Infinity Tools and Lee Valley both have it in stock. I bought the Jessem lift II this past February, and never looked back. Great lift - from the leveling screws to the tensioning, to the fact that it's a standard plate size...
I am curious what happen with your router motor, the one with an external speed controller? Almost bought one but guess it had problems. Guessing it's gone for good?
I just bought the JessEm ( literally just, this afternoon ) after a lot of looking at this and that. From what you show me here I made the right choice. Thanks.
Thank you for the review. The rockler lift was one I've been considering, but I'll be giving that a second thought after the mention of the way the clamping works.
JessEm was the innovator of this style of router lift. Would you rather go with the innovator or the copier? And JessEm's machining on all of their products is superb. You won't be disappointed with JessEm.
@@FirstFruitsDesignCo I can only utilize half of my two car garage for my woodworking stuff so I added a half-width cabinet at the end of my miter station that SHOULD work well for a router lift. It looks like a regular cabinet but the top "drawer" is really just a fascia piece that will hide a dust collector box for the lift. Of course that's the plan... but I'm still very new at this so my plans don't always work out yet 😅
I'm not sure but if I had to guess you liked the little push button release for the rings. I gotta give it to you, you stuck to your guns. Liking the pretty blue rings and the quick release button You are a true woodworker. On a serious note, thank you for noting these differences. I think JessEm has a new customer.
I’ve had the Jessem Master LiftII for about 5 years now and love it. It has 3 ‘v’ shaped clamps inside itself to hold the router which clamps very securely and no bending of the posts. I’m thinking it was a little over $300 at the time. Not 100% sure. I paired it with a Milwaukee 3 1/2 hp router variable speed. What a beast of a setup!!! I highly recommend this one!!!
Past experience with the Jessem mitre gage has been fantastic, one of the best engineered and built tools I’ve seen. Not surprised that the same seems true for the lifts
I'm about to build a new router table into my new work bench. I've been trying to decide which lift I wanted. This very helpful video just helped me decide. Gonna order the JessEm soon.
Wow. Thank you so much for this great review. I’m In a buy or build stage right now. Aww.. I may as well go to Rockler, get the cast iron table and their router lift. Then I saw your review. Tire screeching sound! May just spend the time making the table too.
Love the review. Had a hard time weeding through Kreg just couldn’t get over the non pro rep. Than like you Rockler loved the look and the pop off rings. Wines up I went with the Jess em. Bought the weekend warrior set up. Thanks for reassurance that I made the right pick.
I have the JessEm and love it! On the Rockler, I would get some shim stock from the auto parts store and shim the router in the clamp, that should stop the post flex and hold plenty solid.
OMG. He was killing me with his obsession with the pop-out rings! LMAO. (it is really cool though) it made it even funnier that the lady never broke out of character when he commented about the rings.
If the guide bushings are misaligned after installing the router, then you have over-tightened it. Either shim the router with tape to fill the gap, or purchase the correct collar.
Love the review. I have been eyeballing a JessEm router lift. Especially now that JessEM just released their own Pow-R-TeK SR Router motor with variable speed control. Rockler has some cool tools but its hard to beat JessEm on this one.
I agree! I love everything Rockler makes. Their innovation line is outstanding. Since we’ve made this video I’ve thought a lot about that, and I’m wondering if maybe Dewalt doesn’t have some share in the blame. I may purchase or borrow some other routers to test that theory.
Unless there is something new out, the Jessem motor went away some time back. Seemed to have some issues. Although, just looking at their website, guess it is back?
Good review :) I have never used the Rockler, but I have the Jessem Mast-R lift for Incra and it's amazing. So heavy duty, so smooth and so precise. It's a work of art. Have a Porter Cable 3-1/4" motor and it does just about anything. The Jessem is a pleasure to use. Plus Incra has magnetic plates, even better than a "button" :)
Thanx for an honest review. Just like you said I would have preferred "high prestige" aluminum inserts to "workmanlike" plastic. But, as you pointed out.. it does not actually matter in practice. Several years ago, my local Woodcraft store had the JessEm Router lift II on sale for $100 less) I could not see a reason to not get the JessEm. In the end I have been very satisfied with my JessEM router lift, and seeing your review convinces me I made the right choice. I spent less money for a superior product. My only (minor) issue with the JessEm is, the inserts are counter intuitive, in that to remove them they rotate clockwise..(maybe a "Canadian" thing)
Thanks for this! Just the info that I needed to decide between these two. Also looking at the Kreg, but it looks like just a variation of the Rockler…..
