 Pro Firmware, Instructions, Iceriver Monitoring Software: t.me/swift_mining/3133
3d Print files I used:
Shroud: www.thingiverse.com/thing:644...
Stand: www.thingiverse.com/thing:625...
If you need a 3d printer, the Ender 3 is cheap and great beginner option.
Buy it here: amzn.to/3SwTXDl
Follow me on X: X.com/TheTechnicals
All muh links: linktr.ee/thetechnicals
Have hardware and ready to start mining? Try HiveOS!:
➡️ hiveon.com?ref=9720549564
Nicehash is good too if you’re mining on your gaming rig (Free!):
➡️ www.nicehash.com/?refby=b46b1...
Ready to graduate to ASIC miners? Got you covered:
➡️ www.cryptominerbros.com/?wpam...
Primochill WetBench:
➡️ amzn.to/47DFhrw
Email me: TechnicalsMatt@Gmail.com
“TheTechnicals” is not a financial advisor. The information contained within this media is for informational and entertainment purposes. The Technicals assumes no responsibility for any actions taken by viewers. We encourage viewers to do their own research on products, services, and investments themselves.
#cryptomining #kaspa #ks0 - วิทยาศาสตร์และเทคโนโลยี
Great step-by-step video 👍
Thanks for that handy guide on how to add better cooling. Strangely, I found the sound of the 3D printer on in the BG quite relaxing😂 Good job👍🏾
damn bro you posted 2 videos in one day!!
Probably the best video to drive to work to 😂😂
I mount my phone above my steering wheel so I can watch XG videos
Très bonne vidéo explicative, merci de France ;)
Good stuff keep it up!
tytyty
Incredible...
Lets go!
Thermal pads cut the blue side with razor so much easier. You should try out the copper heat sinks that have the 5 mm pins shorty's don't dissipate heat very well.i ended up going with a piece of 1/4' copper Tube with 2mm Copper shim soldered to the 1/4' tubing glued to the Fet's, i also mounted the copper tubing to the heat spreaders in that area to pull the heat away getting 315 gh/s 200 watts. You will need an old AIO Water cooler,you will need the pump&radiator with hoses to attach to the 1/4" copper tubing. i was bored when i did all this lol.
i planned to but wanted to test the "proven" method first. Now to figure out how to get those baby sinks off without damage
Heat and twist@@TechnicalsMatt
спасибо за идеи!из России.с любовью)
Thanks for the video , the things we have to do to ROI , only one silent plant joke. 😂,
Tswift's fee is 0.5% not 5% as shown at 7:05 (Just FYI) Great video!
I caught that too. WHOOPS
Your video is very detailed with the procedure to follow but I am not sure why your temps are so high. Nice shroud design.
My office ambient is about 80F from the GPU rig. Plus i'm trying to simulate conditions during summer so I know what will work and avoid a surprise downage.
I can't open link for 3d Print files Shroud. Can you give another link please?
Awesome video 😀 curious if you got the Nov/dec batch ?
Dec
Awesome step by step video. However what about the increased wattage/volts (?) Going through the power berral
Power berral?
@@TechnicalsMatt does the power to the unit is in a shape of a berral instead of a 4 pin connection?
hey technical, hope you doing well, did you install the 12v fan? could you make another video of your full kit installed?
I did, and there is another video using the 12v fan
Thank you for the video. Do youbthink 7x7x6mm heatsink would be ok ?
Might be a tight squeeze but i think you'll have the clearance!
Can anyone point me in the direction of the quietest fans? Was looking at the Be Quiet Silent wings pro 4 120mm YWM as I will be using two shrouds (2 fans) and 2 ks0 ultras will be rigged like this in my bedroom :\ Please help.
So the KSO Pro can pull 200w, I was afraid I might damage mine going above 125w lol
Where can I get one of these 3d prints made?
those shrouds are all over etsy and ebay
Hi, thanks for your videos, what is in firmware L 250G_L_ks0pro and other without L??? 250G_ks0pro Thank you.
i think im on the 300 full pulling 320 ish
Can we able to overclock ks0ultra and goldshell al box ?
