Not this version this tabletop is made for a fixed router motor for a router table so they make the motor themselves as I showed you also he brand bosch and all there will fit but not the triton. I had that set up before I had this. I used that with one of the plates that they sell so you can mounted on the bottom of the plate that works fine as well if you need more information, let me know so I can help you out.
I have 90% of your rig. I have the motor table fence and micro adjuster. I do not have the phenolic inserts. So my question is in regards to the phenolic inserts. Are those inserts "flatter and more precise than the factory "plastic" inserts. On the down side my spindle had a 1/2 collet nut and collet that are too tight to accept any 1/2 bits. I have a CNC machine which uses the ER20 but they didnt seem to want to thread on I didnt put any force as I do not want to cross thread a brand new spindle. The last down side is I have been waiting a full week for a response from Jessem about my 1/2 Collet and nut. That has been disappointing for such a premium product. I had the digital guage on my rig , mine developed a static charge issue and it doesn't hold a measurement any longer. when it croaked I was kind of upset but at the end of the day I do not miss it and I am not worried about it . I removed the bracket and I haven't looked back. Hopefully Jessem will honor there product and get in touch with me soon most of my bits are 1/2 .. Thank you for making the video This Jessem rig is some top notch equipment .
this set up is indeed one of the best set ups you can get and the inserts are also quite spectacular. I like them more than the standard ones that’s why I upgraded to this version.
Thanks for the video. I'm planning to go with Jessem for my router table. Very well presented with lots of good information. FYI, gauge rhymes with page. You helped us, hopefully I can help you with your pronunciation of that strange word.
Many thanks for your feedback about my video. I’m definitely wanting to make a video about joining. What would be joinery that you want to see in that video Shaker style doors?
Some have said the phenolic top Marrs and scratches easily, I guess it depends on the work your doing. If you could only afford 1- motor , 2- fence 3 - lift , which of the three would you say is indispensable over a cheap alternative. I mean where should the money go first ? Could I build my fence, and get a lot done anyway. I’m considering incra lift and the motor you have, and build up to a good fence , and dust system later. I’ve heard so many say you never really need to buy all the top end kit… but.. it’s accuracy, and ease and repeatability you get with the top end full system you have it seems. I don’t want to cheap out on a new router, I like the idea of a dedicated unit that will stay in the table. I hate faffing around, and fiddling to get the results I want. Would appreciate your thoughts on my ramblings lol
@@CURZONDAVIDI would choose this fence and a high-quality lift. Finally, I would opt for the motor. Accuracy is crucial in these components, and power can be managed with multiple passes. Therefore, this would be my preference.
![[UNCUT] “บอสณวัฒน์” ลากไส้!! ใครหนุนหลัง "แม่ตั๊ก ป๋าเบียร์" I คนดังนั่งเคลียร์ I 30 ก.ย. 67](http://i.ytimg.com/vi/QlD7mU2KKRk/mqdefault.jpg)
Nice video! Im having the same router and lift, not the table and fence. Really love all the accesoiries!
thanks and the add ons are great indeed
Can jassem insert plate accept triton router I,e tra001? Thank you
Not this version this tabletop is made for a fixed router motor for a router table so they make the motor themselves as I showed you also he brand bosch and all there will fit but not the triton. I had that set up before I had this. I used that with one of the plates that they sell so you can mounted on the bottom of the plate that works fine as well if you need more information, let me know so I can help you out.
I have 90% of your rig. I have the motor table fence and micro adjuster. I do not have the phenolic inserts. So my question is in regards to the phenolic inserts. Are those inserts "flatter and more precise than the factory "plastic" inserts. On the down side my spindle had a 1/2 collet nut and collet that are too tight to accept any 1/2 bits. I have a CNC machine which uses the ER20 but they didnt seem to want to thread on I didnt put any force as I do not want to cross thread a brand new spindle. The last down side is I have been waiting a full week for a response from Jessem about my 1/2 Collet and nut. That has been disappointing for such a premium product. I had the digital guage on my rig , mine developed a static charge issue and it doesn't hold a measurement any longer. when it croaked I was kind of upset but at the end of the day I do not miss it and I am not worried about it . I removed the bracket and I haven't looked back. Hopefully Jessem will honor there product and get in touch with me soon most of my bits are 1/2 ..
Thank you for making the video This Jessem rig is some top notch equipment .
this set up is indeed one of the best set ups you can get and the inserts are also quite spectacular. I like them more than the standard ones that’s why I upgraded to this version.
Marvelous video. Exactly what I was looking for. I’m deciding between this table or the woodpeckers one. Thank you. Cheers from Chicago!
That is great to here! And thanks for your feedback
Thanks for the video. I'm planning to go with Jessem for my router table. Very well presented with lots of good information. FYI, gauge rhymes with page. You helped us, hopefully I can help you with your pronunciation of that strange word.
Many thanks for your feedback. I will definitely keep your tip in my mind.
Appreciate the video. Didn't know about the micro fence adjuster...just ordered one. Thanks!
Thank for your support and feedback micro adjust is great to have
Thanks for this video. Can you demonstrate joinery routing with this table in one of your videos? Cabinet doors preferably.
Many thanks for your feedback about my video. I’m definitely wanting to make a video about joining. What would be joinery that you want to see in that video Shaker style doors?
That looks very impressive but seems prohibitively expensive in Germany. I may still end up buying some parts of it.
Fence is my favorite. In the Netherlands is a dealer as well
I bought a small spindle moulder and a cheap power feed it takes up the same amount of room as this table and costs less.
Yes 100% good solution and with a decent setup gauge you can have a great setup! Good luck 🍀
JessEm has fantastic customer service. Huge fan.
I can only confirm that the are really hely
How are you liking the set up, I’m looking at the Jessem motor, happy ??
Yea very impressive motor stable and strong especially with the table top. It is a really good combination.
Some have said the phenolic top Marrs and scratches easily, I guess it depends on the work your doing.
If you could only afford 1- motor , 2- fence 3 - lift , which of the three would you say is indispensable over a cheap alternative.
I mean where should the money go first ? Could I build my fence, and get a lot done anyway. I’m considering incra lift and the motor you have, and build up to a good fence , and dust system later.
I’ve heard so many say you never really need to buy all the top end kit… but.. it’s accuracy, and ease and repeatability you get with the top end full system you have it seems.
I don’t want to cheap out on a new router, I like the idea of a dedicated unit that will stay in the table.
I hate faffing around, and fiddling to get the results I want.
Would appreciate your thoughts on my ramblings lol
@@CURZONDAVIDI would choose this fence and a high-quality lift. Finally, I would opt for the motor. Accuracy is crucial in these components, and power can be managed with multiple passes. Therefore, this would be my preference.
Cheers
Nice video dcreations!
Thanks