I do not have a router station as yet and that is because I am determined to wait until I can get the JessEm. There is no need to go to the trouble of building something with another brand only to have constant regret.
I just bought the JessEm Rout-R-Lift II from Lee Valley (~$300 CAD), which comes with 3 of the red inserts, not 10. I didn't watch this review first, but it makes me feel better about my choice! My plan is to build a router table top that I can slip onto my workmate (with the lift mechanism between the first and third planks), since my little shed isn't big enough for all the toys that I'd like. If that doesn't work, then I'll make a box for a table top setup instead.
I believe someone commented on a post we did last year saying they built it into their miter station outfeed table. Maybe I liked that idea and may do it in the future
@@FirstFruitsDesignCo I like that idea, but don't have the space for a miter station outfeed table (my entire "shop" is in an 8x10 shed that I can barely move around in.)
I have a cast iron table with an opening that fits the Rockler. After a half hour of searching I think my options are limited to Rockler and lifts that are made specifically for Rockler tables.
IMHO, Jessem makes some quality stuff. I have their lift and stock guides (both table saw and router). Love them. My biggest complaint about the Rockler... it is not a "standard" size plate and does not fit many available router tables tops like my cast iron extension table for my table saw. They kind of lock you into buying their tables. I like my stuff to be of standard sizing so I can mix and match parts.
Great review guys, I almost purchased the Rockler, but it does not fit my PC7518. I choose the INCRA Mast-R-Lift II. It’s by Jessem, but it included the INCRA 6-pc CleanSweep with magnetic lock. Although it cost more but it’s a higher quality and worth the price. It should be reviewed.
@@FirstFruitsDesignCo hey you guys are nice together and it was a fun video and answered my questions. I'm going with the JessEm and also I like the name of your design company, especially if it is referring to the 1st thing that popped into my head . . .
@@xxakli Awesome, so glad we could help! You’ll love the JessEm, and if you’re referring to the Biblical reference of First Fruits then you are correct.
Incra and Jessem are about the only wood working products I will buy without worrying about the quality. The incra Mast-r-Lift is a great combination of the Jessem (I believe) with incra innovation. No retarded button needed to release the plate, and no special tool needed, because they are magnetic. They also have a version of the plates that are ventilated to allow the shavings to be vacuumed out through the plate. I have found a lot of the products Rockler sells are not only Harbor Freight quality at best, but many times they are rebranded versions of the exact same thing harbor freight sells at a marked up price.
Hi guys! Great video thank you! I am currently in the market for router lift, I am new to wood working all this is a blur - your video was great has shared some light. Likewise I have a DeWalt trim router - here in Australia the model numbers are different DCW600/DCW604 - cordless with variable speed - I have short listed my router lift choice down to JessEm - the offical website sadly does not list my router. Great video, peace out - Ethan - Australia
Thanks, Ethan! I hope your woodworking adventure is rewarding and fulfilling! It has changed our lives for the better. One of my favorite craftsmen/artist/designer is from Australia, Pedulla Studios. Cheers!
Your video missed altogether the feature that I think is more important that anything else. The ability to lock the router position as adjusted, which the JessEm does provide. Without reaching under the table to lock or unlock.
I saw the Rockler design defect right from the start. What were they thinking? That pop-it plate release could be an issue also for an accidental operation while running a piece through. Not cool at all.
I actually checked these two out a while back. Came to the same conclusion plus that push button feature is cool, but a possible failure point. Is there a back up way yo release thise pretty blue rings. Also of note, the Jessem comes eith a blank insert so you can cut your own insrrt for your favorite bit. Also Jessem has a lot bigger selection of inserts. so you can find a size very close to the bit you are using. Great review!
Thanks for this review! I've been looking at the Rockler router lift. I've also been looking at the Kreg router lifter. Do you have any experience with it?
