I am trying to find if you can refound the ur 22 mk2 value Edition. It doesent work and its just frustrating. The Steinberg value edtion is the absolutely worst buy ive made. And i have tried to make it work for around 20 hours and in the end it did but then exporting problems and crashes are prone to happen. 160$ in the lake. If you want to have your dream crushed, buy this!
Maybe I'm wrong here...but when I followed the install order as per this video, it appeared that the Yamaha Steinberg UR22 driver ASIO was overwritten (or hidden??) when installing Cubase 9.5 AI AFTER the UR22? It took me a while to figure out that the only ASIO driver recognized (Win 7) in Cubase was the "Generic Low Latency ASIO", which appears to be installed during Cubase AI. And...unfortunately, the Generic Low Latency ASIO only recognized my laptop's internal microphones, and not the UR22. After hours of frustration, I uninstalled the UR22 tools (with CD), rebooted the laptop, then reinstalled the tools, including the Yamaha Steinberg USB driver (ASIO), which cleared up my 'missing connections' in INPUT and OUTPUT in Cubase. Sorry for the long note, but this might help others who experience similar issues in Cubase when installing at the same time as UR22 hardware.
Awesome advice...I had similar problem, similar frustration, but did what you suggested and Bingo, Cubase recognised my UR22C in INPUT & OTPUTS, and my NIS88 keyboard controller. Thanks so much for posting, Beryan
Hi, after you recorded a song, how do you synchronize the song with the video you've taken from your camera i.e. Canon camera? To make the sound clear and clean. I'm new cubase user. Thanks
can I use the interface to play together with a guitar and bass guitar and vocals with a mixer on an input of the interface with someone with a keyboard somewhere in the country and we using vst connect performer.
Hello yes, in that case we will recommend you to connect your mixer using the line inputs in the back. You will need to have the Pro version of Cubase to be able to use VST connect.
@@steinberg hello. You told me to use the line inputs on the back. But the interface have only line outputs. I mean with a mixer with 3 instruments and use the outputs from the mixer into the interface and by internet connext with a 4th person en the 4th person have the cubase pro. And I use vst connect performer to connect. Is that possible? And is the line 1 an stereo input? Thank you.
Do i have to connect something else on the back of the soundcard except the usb cable?( I just want to connect my guitar on the pc and hear my guitar through my man cable. I also use guitar rig 5).
I just buy one and hope works like u say xD. One question, when you connect the speakers minute 1:31 is a 1/4 TS or 1/4 TRS because i belive is a balanced output tnks
Hello, it has 2 XLR/TRS combo connectors for mic/line. You can find all detailed information on the following link: www.steinberg.net/en/products/audio_interfaces/ur_series/bundles/ur22mkii_recording_pack/ur22mkii_setup_examples.html
Is it possible to get the full song from this demo? I know the video is from late 2015 but I love this song. I would like the ready mixed song or the full project-files for Cubase. Thanks :)
hi sir thanks for tutorial i'm facing a problem with my cubase 9.. when i record my vocal on a separate track only vocal track recorder is on.. but its record above instrument as well with vocals.. i can't understand why its happening i wanna wanna record my vocal as well i wanna listen instrument same time but its record instrument as well on vocal track..please help me.
I installed newest drivers and connected a mic and headphones to the ur22mkII. Everyday multiple times the sound of the headphones "fades out" / Disappears randomly and comes back 3 seconds later. Why? Unuseable that way. What to do? Windows 10/Rode Procaster/Fethead/USBPower
I have a strange problem with Cubase 10. I can not record separate channels. when I'm trying to record something new on a single channel , the Cubase record all the channels together. I can not separate them. The mos strange is that it is recording the Metronome too.
Afer a year of great working i have awful sound on a cubase AI only! On any other program the UR is working just fine. when i plug monitoring/recording on track i have plate reverbeting feedback sound, and no reverb, delay or any other plug in is connected. I have reinstaled cubase, windows and cubase, but the problem is still there! Help please
Hi, you should've received a Download Access Code and with that code you will be able to download the software. Then you need to create a MySteinberg account and perform an activation to receive the activation code that will download your license. www.steinberg.net/en/mysteinberg.html
PLEASE HELP ME OUT, I m using this audio interface and the CUBASE AI 9.5, also the headphones and the condensed mic that come in the recording package . I m a beginner in music programming. MY problem is related with Audio recording. After I complete the drums and synths programming , when I try to record the vocal track I see that the whole other tracks get mixed with the vocal track automatically as if I have done the Audio MIXDOWN. This happens even when my headphones and speakers are muted to zero but does not occur when I record vocal in solo mode . so there is no doubts of sound leakage from headphones to microphones. Please let me know if its a configuration problems?????
