Dari dulu sy pingin punya ilmu kyak gini...modifikasi cakram belakang smua motor...jmn sekrng bnyak yg ingin motorny dibikin cakram belakang....cmn blm bnyak bengkel yg bs
The Master cylinder comes on the bike as part of the Linked brake system Honda puts on them. It is mounted below the right handlebar underneath the plastic panels and can take quite a bit of effort to remove it on the 2015 model and later. Once it is removed you also have to make a longer brake cable to go from the lever on the left handlebar all the way to the drum brake lever. From factory they have a short cable to just out of sight at front then another longer cable to the brake lever at rear wheel. I would mention that it would be better to simply buy a proper left handlebar brake master cylinder with lever complete from a different model Honda that has a rear disc brake from factory. Then it would match the appearance of the right master cylinder for the front brakes. Also he shows removing a brake hose from the front caliper. It is smarter to mount a short loop hose from one of the other brake hoses using a longer brake hose bolt where the 2 hoses mount then all three pistons on the front caliper will work together for better braking by the one right brake lever. That longer bolt will also require 3 seal washers; 1 at bolt head; one between hoses; and last between hose and caliper. The idea is good but performed poorly from a engineering point of view. The disc to be any good must run true & his did not. A shallow circle should have been machined onto the rim to center the disc and ensure a flat surface to mount on. He also used non hardened bolts for caliper mounting. Done properly there is no need to retain use of the drum brake. It was pretty weak anyway.
I put a disc in the back just like you did, but I couldn't manage to adjust the combination. Do we need to weld the part you are welding? Is there another way? If it is as tight as before, it is enough, but it does not work the caliper at all.
I have removed the copyright the copyright operate brake pump I removed it front brake I stuck it so that to press 100% no 25% and I connected the rear brake caliper
Neat theory, but hell no. Way too much riding on those boogery welds. Plus you really weaken that swingarm fab. Not fun if you hit a bump at 60mph and half your scooter falls off.
The original brake is more dangerous as it is than the one I have now. When you hit the back break, then on the front break is plus 30% and is more dangerous especially in wet roads, turns or bumps.
MB PATENTS You are supposed to always use front and rear. The CBS is 70% front, 30% rear. Ive got 14,000 miles on one 2018 pcx 150 and 1982 on the other 2018. Never had a issue. I mean im not a fan of drums at all, i like the disk idea, but combined brake aint bad. Lots of scoots run it.
The cbs 70%-30% works on cars only, when you are in a road that is wet for example you can't hit the back break and the front works too even if you don't want it at this point.
Nice video bro . Keep it up (y) By the way I just want to ask about its ecu ? Have you tried to make any preventive measures to its Loosening issue to ecu socket ? Thanks and God bless (y)
@@MBPATENTS this one bro , i hope it can help , they said that it was because of loose connection thats why it was burned th-cam.com/video/K1wFATXf7Dw/w-d-xo.html
Mr JohnI really do not use a mask, I have something better than the mask so I can use both, I will announce it very soon, what a patent I thank you for, for your attention !! I love people who see the detail one of them is you respect !!!
Dari dulu sy pingin punya ilmu kyak gini...modifikasi cakram belakang smua motor...jmn sekrng bnyak yg ingin motorny dibikin cakram belakang....cmn blm bnyak bengkel yg bs
Wow... the drum is still there... OMG such a genius
I don't understand why you boiled the combination, isn't it done by raising the screw there?
There are many combinations then this is what I found to do
Where did you get master brake pump with cable operated??
The Master cylinder comes on the bike as part of the Linked brake system Honda puts on them. It is mounted below the right handlebar underneath the plastic panels and can take quite a bit of effort to remove it on the 2015 model and later. Once it is removed you also have to make a longer brake cable to go from the lever on the left handlebar all the way to the drum brake lever. From factory they have a short cable to just out of sight at front then another longer cable to the brake lever at rear wheel. I would mention that it would be better to simply buy a proper left handlebar brake master cylinder with lever complete from a different model Honda that has a rear disc brake from factory. Then it would match the appearance of the right master cylinder for the front brakes.
Also he shows removing a brake hose from the front caliper. It is smarter to mount a short loop hose from one of the other brake hoses using a longer brake hose bolt where the 2 hoses mount then all three pistons on the front caliper will work together for better braking by the one right brake lever. That longer bolt will also require 3 seal washers; 1 at bolt head; one between hoses; and last between hose and caliper. The idea is good but performed poorly from a engineering point of view. The disc to be any good must run true & his did not. A shallow circle should have been machined onto the rim to center the disc and ensure a flat surface to mount on. He also used non hardened bolts for caliper mounting. Done properly there is no need to retain use of the drum brake. It was pretty weak anyway.
Mantabbbb....gan...punya ane jg pcx cbu...blm nemu bengkel yg bs kyk gini...ini ada didaerh mn gan
I put a disc in the back just like you did, but I couldn't manage to adjust the combination. Do we need to weld the part you are welding? Is there another way? If it is as tight as before, it is enough, but it does not work the caliper at all.