I have not used the Kreg. I’m sure it can get the job done though. I’m definitely super impressed with the JessEm though. If only it had that sweet sweet button ha ha!
Haha I’m not the only one that loves the button. Every time I’m in the store I have to go push it. It’s too cool lol. I went with the Kreg and I’m happy with it. I don’t remember what I paid for it but it seems like I paid over 300.
I purchased the Kreg router table with fence system. I reviewed many router lift systems and decided to go with Rockler Pro Lift Router Lift - 9-1/4'' x 11-3/4'' Large Router Plate. This was a $400 purchase, but looked to be the best built lift. As I tried to bring the combination together the Rockler plate fit the Kreg table just fine. Now for the problems. I had an older Ridgid 2.5 hp router with variable speed. It did not fit the Rockler Pro Lift Router Lift. After many phone calls I was told I needed to purchase an adaptor, I made an additional purchase. I called Rockler tech support when my router still did not fit. I was told to widen the base and fit the router with adaptor in. While on phone to tech support the base plate "cracked" broke when enlarging too much. I packaged the whole system up and sent it back to Amazon. I then purchased the Kreg router lift system, {locally} which did allow my Ridgid router to fit with no problems. The Kreg router lift works smoothly and has no problems.
Do you remember when cars had a crank handle to roll the window up and down? If youre not using a computer controlled, motorized lift, then you're missing out. MLCS Woodworking has had a motorized lift for many years. Its hard to believe people still buy crank handle lifts when you can get a lift that accurately moves in .001" increments, has the ability to store position locations, can bring the router up to bit change position with the press of a button, can do plunge operations using the foot pedal, and on and on. You should review the PowerLift Pro from MLCS woodworking and forget that archaic stuff.
I failed to point that out in the video, but each of these lifts come with a guide bushing. It threads into the router plate and provides a point of contact for the material. You touch the material to the guide bushing and then pivot the material into the bit. Having a leverage point allows you to move the material into the bit at a slow and controlled rate as opposed to just moving the material with your hands. But I must say, you have a very keen eye!!!
I think a better and closer comparison would be the Rockler lift against the Incra Mast-R-Lift II that Incra built with Jessem. Both have aluminum tops and inserts. This video is comparing a metal setup to a phenolic/metal setup. Still like the video but it’s almost apples to oranges.
So I would agree it’s not a perfect comparison, as the features don’t compare evenly side by side, but as the base model lift from each company and the ones I happened to spend my money on, it ended up being what we had to compare. I really appreciate your input though and should the day come where we can compare the Rockler PRO and Incra one we definitely will!
Of these 2 the JessEm is definitely the best, I also looked at the Kreg and it too is far superior to the Rockler.. Is the JessEm better than the Kreg ?? I don't know, but for 40% less US $$ I bought the JessEm and it was (is) the right choice for me, I've had it for a few years now.. It still operates like the day I put it in service.
I would never buy another phenolic insert plate. I got the $250 kreg router table and the plate was terribly bowed to the center. Had them send a replacement "precision" router plate. Still bowed. Couldn't even flatten them out with a CNC machine since they warped after cutting. Save yourself the hassle and get a beefy aluminum or steel version and check it with a straight edge before installing.
Rockler is expensive compared to other router lifts especially if its restricted to rockler units, I love kreg, jessem has many units choice becomes a problem and shipping to Uganda from Canada is way out of order.
I know what you mean about adjusting but depth on the Rocker lifts. For the kind of money they charge for those you would think they would be better built.🙄
It would scare me to death to somehow accidentally press that button, and ring pops up with raised panel bit spinning at 10000 RPM. It wouldn't be pretty. Surprised there is not a safety cover for that button.
That’s how I make my spinach and aluminum smoothies! In all seriousness, you’re right. I didn’t even think about that. It’s not outside the realm of possibility and would be a very ugly event.
Totally agree with that though- as was thinking the same. Router dust building up in cavity and the pushing wood along bit…….. boom- ring comes up and I don’t like to be thinking of that happening. Routers are scary enough.
Dam, I am getting ready to buy the Rockler because I have a Rockler top, the opening is the 8.25. I always liked the Jessel better but routing additional inch on top is scary. Problem is that I have the Dewalt 616 and now u tell me it is a issue… DAM IT!!