No idea, maybe on the ultra
bro i thought you had a tv on in the background and realized it was you talking halfway through the video
Haha, it probably was the TV or youtube vids I was listening to while doing this
thermal paste is suitable Thermal conductivity, W/(m⋅K): 5 or do you need more than 5 ?
For something like this, go as high as reasonably possible. Not sure of TG's rating but the pads are 12mk
спасибо друг!@@TechnicalsMatt
I've blown up three sets of these AC Infinity fans just by plugging them in turning them on high they pop and then smoke and I'm using them in the same manner don't know why
Seriously? Link to the fan?
@@TechnicalsMatt is the AC Infinity set that you plug into the wall is that not the one you're using??
They said in the email that I should be pulling the hot air not pushing so it's probably the high pressure that's killing them
I have a question...what does it mean "Board Temp(in)" and "Board Temp(out)" ? is temperature from where ? thanks
sensor reads the intake temp and outlet temp. not sure where the sensors are
@@TechnicalsMatt my temp 1 is always maintained at 79C to 80C...it is dangerous ? I used 340L
Resistance is Futile, The KS0 got assimilated and turned into a Borg unit!
If only it looked like 7 of 9
Is it worth picking one of these up to tinker with?
i think so tbh, as long as the price is right
@@TechnicalsMatt what do you think a good ballpark price would be? Also, slightly off topic, would you do 3D printing videos too? Like, design and programming? I need to look into printing, don’t know a thing about it.
Strange question... Has anyone tried the ks0 pro stock firmware on a og ks0? Curious of results if anyone has.
different encryption on the ultra
Полная фигня хорошая большая термопрокладка одиссей например на 4 мосфета на нее один большой радиатор 50х25х15 можно и побольше главное высота 15 сверху еще одну термопрокладку чтобы отводить тепло на основной корпус и на дроселя тоже термопрокладку до основного корпуса. а на продувку достаточно ноктуа вентилятора не настолько шумного. Результаты будут значительно лучше по температурам чем у вас проверенно! 😂❤😊
Help. After 20 hours working green and red light are off, fun is working, but hash rate are zero and webInterface not working. Plug power off and on = asic start work again. After 20 hours the problem repeats itself. I have 3 asics and all have same problem. Help!
Reset it
@@TechnicalsMatt Hard reset or program reset?
@@MihaltosHi, same problem. After hard reset works miner well on 200GHs. Whats you?
@@RadoManCZ I change wi-fi router on d-link commutator and all works well
hey i have found a problem, i bought a 230w power supply, the one in your link. but when i connect to the KS0 pro nothing happens. do anyone have the same problem?
using the right barrel connector? mine shipped with a few different ones
@@TechnicalsMatt 5mmx2,5mm right?
@@TechnicalsMatt just tested with the multimeter and is "broken" not worcking ty
Take throat infection tablets!
lol just kidding nice video 🎈👍
link for fireware please?
in description!
Tytyty❤❤❤
How long will this miner run with this overclocking setting?
It went for 3 days before I powered down to do further testing for a video, it's going indefinitely, no issues.
@@TechnicalsMatt ok. And as per experience how long this miner will be functional? Because over utilising the miner power.
@@HarshalMahajan04 I really couldn't say, haven't been enough people running it long enough to tell but right now it's solid and stable
@@TechnicalsMatt Ok. Thanks.
From where you got that nice looking Multimeter, Watts, voltage..?
The one in the box with the plug? You can get them from metered mining (kit) or buy the parts and build yourself. links below to the drok meter
you recommend on buying these? there 350 now
i'd say so, yes. when/if theres a bull run, they'll go up considerably and you can sell it
i dont want to sell it just trying to get a kaspa bag@@TechnicalsMatt
Where are you getting them for 350? I'm in!!
Полностью конкретная модернизация. Выкинул процессоры которые слабые на хэш и впаял более чем мощные на хеш
might as well oil cool in a fish tank at this point
i'm allergic to immersion cooling lol
I know you are probably working on it, but the high pitched squealing sound is killing me...
The 3d printer is loud as F
Migrating it very soon, apologies
I followed the instructions as described. Red light came on and won't turn on. I can see it through the router but it doesn't load in the web interface. Help.
80 градусов на материнской плате это не есть хорошо 🤔