Nice job! But 37mV for one side, means 18.5 mV per Tube. I think It's too cold! If you set 37 mV per tube (74 mV per side) it's a more realist set. I put it mine 74 mV per side (37 mV per tube). Pin 1 adjust the bias for the 2 left tubes and pin 3 for the 2 right tubes.
@@CoreyTempleMusic Unfortunately yes. There are 2 pots to set the Bias in the JVM. Each pot set the Bias for 2 tubes. Right pot for the 2 tubes on the right. And the left pot for the 2 tubes on the left. So, if you set the Bias at 74 mV in one pot (let say read 74 mV on the right pin), each tube on the right will be set at 37 mV. The same at the other side. I have a doc the explain the entire process of how to set the Bias on the JVM 410 amp.
Los fusibles que reemplazo de la placa son los mismos en cuanto a valor como los de la entrada del amp o son de otro tipo?, gracias
Nice job! But 37mV for one side, means 18.5 mV per Tube. I think It's too cold! If you set 37 mV per tube (74 mV per side) it's a more realist set. I put it mine 74 mV per side (37 mV per tube). Pin 1 adjust the bias for the 2 left tubes and pin 3 for the 2 right tubes.
So I'm doing it wrong?
@@CoreyTempleMusic Unfortunately yes. There are 2 pots to set the Bias in the JVM. Each pot set the Bias for 2 tubes. Right pot for the 2 tubes on the right. And the left pot for the 2 tubes on the left. So, if you set the Bias at 74 mV in one pot (let say read 74 mV on the right pin), each tube on the right will be set at 37 mV. The same at the other side. I have a doc the explain the entire process of how to set the Bias on the JVM 410 amp.
I appreciate the info