bonjour j ai deja ma carte de son qui est installée dans mon ancien portable ,j ai acheté un autre portable acer aspire 3 avec windows 10 comment je fais pour transféfé ou installé a nouveau ma carte de son sur celui-ci ,merci
Hi there, will I be able to install Cubase AI to more than one computer? Cause I'll probably need it at home and additionally on the computer in our band practice room. Will this be possible with the one activation code? (I ask because I've also encountered problems with Cubase LE5 in this matter)
I bought a used UR22mkII, downloaded everything from the website and got the trial version of Cubase Elements - I can hear the guitar through my soundcard but I can't get Cubase to pick it up; the virtual amp does nothing and it won't lay down the track when I hit record... Really getting frustrated :/
Please help, I can't run file "steinberg download assistent" because of an error or corrupt even though I downloaded it via the web steinberg , i can't instal cubase AI free for windows
Hey, a few questions: 1.Can i connect a microphone, a guitar and a keyboard to it at the same time? 2.Is it ok if i connect a guitar to an effect and then connect the effect to the audio card? 3.If i use a guitar amplifier as a speaker, should i connect it through one of the left/right jacks or the headphones jack? Thanks in advance!!!
Hi the UR22mkII only has two inputs, so you can only connect one mic and one guitar at the time, or one keyboard. A keyboard needs two inputs. A guitar is a mono instrument so it only needs one, same for the guitar. 2. It doesn't even matter. 3. You should use the Line Output, the headphones jack is as it names says it for headphones ;)
Thank you so much for the quick reply!!! what do you mean by one keyboard? i bought it 1 hour ago, and connected my keyboard and a mic at the same time and it works perfectly! im connecting the keyboard via its output jack and using the hi-Z on it and it sounds spectacular! and yes using the line output does make more sense(and sounds better). thank you so much, your product is awesome!(from the 30 min of use ive had with it so far haha) :))
Hi, perhaps you are connecting your Keyboard with MIDI, in that case, yes you can connect both, yes you can also connect it if you only use the L Out of the keyboard, but then you will be connecting it as a MONO instrument, even though a Keyboard is a Stereo instrument ;) You do not need to use hi-Z on a Keyboard, as it is not a high impedace instrument like a guitar.
I've got Roland TD-11 e-drums and I'd like to do the best recording possible with it. I've been told I might need an Audio Interface and have been recommended Steinberg UR22. However, I still do not fully get how it would work out for me, i.e. do I need that primarily to record drums in MIDI or do I need to to achieve highest quality recording of the sounds built in my drums module? Can you please help me out here as I'm still facing a conundrum?
Hello, it depends on what you want to do, if you want to record the sounds of your Roland TD, then we do recommend you to have an external audio interface to connect your outputs into the UR22. You can also connect the Roland to the computer directly via USB and only record MIDI and then use a software like E.g. Groove Agent 4 to playback the MIDI and replace the sounds with your preferred library. An audio interface works as an analog to digital and digital to analog converter. If you want to start recording it is the way to go.
Thank you for your reply. I was wondering also if I get a copy of Steinberg's Cubase DAW if I buy the UR22 interface? Or it comes only with some demo / limited functionality recording software? thanks
Hello, what do you mean, it is actually the other way around the software should recognise the device... please read the following article it might help you get set up: www.steinberg.net/en/support/knowledgebase_new/show_details/kb_show/setting-up-a-driver-for-audio-output-pc-windows.html
hlo...my os currently on windows (7) 32 bit..my soundcard ur 44.. cubase ai downloaded..but require 64 bit...my all plugins are in 32 bit..so plz help suggestion .....
Hey, i am using the device on a linux o(ubuntu 18.04) and was wondering if the fact that there is no option to safely remove it(like in windows) and me disconnecting it might be harmful for it. thanks in advance :)
I have the UR22 mkI, and I'm using Cubase elements 9.5, but there is no drop down menu for Devices, and for audio connections, it only shows my Yamaha MX 49. I have the driver installed and my computer recognizes it. And for MIDI, the Instrument track recognizes the inputs on the back But for some reason I can't set the audio track to recognize either of my inputs anr recieve my Mic. Suggestions?