I had replied to another comment earlier today, and with as much great stuff as Rockler makes, I’m wondering if the issues didn’t stem from the routers. I think I’ll try and get my hands on a few other brands and see if the issue persists
@@FirstFruitsDesignCo Ok so Rockler is telling me that the DW616 should have come with a "plastic shim" in the box that is used to make this router fit. I looked in the box, still have it, no plastic piece. I reached out to DW repair center and the guy could not find.
@@frankrodriguez6424 that’s the first I’m hearing of it. I didn’t have any shim in any of the Dewalt routers I purchased. Sorry that you’re having your own difficulties as well.
Of course, a year and a half later, the JessEm lift in the video is no longer available, on Amazon. 🙁
I wonder if they are having a hard time keeping up with demand or if they are phasing it out for an improved version. What are your thoughts?
Infinity Tools and Lee Valley both have it in stock. I bought the Jessem lift II this past February, and never looked back. Great lift - from the leveling screws to the tensioning, to the fact that it's a standard plate size...
I just bought one. Not hard to find. Even Amazon.
We're listening! Great review guys.
Yeeeesssssss!!!
I am curious what happen with your router motor, the one with an external speed controller? Almost bought one but guess it had problems. Guessing it's gone for good?
@@RonKillian they just came out with a new model (Pow-R-Tek SR). Completely redesigned and looks awesome
JessEm tools don't seem to be easily obtained in Australia.
@@wiseoldfool That's because you live in a communist slave colony.
I own the Jessem Master R lift. Absolutely love it..!
Thank you for comparing these two side by side. I'll be now know comparing JessEm to Kreg. Great well done video.
Thank you! Glad it helped.
I just bought the JessEm ( literally just, this afternoon ) after a lot of looking at this and that. From what you show me here I made the right choice. Thanks.
You’ll not be disappointed!!!
Thank you for the review. The rockler lift was one I've been considering, but I'll be giving that a second thought after the mention of the way the clamping works.
I may even follow up with another video now that some time has passed.
Thank you for doing this review. I was on the fence and this really helped.
Awesome! That makes it all worth it.
Great shootout. Thank you!
JessEm was the innovator of this style of router lift. Would you rather go with the innovator or the copier?
And JessEm's machining on all of their products is superb. You won't be disappointed with JessEm.
Couldn’t agree more. I plan to get the loose tenoning jig next.
Innovation doesn't always work that way bro. If you don't keep innovating, competition will outperform you
Good stuff, I just got the JessEm for Christmas from my lovely wife! I can't wait to integrate it into my miter stand!
You have an amazing wife, Sir! Also, maybe I’m just not well versed but I don’t think I’ve seen it built into a miter stand. What an amazing idea!
@@FirstFruitsDesignCo I can only utilize half of my two car garage for my woodworking stuff so I added a half-width cabinet at the end of my miter station that SHOULD work well for a router lift. It looks like a regular cabinet but the top "drawer" is really just a fascia piece that will hide a dust collector box for the lift.
Of course that's the plan... but I'm still very new at this so my plans don't always work out yet 😅
@@CordellWoodworks YOU GOT THIS!!!
I am really glad you guys made this video before I bought a router lift 😅
We’re here for you brother!
I'm not sure but if I had to guess you liked the little push button release for the rings. I gotta give it to you, you stuck to your guns. Liking the pretty blue rings and the quick release button You are a true woodworker. On a serious note, thank you for noting these differences. I think JessEm has a new customer.
I’ve had the Jessem Master LiftII for about 5 years now and love it. It has 3 ‘v’ shaped clamps inside itself to hold the router which clamps very securely and no bending of the posts. I’m thinking it was a little over $300 at the time. Not 100% sure. I paired it with a Milwaukee 3 1/2 hp router variable speed. What a beast of a setup!!! I highly recommend this one!!!
I’ve heard nothing but amazing things about the Master Lift. When it comes time for another table or upgrade I’ll definitely check that one out.
Is that the Milwaukee 5625 router?