There are many ways to find the time but they all have to be flix
@@MBPATENTS Can you help me find one of those ways?🥺
Hi. Do you know where the signal relay is? Pcx 125.2015
Hi Anastasie Έλληνας είσαι? I can't understand you explain to me a little better.
Wow, wonderful conversion. You can use rear drum like hand brake!!
Yes!!
Esse freio a disco é realmente seguro?
Yesssssssssssss! 😉
So far there hasn't been a problem?
Bom dia vc é de onde ?
Albania!!!
Incredible bro. Ypu are a good Mechanic
Thank you very much!!
wow well done dude you're amazing
pasang di area jakarta ada gk bang?
Kalo ada di daerah jadetabek sy mau pesean
Hi parlank build it yourself from scratch from sh you can build it but it has too much conversion must change everything nothing fits
How much at all. I want my pcx like this.
Good work, I want to do the same, can you give technical information?
Yes
I have removed the copyright the copyright operate brake pump I removed it front brake I stuck it so that to press 100% no 25% and I connected the rear brake caliper
It would be good to go the rear wheel on a lathe na sou makes a bottom to press the disc brake so you will not have to eat the scissors.
Thank you. You are technically doing this job. You are number 1. I could not figure out why you boiled the mechanism. Thanks for enlightening.
Thank you okan!!!
power! sana nasa davao ka para makapag pagawa din ako
Well done. Great chefs👌👌👌 job
Thank you very much!!
Bang dimana saya bisa buat ini untuk motor ku ??
the best option for me is to make it yourself only you will do it today key no one will bother you don't want it detail
Untuk Ukuran Disk Berapah MM?
Hi ikro the same size as the front disc has
You are crazy I love your videos!
Neat theory, but hell no. Way too much riding on those boogery welds. Plus you really weaken that swingarm fab. Not fun if you hit a bump at 60mph and half your scooter falls off.
The original brake is more dangerous as it is than the one I have now. When you hit the back break, then on the front break is plus 30% and is more dangerous especially in wet roads, turns or bumps.
MB PATENTS You are supposed to always use front and rear. The CBS is 70% front, 30% rear. Ive got 14,000 miles on one 2018 pcx 150 and 1982 on the other 2018. Never had a issue. I mean im not a fan of drums at all, i like the disk idea, but combined brake aint bad. Lots of scoots run it.
The cbs 70%-30% works on cars only, when you are in a road that is wet for example you can't hit the back break and the front works too even if you don't want it at this point.
in the car the brake works 70% front 30% back to pcx it works 30% front and 70% rear upside down completely i believe it is very wrong for me.
Request For Vario,,,
paps san ka pwedeng puntahan at para mkapag pagawa din sayo ng ganyan
Φιλε μ έχεις κάποιο συνεργείο;
Ερασιτεχνικά ασχολούμαι
Το έχεις καιρό; Δουλεύει ωραία στο φρενάρισμα;
Το έχω 3 χρόνια ναι φρενάρει πολύ καλά και πολύ βολικό επίσης δεν δουλεύετε το μπροστινό φρένο το έχω καταργήσει το copy bride.
@@MBPATENTS τι εννοείς έχεις καταργήσει το μπροστινό φρένο? Το 70-30?
@@panagiwtisalexandridis4346 ναι το δείχνω και στο βίντεο.
Nice idea thank you!!!
Saan po ang location nyo po
The pcx should cone with dual disc brakes from the factory it would be so much better
Correct!!!
Nice video bro . Keep it up (y)
By the way
I just want to ask about its ecu ?
Have you tried to make any preventive measures to its Loosening issue to ecu socket ?
Thanks and God bless (y)
Hi Cheng DIY thanks I do not understand what the Ecu is?
@@MBPATENTS this one bro , i hope it can help , they said that it was because of loose connection thats why it was burned
th-cam.com/video/K1wFATXf7Dw/w-d-xo.html
Terbaik
And where ur location?
I live in Greece. I made this video for anyone who wants to do it. It's easy and the cost is very low.
I hope 1 day u teach me how to do that. Im newbie from philipines
Ur all videos i already watch it but i cant do :(
nice one
Вам надо идти в инженеры Хонда !
Большое спасибо брат!!!
Siang bos,mo saring dong,bisa pesan bos,arm dari kita
Thank you very much!!!
TOO LOUD MUSIC
it's free
Location sir
Greece
Yuu are the best????👍👍👍
Galing mo paps! New subs here! Bahala ka na sa ytc ko paps! Rs..
Είμαι Έλληνας και θέλω να κάνω ακριβώς αυτό!
Πώς μπορώ να επικοινωνήσω μαζί σου;;;
Εδώ facebook.com/moto.patents
@@MBPATENTS σου έστειλα εκεί
Mantap
Bisa bikinin breketnya gak bos
😁
Bisa pesen breket kalipernya gak gan😁
lool good bravoo
genio, crack!
No PPE no vice in place. Open welding crazy
I do not understand you?
@@MBPATENTS what safety equipment was the man using none
Mr JohnI really do not use a mask, I have something better than the mask so I can use both, I will announce it very soon, what a patent I thank you for, for your attention !! I love people who see the detail one of them is you respect !!!
I need you fix my scooter
Nmr hoy
Nmr hp