Hello, since Cubase Pro 9 and Cubase Pro 9.5 the Devices menu has been replaced with Studio, so some of this videos might be misleading, you need to go to Studio > Studio Setup and there you can select the ASIO driver for your audio interface. To setup your VST connections you need to go to: Studio > Audio Connections.
But I don't WANT to set up VST connections. I HAVE VST connections. The MIDI side of it already recognizes the MIDI inputs. I'm talking about the AUDIO side! I HAVE both drivers set up, but NEITHER of them are picking up from my XLR inputs! I can't get any signal from my MICROPHONE!
If it was just this simple... :( 1. Cubase has no "Devices" menu. (I know, it is now hidden somewhere in "studio") 2. No Steinberg UR22 found. 3. Downloaded the driver. 4. The river says I shoudl install some Yamaha USB driver. After this it is working pretty ok.
I have installed the latest driver and firmware on my Mac and on the device, but the sound is awful. It has no highs at all and the volume is very low. Is there a compatibility problem with 10.13.3 High Sierra? I am very disappointed, because my device did not work without problems with Windows either, however it is not faulty - regarding to the seller.
hi! I just bought this interface and i downloaded cubase properly.. the thing is that I cant record.. i listen to my guitar and vocals in the monitors headphones but cubase does not record any sound at all.. help please
Bought my steinberg 4 days ago and suddenly I can't get signal to any of the two ports. I changed nothing since yesterday (no connections, nothing). I also keep it unplugged while I'm not using it. Can someone please tell me what am I doing wrong?
Someone please help. Once I’ve typed in my activation code it says it’s valid but then says “ A connection to the license server could not be established, Because the license server is not currently available bracket e.g. due to maintenance work bracket. Please try again later, or contact your software is the vendor support department in the case the problem persists” Please help
Master is always master.....hats off Steinberg....tnks
I am trying to find if you can refound the ur 22 mk2 value Edition. It doesent work and its just frustrating. The Steinberg value edtion is the absolutely worst buy ive made. And i have tried to make it work for around 20 hours and in the end it did but then exporting problems and crashes are prone to happen. 160$ in the lake. If you want to have your dream crushed, buy this!
thx So Much
I think it's going to help me improvising with that jewel. thank you very much!
1:37 I dont have these on the back of my speakers, is there any other way to get sound or do I have to buy new speakers?
Thank you sm I’m looking forward to recording some of my own music!
How are the drivers?
After reading terrible reviews on the focusrite drivers, I've been looking more at steinberg and behringer.
Maybe I'm wrong here...but when I followed the install order as per this video, it appeared that the Yamaha Steinberg UR22 driver ASIO was overwritten (or hidden??) when installing Cubase 9.5 AI AFTER the UR22? It took me a while to figure out that the only ASIO driver recognized (Win 7) in Cubase was the "Generic Low Latency ASIO", which appears to be installed during Cubase AI. And...unfortunately, the Generic Low Latency ASIO only recognized my laptop's internal microphones, and not the UR22. After hours of frustration, I uninstalled the UR22 tools (with CD), rebooted the laptop, then reinstalled the tools, including the Yamaha Steinberg USB driver (ASIO), which cleared up my 'missing connections' in INPUT and OUTPUT in Cubase. Sorry for the long note, but this might help others who experience similar issues in Cubase when installing at the same time as UR22 hardware.
Awesome advice...I had similar problem, similar frustration, but did what you suggested and Bingo, Cubase recognised my UR22C in INPUT & OTPUTS, and my NIS88 keyboard controller. Thanks so much for posting, Beryan
Hi, after you recorded a song, how do you synchronize the song with the video you've taken from your camera i.e. Canon camera? To make the sound clear and clean. I'm new cubase user. Thanks
Tks pro
whats the 48V for? 🧐
What mic do u use it for this interface?
Hi there! What's the difference between UR22 and UR22mkII? I have the first one!
+Glorian Gray It seems the mkII has interface to iPad. This seems to be the only noteworthy difference.
+klaar nou there are still some differences. Here is comaprison: www.steinberg.net/en/products/audio_interfaces/ur_series/models.html
+klaar nou ....power adapter to be able to power the device and use it with an iPad and a LE version of Cubasis
can I use the interface to play together with a guitar and bass guitar and vocals with a mixer on an input of the interface with someone with a keyboard somewhere in the country and we using vst connect performer.