@@sh0cktim3 yes. It’s the 5625-20
Past experience with the Jessem mitre gage has been fantastic, one of the best engineered and built tools I’ve seen. Not surprised that the same seems true for the lifts
I'm about to build a new router table into my new work bench. I've been trying to decide which lift I wanted. This very helpful video just helped me decide. Gonna order the JessEm soon.
Awesome! You won’t be disappointed.
Wow. Thank you so much for this great review. I’m
In a buy or build stage right now. Aww.. I may as well go to Rockler, get the cast iron table and their router lift. Then I saw your review. Tire screeching sound! May just spend the time making the table too.
So glad our video helped. Making the table top was fun too!
Love the review. Had a hard time weeding through Kreg just couldn’t get over the non pro rep. Than like you Rockler loved the look and the pop off rings. Wines up I went with the Jess em. Bought the weekend warrior set up. Thanks for reassurance that I made the right pick.
So glad we could help!
I have the JessEm and love it! On the Rockler, I would get some shim stock from the auto parts store and shim the router in the clamp, that should stop the post flex and hold plenty solid.
I think you’re right! I didn’t discard it but it is collecting dust. Maybe I could do a fix video for it some day.
OMG. He was killing me with his obsession with the pop-out rings! LMAO. (it is really cool though) it made it even funnier that the lady never broke out of character when he commented about the rings.
Johnny went to counseling, and he’s in control of his ring addiction now. Ha ha
Thanks. Pretty Helpful I was thinking on the rockler. But now I know
Glad we could help!
If the guide bushings are misaligned after installing the router, then you have over-tightened it. Either shim the router with tape to fill the gap, or purchase the correct collar.
Love the review. I have been eyeballing a JessEm router lift. Especially now that JessEM just released their own Pow-R-TeK SR Router motor with variable speed control. Rockler has some cool tools but its hard to beat JessEm on this one.
I agree! I love everything Rockler makes. Their innovation line is outstanding. Since we’ve made this video I’ve thought a lot about that, and I’m wondering if maybe Dewalt doesn’t have some share in the blame. I may purchase or borrow some other routers to test that theory.
Unless there is something new out, the Jessem motor went away some time back. Seemed to have some issues. Although, just looking at their website, guess it is back?
Good review. Convinced me to go with Jessem
Thanks Darin! You’ll be happy with it!
Good review :) I have never used the Rockler, but I have the Jessem Mast-R lift for Incra and it's amazing. So heavy duty, so smooth and so precise. It's a work of art. Have a Porter Cable 3-1/4" motor and it does just about anything. The Jessem is a pleasure to use. Plus Incra has magnetic plates, even better than a "button" :)
Magnets would be very cool. I do love that button thought!
Thanx for an honest review.
Just like you said I would have preferred "high prestige" aluminum inserts to "workmanlike" plastic. But, as you pointed out.. it does not actually matter in practice.
Several years ago, my local Woodcraft store had the JessEm Router lift II on sale for $100 less) I could not see a reason to not get the JessEm. In the end I have been very satisfied with my JessEM router lift, and seeing your review convinces me I made the right choice. I spent less money for a superior product.
My only (minor) issue with the JessEm is, the inserts are counter intuitive, in that to remove them they rotate clockwise..(maybe a "Canadian" thing)
I noticed that too and just assumed there was a reason for it that I was unaware of
I need one of those buttons!
Come on down!
I would of liked to see the leveling process between the two. I have the Gen 1 lift from Rockler and very happy with its performance but no button.
Thanks for this! Just the info that I needed to decide between these two. Also looking at the Kreg, but it looks like just a variation of the Rockler…..
So glad we could be of help!
I do not have a router station as yet and that is because I am determined to wait until I can get the JessEm. There is no need to go to the trouble of building something with another brand only to have constant regret.
Well said. Thank you!
I just bought the JessEm Rout-R-Lift II from Lee Valley (~$300 CAD), which comes with 3 of the red inserts, not 10. I didn't watch this review first, but it makes me feel better about my choice!
My plan is to build a router table top that I can slip onto my workmate (with the lift mechanism between the first and third planks), since my little shed isn't big enough for all the toys that I'd like. If that doesn't work, then I'll make a box for a table top setup instead.