Hello yes, in that case we will recommend you to connect your mixer using the line inputs in the back. You will need to have the Pro version of Cubase to be able to use VST connect.
@@steinberg hello. You told me to use the line inputs on the back. But the interface have only line outputs.
I mean with a mixer with 3 instruments and use the outputs from the mixer into the interface and by internet connext with a 4th person en the 4th person have the cubase pro. And I use vst connect performer to connect. Is that possible? And is the line 1 an stereo input? Thank you.
My active code is not except the caution said the code is only used one time so how I can get a new active code
2:35 where is the interface serial number ? Please tel me
Hi, under the audio interface, just pick it up and turn it around.
Hello sir I din't get access Code so far . Where can I get it? Pls help is it inside the book of interface?
Hello, in that case please get in contact with the official support, through your MySteinberg account/
please help. i connected my steinberg but my cubase couldn't detect. it says "no drivers / built in mic" in studio setup > VST audio system...
help?
Might be many things. I remember it was uncheck or check one box. did You manage to fix it?
Is the CD-Rom necessary to install.. Otherwise I have to buy the apple usb super drive or ..? :(
(The beta key) I am facing this problem, please there is a solution
Do i have to connect something else on the back of the soundcard except the usb cable?( I just want to connect my guitar on the pc and hear my guitar through my man cable. I also use guitar rig 5).
I just buy one and hope works like u say xD.
One question, when you connect the speakers minute 1:31 is a 1/4 TS or 1/4 TRS because i belive is a balanced output
tnks
Hello, it has 2 XLR/TRS combo connectors for mic/line. You can find all detailed information on the following link: www.steinberg.net/en/products/audio_interfaces/ur_series/bundles/ur22mkii_recording_pack/ur22mkii_setup_examples.html
If I use Latency-free hardware monitoring can I hear stereo or mono sound?
Is it possible to get the full song from this demo? I know the video is from late 2015 but I love this song. I would like the ready mixed song or the full project-files for Cubase. Thanks :)
hi sir thanks for tutorial i'm facing a problem with my cubase 9.. when i record my vocal on a separate track only vocal track recorder is on.. but its record above instrument as well with vocals.. i can't understand why its happening i wanna wanna record my vocal as well i wanna listen instrument same time but its record instrument as well on vocal track..please help me.
Do I get a discount?
Where can we hear the full song or is it possible to download the project for cubase somewhere?
I installed newest drivers and connected a mic and headphones to the ur22mkII. Everyday multiple times the sound of the headphones "fades out" / Disappears randomly and comes back 3 seconds later. Why? Unuseable that way. What to do? Windows 10/Rode Procaster/Fethead/USBPower
Who is better in terms of tatency on mixing (production) UR22 MKII or Focusrite Scarlett 2i2? Thanks!
David Estrelinha get the UR22
can i install cubase on my laptop, and later download and install it again on my pc?
I have a strange problem with Cubase 10.
I can not record separate channels. when I'm trying to record something new on a single channel , the Cubase record all the channels together. I can not separate them. The mos strange is that it is recording the Metronome too.
Afer a year of great working i have awful sound on a cubase AI only! On any other program the UR is working just fine. when i plug monitoring/recording on track i have plate reverbeting feedback sound, and no reverb, delay or any other plug in is connected. I have reinstaled cubase, windows and cubase, but the problem is still there!
Help please
Where can I see where this activation code is written?
Hi, you should've received a Download Access Code and with that code you will be able to download the software. Then you need to create a MySteinberg account and perform an activation to receive the activation code that will download your license. www.steinberg.net/en/mysteinberg.html
This updated Cubase does not have a Device Menu... this is where am stuck. How do I proceed with this version of Cubase?
Hi, go to Studio > Audio connections and you will finish on the same window.
PLEASE HELP ME OUT, I m using this audio interface and the CUBASE AI 9.5, also the headphones and the condensed mic that come in the recording package . I m a beginner in music programming. MY problem is related with Audio recording. After I complete the drums and synths programming , when I try to record the vocal track I see that the whole other tracks get mixed with the vocal track automatically as if I have done the Audio MIXDOWN. This happens even when my headphones and speakers are muted to zero but does not occur when I record vocal in solo mode . so there is no doubts of sound leakage from headphones to microphones. Please let me know if its a configuration problems?????
bonjour j ai deja ma carte de son qui est installée dans mon ancien portable ,j ai acheté un autre portable acer aspire 3 avec windows 10 comment je fais pour transféfé ou installé a nouveau ma carte de son sur celui-ci ,merci
Thank you very informational. going to switch to your products after focusrite failed me.