I believe someone commented on a post we did last year saying they built it into their miter station outfeed table. Maybe I liked that idea and may do it in the future
@@FirstFruitsDesignCo I like that idea, but don't have the space for a miter station outfeed table (my entire "shop" is in an 8x10 shed that I can barely move around in.)
@PeeterJoot I’m curious to hear what you do come up with!
Great video!
Great review and fun video!
Thanks so much! We always try and keep it fun!
The Rockler blue rings and pop out feature is awesome as well the adjustment of the bits... &Gimmick??? you decide?
I have a cast iron table with an opening that fits the Rockler. After a half hour of searching I think my options are limited to Rockler and lifts that are made specifically for Rockler tables.
IMHO, Jessem makes some quality stuff. I have their lift and stock guides (both table saw and router). Love them. My biggest complaint about the Rockler... it is not a "standard" size plate and does not fit many available router tables tops like my cast iron extension table for my table saw. They kind of lock you into buying their tables. I like my stuff to be of standard sizing so I can mix and match parts.
Great review guys, I almost purchased the Rockler, but it does not fit my PC7518. I choose the INCRA Mast-R-Lift II. It’s by Jessem, but it included the INCRA 6-pc CleanSweep with magnetic lock. Although it cost more but it’s a higher quality and worth the price. It should be reviewed.
A future video perhaps! So glad you enjoyed the video and that you are happy with your lift!
Hey I'm subscriber number 501, woohoo! I broke the500 ceiling!
Thank you!!!!!!
@@FirstFruitsDesignCo hey you guys are nice together and it was a fun video and answered my questions. I'm going with the JessEm and also I like the name of your design company, especially if it is referring to the 1st thing that popped into my head . . .
@@xxakli Awesome, so glad we could help! You’ll love the JessEm, and if you’re referring to the Biblical reference of First Fruits then you are correct.
@@FirstFruitsDesignCo Awesome! When I send a text or email to a client I sign off with a scripture address: Colossians 3:23
@@xxakli Love it!
Incra and Jessem are about the only wood working products I will buy without worrying about the quality. The incra Mast-r-Lift is a great combination of the Jessem (I believe) with incra innovation. No retarded button needed to release the plate, and no special tool needed, because they are magnetic. They also have a version of the plates that are ventilated to allow the shavings to be vacuumed out through the plate.
I have found a lot of the products Rockler sells are not only Harbor Freight quality at best, but many times they are rebranded versions of the exact same thing harbor freight sells at a marked up price.
Great comparisons!🎉 overall solid channel contents❤
Thank you so much, we really appreciate the feedback and glad you are enjoying the content!
Hi guys! Great video thank you! I am currently in the market for router lift, I am new to wood working all this is a blur - your video was great has shared some light. Likewise I have a DeWalt trim router - here in Australia the model numbers are different DCW600/DCW604 - cordless with variable speed - I have short listed my router lift choice down to JessEm - the offical website sadly does not list my router. Great video, peace out - Ethan - Australia
Thanks, Ethan! I hope your woodworking adventure is rewarding and fulfilling! It has changed our lives for the better. One of my favorite craftsmen/artist/designer is from Australia, Pedulla Studios. Cheers!
@@FirstFruitsDesignCo I am curious if your Dewalt trim router fits OK on the JessEM Rout-R-Lift 2?
The trim router does not fit on the JessEm. It would require a collar and at this point I don’t believe JessEm makes them for their lifts.
Your video missed altogether the feature that I think is more important that anything else. The ability to lock the router position as adjusted, which the JessEm does provide. Without reaching under the table to lock or unlock.
Excellent point!
I saw the Rockler design defect right from the start. What were they thinking? That pop-it plate release could be an issue also for an accidental operation while running a piece through. Not cool at all.
I didn’t have it pop out while operating (thank God), but it is a serious safety issue in my mind. Love the convenience, terrified of the potential.
The Jessem hands down.
I actually checked these two out a while back. Came to the same conclusion plus that push button feature is cool, but a possible failure point. Is there a back up way yo release thise pretty blue rings. Also of note, the Jessem comes eith a blank insert so you can cut your own insrrt for your favorite bit. Also Jessem has a lot bigger selection of inserts. so you can find a size very close to the bit you are using. Great review!