Do I need an adapter to connect my guitar? Or just the standart guitar cable
Hi, just the standard mono guitar cable.
Hello ! CONVERTISSEUR - CALIBRAGE ? Tank you
If I uninstall asio duplex that with my cubase 5 .. any prblm ?
Hi Avi, we're really sorry, but we can't help you here as Cubase 5 has not been technically supported for years.
@@steinberg can't understand..
Who can help me ? Whr i contract
Hi there, will I be able to install Cubase AI to more than one computer? Cause I'll probably need it at home and additionally on the computer in our band practice room. Will this be possible with the one activation code? (I ask because I've also encountered problems with Cubase LE5 in this matter)
I bought a used UR22mkII, downloaded everything from the website and got the trial version of Cubase Elements - I can hear the guitar through my soundcard but I can't get Cubase to pick it up; the virtual amp does nothing and it won't lay down the track when I hit record... Really getting frustrated :/
Please help, I can't run file "steinberg download assistent" because of an error or corrupt even though I downloaded it via the web steinberg , i can't instal cubase AI free for windows
Where can I get some sweet Yamaha quarter inch cables??
Hey, a few questions:
1.Can i connect a microphone, a guitar and a keyboard to it at the same time?
2.Is it ok if i connect a guitar to an effect and then connect the effect to the audio card?
3.If i use a guitar amplifier as a speaker, should i connect it through one of the left/right jacks or the headphones jack?
Thanks in advance!!!
Hi the UR22mkII only has two inputs, so you can only connect one mic and one guitar at the time, or one keyboard. A keyboard needs two inputs. A guitar is a mono instrument so it only needs one, same for the guitar. 2. It doesn't even matter. 3. You should use the Line Output, the headphones jack is as it names says it for headphones ;)
Thank you so much for the quick reply!!!
what do you mean by one keyboard? i bought it 1 hour ago, and connected my keyboard and a mic at the same time and it works perfectly! im connecting the keyboard via its output jack and using the hi-Z on it and it sounds spectacular!
and yes using the line output does make more sense(and sounds better).
thank you so much, your product is awesome!(from the 30 min of use ive had with it so far haha) :))
Hi, perhaps you are connecting your Keyboard with MIDI, in that case, yes you can connect both, yes you can also connect it if you only use the L Out of the keyboard, but then you will be connecting it as a MONO instrument, even though a Keyboard is a Stereo instrument ;) You do not need to use hi-Z on a Keyboard, as it is not a high impedace instrument like a guitar.
Do I need to connect the quarter inch cables? I don't have anything to connect them to....
Hi, it depends on what you are trying to record or do with the interface...
Steinberg Hi, I got it. Thanks anyway!
I've got Roland TD-11 e-drums and I'd like to do the best recording possible with it. I've been told I might need an Audio Interface and have been recommended Steinberg UR22. However, I still do not fully get how it would work out for me, i.e. do I need that primarily to record drums in MIDI or do I need to to achieve highest quality recording of the sounds built in my drums module?
Can you please help me out here as I'm still facing a conundrum?
Hello, it depends on what you want to do, if you want to record the sounds of your Roland TD, then we do recommend you to have an external audio interface to connect your outputs into the UR22. You can also connect the Roland to the computer directly via USB and only record MIDI and then use a software like E.g. Groove Agent 4 to playback the MIDI and replace the sounds with your preferred library. An audio interface works as an analog to digital and digital to analog converter. If you want to start recording it is the way to go.
Thank you for your reply. I was wondering also if I get a copy of Steinberg's Cubase DAW if I buy the UR22 interface? Or it comes only with some demo / limited functionality recording software?
thanks
Hello, you will get a copy of Cubase AI which is not a demo or trial version but it does have limited features.
I choose the model of my sound card but the program does not come out
I've installed drivers and plugged it in to my computer, but the device still does not recognize the software....any suggestions?
Hello, what do you mean, it is actually the other way around the software should recognise the device... please read the following article it might help you get set up: www.steinberg.net/en/support/knowledgebase_new/show_details/kb_show/setting-up-a-driver-for-audio-output-pc-windows.html
No offense but did this guy sound a bit like text-to-talk? Those robots that say what u tell them to say?
Matt Smith yes he sounds like them but hes Speaking too fluid, so..
hlo...my os currently on windows (7) 32 bit..my soundcard ur 44.. cubase ai downloaded..but require 64 bit...my all plugins are in 32 bit..so plz help suggestion .....
Hi, Cubase AI 9 is only 64 bits, your only option is to upgrade your OS to the 64 bit version.
Oh...any option to convert vst plugins to 64 bit?
How to find my serial number? I dont know where or how to find
Hey, i am using the device on a linux o(ubuntu 18.04) and was wondering if the fact that there is no option to safely remove it(like in windows) and me disconnecting it might be harmful for it.
thanks in advance :)
With the loopback feature can I stream my DAW while playing guitar and singing live through it?
Hello, yes, you should be able to do that.
in the midi port setup it says the ur22mk2 is inactive..... why? ive been trying for a week now i cant take this anymore
I have the UR22 mkI, and I'm using Cubase elements 9.5, but there is no drop down menu for Devices, and for audio connections, it only shows my Yamaha MX 49. I have the driver installed and my computer recognizes it. And for MIDI, the Instrument track recognizes the inputs on the back
But for some reason I can't set the audio track to recognize either of my inputs anr recieve my Mic. Suggestions?
Hello, since Cubase Pro 9 and Cubase Pro 9.5 the Devices menu has been replaced with Studio, so some of this videos might be misleading, you need to go to Studio > Studio Setup and there you can select the ASIO driver for your audio interface. To setup your VST connections you need to go to: Studio > Audio Connections.
But I don't WANT to set up VST connections. I HAVE VST connections. The MIDI side of it already recognizes the MIDI inputs.
I'm talking about the AUDIO side! I HAVE both drivers set up, but NEITHER of them are picking up from my XLR inputs! I can't get any signal from my MICROPHONE!
If it was just this simple... :(
1. Cubase has no "Devices" menu. (I know, it is now hidden somewhere in "studio")
2. No Steinberg UR22 found.
3. Downloaded the driver.
4. The river says I shoudl install some Yamaha USB driver.
After this it is working pretty ok.
I have installed the latest driver and firmware on my Mac and on the device, but the sound is awful. It has no highs at all and the volume is very low. Is there a compatibility problem with 10.13.3 High Sierra? I am very disappointed, because my device did not work without problems with Windows either, however it is not faulty - regarding to the seller.
Is the hi-z input clipping issue solved in the Mk2?
HI, yes it is. It was also solved on the MKI with a firmware update.
hi! I just bought this interface and i downloaded cubase properly.. the thing is that I cant record.. i listen to my guitar and vocals in the monitors headphones but cubase does not record any sound at all.. help please
Hello, you should watch the following video to get started: th-cam.com/video/rK2_8QUYjfA/w-d-xo.html
Bought my steinberg 4 days ago and suddenly I can't get signal to any of the two ports. I changed nothing since yesterday (no connections, nothing). I also keep it unplugged while I'm not using it. Can someone please tell me what am I doing wrong?
The same problem . Just usb light blinking
Do you need cubase ai to make the audio interface work?
No, this interface works with any cubase version.
Someone please help. Once I’ve typed in my activation code it says it’s valid but then says
“ A connection to the license server could not be established, Because the license server is not currently available bracket e.g. due to maintenance work bracket.
Please try again later, or contact your software is the vendor support department in the case the problem persists”
Please help
where do I find the serial number of my interface?
Hello, underneath the audio interface.
+Steinberg thanks!
Steinberg sorry but is there a german Version of this tutorial?
Steinberg thanks
can you use it on a Samsung Chromebook?????
Hello, no, as it doesn't cover the minimum system requirements: www.steinberg.net/en/products/cubase/resources.html
Im having troubles downloading the Cubase Pro 9
Which is no use without a steinberg dongle.
please help. I know very little about computers. I just want to multi track studio on my Chromebook
I can't download
I'm completely beginner and I'm completely confused
Hello Sir, I buy steinberg ur22 mkii yesterday, can I used activation code for Cubase 10 ai??
Hello, yes you can. Just log-in to your MySteinberg account and follow the activation process.
Why is she on the floor on a Saturday night
Haha
its midi latancy free
help me
I think the narrator is Canadian. His MOUTH diphthong sounds Canadian.
on steam i can download things as many times as i want on my account. cubase is just one single time, thats so uncool.
Why is he whispering LOL.