Things have changed, I no longer love the button.
Releasing the rings is very easy, which is why I don’t like them anymore.
Totally agree the JesEm is superior to the Rockler and I like Rockler products but this one goes to JesEm hands down. Thanks for the video…..
You’re so welcome. Thanks for watching and sharing!
Thanks for this review! I've been looking at the Rockler router lift. I've also been looking at the Kreg router lifter. Do you have any experience with it?
I have not used the Kreg. I’m sure it can get the job done though. I’m definitely super impressed with the JessEm though. If only it had that sweet sweet button ha ha!
@@FirstFruitsDesignCo I just saw a review on the Kreg and it's between it and the JessEm. They both look good.
@@gaylewilliams7353 I hope whatever you get is just what you’re looking for!
Haha I’m not the only one that loves the button. Every time I’m in the store I have to go push it. It’s too cool lol. I went with the Kreg and I’m happy with it. I don’t remember what I paid for it but it seems like I paid over 300.
It’s addicting. I’m currently seeking help 😉
I purchased the Kreg router table with fence system. I reviewed many router lift systems and decided to go with Rockler Pro Lift Router Lift - 9-1/4'' x 11-3/4'' Large Router Plate. This was a $400 purchase, but looked to be the best built lift. As I tried to bring the combination together the Rockler plate fit the Kreg table just fine. Now for the problems. I had an older Ridgid 2.5 hp router with variable speed. It did not fit the Rockler Pro Lift Router Lift. After many phone calls I was told I needed to purchase an adaptor, I made an additional purchase. I called Rockler tech support when my router still did not fit. I was told to widen the base and fit the router with adaptor in. While on phone to tech support the base plate "cracked" broke when enlarging too much. I packaged the whole system up and sent it back to Amazon. I then purchased the Kreg router lift system, {locally} which did allow my Ridgid router to fit with no problems. The Kreg router lift works smoothly and has no problems.
What a bummer! I’m glad you eventually got it worked out. Thanks so much for sharing, and hopefully it’s a big help to others!
Thanks.
I have a DIY router table without any lift mechanism but I need to upgrade. what are all the rings for. Are they needed?
Not needed per se. I used to have a DIY table that had a gap big enough for my largest bit. It basically just closes the gap up to the bit.
When clicking on the “more” link it minimizes the page instead of providing more information.
Weird.
@@FirstFruitsDesignCo may just be my experience. Hope so.
Just clicked on it and it’s working correctly. Weird is right.
This is specifically for palm-routers, yes or no?
Great question. They fit up to 3.5” routers if I remember right.
Do you remember when cars had a crank handle to roll the window up and down? If youre not using a computer controlled, motorized lift, then you're missing out.
MLCS Woodworking has had a motorized lift for many years. Its hard to believe people still buy crank handle lifts when you can get a lift that accurately moves in .001" increments, has the ability to store position locations, can bring the router up to bit change position with the press of a button, can do plunge operations using the foot pedal, and on and on.
You should review the PowerLift Pro from MLCS woodworking and forget that archaic stuff.
Thanks for sharing
Sure and it costs how much?
@@chris8439just your first born, but by giving that up it gives you more time in the shop with a cool tool.
lol 😂
@@chris8439 the Jessem Master lift is $440 and the MLCS PowerLift Pro is $549. It's well worth the difference in my opinion.
Hello. The view of the JessEm (2 minutes, 31 seconds) there is a silver something at the right of the center ring. What is that? Thanks.
I failed to point that out in the video, but each of these lifts come with a guide bushing. It threads into the router plate and provides a point of contact for the material. You touch the material to the guide bushing and then pivot the material into the bit. Having a leverage point allows you to move the material into the bit at a slow and controlled rate as opposed to just moving the material with your hands. But I must say, you have a very keen eye!!!
I think a better and closer comparison would be the Rockler lift against the Incra Mast-R-Lift II that Incra built with Jessem. Both have aluminum tops and inserts.
This video is comparing a metal setup to a phenolic/metal setup.
Still like the video but it’s almost apples to oranges.
So I would agree it’s not a perfect comparison, as the features don’t compare evenly side by side, but as the base model lift from each company and the ones I happened to spend my money on, it ended up being what we had to compare.
I really appreciate your input though and should the day come where we can compare the Rockler PRO and Incra one we definitely will!
@@FirstFruitsDesignCo that’s fair being their base models.
Rockler has gotten very proud of their stuff recently. It is good, not great.
I bought the best router lift it is a JessEm .
As of this moment, we agree wholeheartedly!
Of these 2 the JessEm is definitely the best, I also looked at the Kreg and it too is far superior to the Rockler.. Is the JessEm better than the Kreg ?? I don't know, but for 40% less US $$ I bought the JessEm and it was (is) the right choice for me, I've had it for a few years now.. It still operates like the day I put it in service.
In one year the price of the Jess EM has doubled on Amazon. Wow
I’ve noticed that is the nature of Amazon. jessem.com/ is probably your best bet for consistency in pricing @JessEmToolCompany
I was thinking the same thing
I want the jessem so bad. Lol. I'm just leary of it fitting in my table.
The difficulty of raising and lowering the Rockler lift would bother me to no end. Such a strange design aspect of the tensioner.
It’s strange for sure. I’m a huge fan of all things Rockler, I just think this needs more time in development.
I would never buy another phenolic insert plate. I got the $250 kreg router table and the plate was terribly bowed to the center. Had them send a replacement "precision" router plate. Still bowed. Couldn't even flatten them out with a CNC machine since they warped after cutting. Save yourself the hassle and get a beefy aluminum or steel version and check it with a straight edge before installing.
Excellent advice! Thanks!
I'm curious if anyone has accidentally press the collar release button while in use... that would be very bad..
I almost want to set up a shield and record that scenario in slow motion
Rockler is expensive compared to other router lifts especially if its restricted to rockler units, I love kreg, jessem has many units choice becomes a problem and shipping to Uganda from Canada is way out of order.
Good point, I didn’t consider shipping for those outside of North America. Thank you for your perspective!
I know what you mean about adjusting but depth on the Rocker lifts. For the kind of money they charge for those you would think they would be better built.🙄
I do agree with that statement, but all in all it is a decent router lift that I am able to make work for me. The bill is a little steep for sure.
It would scare me to death to somehow accidentally press that button, and ring pops up with raised panel bit spinning at 10000 RPM. It wouldn't be pretty. Surprised there is not a safety cover for that button.
That’s how I make my spinach and aluminum smoothies! In all seriousness, you’re right. I didn’t even think about that. It’s not outside the realm of possibility and would be a very ugly event.
Totally agree with that though- as was thinking the same. Router dust building up in cavity and the pushing wood along bit…….. boom- ring comes up and I don’t like to be thinking of that happening. Routers are scary enough.
@@mikeminnick9712 yes they are
great point..
This lift probably isn't the best choice for vertically mounted applications.
I do like that button 😂
I should do a follow up on that because that button is horrifying when you really think about it!
The Jessem router lift is a better lift than Rockler lift.
Fact.
Dam, I am getting ready to buy the Rockler because I have a Rockler top, the opening is the 8.25. I always liked the Jessel better but routing additional inch on top is scary. Problem is that I have the Dewalt 616 and now u tell me it is a issue… DAM IT!!
I had replied to another comment earlier today, and with as much great stuff as Rockler makes, I’m wondering if the issues didn’t stem from the routers. I think I’ll try and get my hands on a few other brands and see if the issue persists
@@FirstFruitsDesignCo Ok so Rockler is telling me that the DW616 should have come with a "plastic shim" in the box that is used to make this router fit. I looked in the box, still have it, no plastic piece. I reached out to DW repair center and the guy could not find.
@@frankrodriguez6424 that’s the first I’m hearing of it. I didn’t have any shim in any of the Dewalt routers I purchased. Sorry that you’re having your own difficulties as well.
Looks like the cutout on your router table was made by a kid with a chisel. 😂😂😂
Very close! It was a kid with a plunge router! Good eye!
When I see a coupon for it, going to take the 616 to store and have them install and show me….. if it sticks, then they will see it
amazon link to the Jessem was $120 more!!!!!!! yikes!!!!!!!!!
Oooff. A lots happened in a short time.