Acceleration and Jerk can be reduced without affecting print time too much. It's very quiet at 500m/s acceleration and 8m/s jerk, can't hear it from the other room.
I was looking why my printer make such a sound but nobody think its not normal from what i see😅 ill just slow it down to like 100mm/s and there no weird sound. And yes i set the acceleration
I know I already commented on this video, but I wanted to also say thank you for doing this video, very little content on this printer right now, so it's cool to get an early shot at what it looks like, and how it prints.
Can someone please help me with the setting for my 3d printer I have the same exact one but when I print something even a easy square cube etc... my 3d printer can't?
have you already tried multi color print by layer and by using filament change on cura, I thinking to buy this printer but curious about how it will perform in that part
Just got this printer yesterday and am still doing the testing on it. So no, I have not done multi color testing on it. And to be honest, I probably wont.
They asked about multicolor by layer specifically, which it should do unless they forgot to add a pause feature. Any printer can do multicolor by layer it's just more work for some.
Creality printers are just like this. Get an upgraded bed leveling kit--it comes with better leveling screws and better springs that keep the bed leveled for longer. I've noticed that, on every Creality printer I have, if you don't do this, you'll end up having to re-level your bed after each print.
I have both an ender 3 se and a kobra 2 pro, got them both about a month ago. I think this is easily the best ender 3 version yet by miles but unfortunately I'll be sending mine back, compared to the kobra 2 pro the se looks incredibly slow and the quality is somehow worse both on the prints and with the machine itself. The biggest issue with the SE imo is the incredibly poor QC, the power cord to my bed is bent in a completely different way then yours and pushed far too the side, and they are so poorly mounted making it a rather nasty fire hazard. The kobra 2 in the other hand has a very firm mount and easily prints at over 3x the speed of the SE with 20k accelerations running 300mm/s. I had to cap the accelerations on the SE to 2500 before it would stop giving me so much ringing.
I just recieved the E3 V3 machine. I do use Creality Print. It takes a little bit getting used to the menu system and options. However it is a good slicer.
Creality Slicer (and especially CrealityPrint) aren't that great. Just use Ultimaker Cura or PrusaSlicer. CrealityPrint is an old, outdated fork of Cura. It's buggy and never ever works right, it can't even slice basic models correctly that have any sort of detail to them--for example it'll just not slice lines correctly. Just use Cura or Prusa.
@@GuysShop So, I didn't know you could just do that lol. So the other day on my ender 3 S1, I cranked up klippers similar feature, and it actually worked well. If you get a chance, see how high you can go. I did 300%, and it worked fine, I then did 400%, but I think i'm hitting acceleration limits in my klipper config, so that really didn't change anything.
not the creator obviously, but for me its actually nice like slice, print thats all its a completely hands-free printer. when you do get it tho, CHECK THE GANTRY as they are literally always off, easy to level that tho and its not really needed as there is compensation but fixing the main problem is always better then to compensate :) auto leveling is also handsfree ofcourse
@@GuysShop cool. I got one ordered, and hopefully should come in a few weeks. It's going to be hard having to use a stinking sd card again while I wait for klipper :D
@@rickybobbyracing9106 IOt does work with Octoprint. Not fully, but well enough to print files that have been sent via wi-fi to the pi hooked up to it.
Bro never The printer is up to something so you shouldn't buy it or you should do it maybe you should buy it but why is it doing the outer process That's the weirdest printer ever I would have just pushed a printer up and let it do the inside process not the outside
Y axis movement sounds like you'll hear it through an entire building
Acceleration and Jerk can be reduced without affecting print time too much. It's very quiet at 500m/s acceleration and 8m/s jerk, can't hear it from the other room.
I was looking why my printer make such a sound but nobody think its not normal from what i see😅 ill just slow it down to like 100mm/s and there no weird sound. And yes i set the acceleration
Thats True from experience. Its still a Nice printer tho
@@SoftBreadSoft how so? If I set them down print time goes way down. i have them set at 2000 acc and 180 speed, jerk 10
same problem here
I know I already commented on this video, but I wanted to also say thank you for doing this video, very little content on this printer right now, so it's cool to get an early shot at what it looks like, and how it prints.
Glad you liked it!
Can someone please help me with the setting for my 3d printer I have the same exact one but when I print something even a easy square cube etc... my 3d printer can't?
Same printer as me :)
have you already tried multi color print by layer and by using filament change on cura, I thinking to buy this printer but curious about how it will perform in that part
This printer comes stock with a single extruder and no quick swap system, meaning you would only be able to print in one color/material at a time
Just got this printer yesterday and am still doing the testing on it. So no, I have not done multi color testing on it. And to be honest, I probably wont.
They asked about multicolor by layer specifically, which it should do unless they forgot to add a pause feature. Any printer can do multicolor by layer it's just more work for some.
@@GuysShop is that printer clicking/skipping?
@@bl4de938 Not at all. The motion system makes some mechanicalmnoise as it moves pretty quick.
How did you get 3d files to show up on it?
You have to format it first
First print was great but it’s given me so many issues with leveling after a few.
Have you contacted Creality Tech Support and let them know what issues you are having?
Hi , im having the same problem did you solve it? Idk how to solve
@@dibec6577 no lol
Creality printers are just like this. Get an upgraded bed leveling kit--it comes with better leveling screws and better springs that keep the bed leveled for longer. I've noticed that, on every Creality printer I have, if you don't do this, you'll end up having to re-level your bed after each print.
I have the same problem, the firsts 3 prints were really good and now I have a lot of problems with supports, leveling and other things
I have both an ender 3 se and a kobra 2 pro, got them both about a month ago.
I think this is easily the best ender 3 version yet by miles but unfortunately I'll be sending mine back, compared to the kobra 2 pro the se looks incredibly slow and the quality is somehow worse both on the prints and with the machine itself.
The biggest issue with the SE imo is the incredibly poor QC, the power cord to my bed is bent in a completely different way then yours and pushed far too the side, and they are so poorly mounted making it a rather nasty fire hazard.
The kobra 2 in the other hand has a very firm mount and easily prints at over 3x the speed of the SE with 20k accelerations running 300mm/s. I had to cap the accelerations on the SE to 2500 before it would stop giving me so much ringing.
I wanted Kobra 2 Pro, but I read it's only online viable which was the reason not to buy it.
How's the printer so far?
Great! I did a full review on my channel
I have the ender 3 v3 core xz wish I could use prusa slicer because I don’t know how creality slicer works. Trying to set it up for tpu
It's almost impossible to get it work My Ender Pro refuses to home,the board failed to read the card
I just recieved the E3 V3 machine. I do use Creality Print. It takes a little bit getting used to the menu system and options. However it is a good slicer.
@@GuysShop I’ve been using orca slicer with good results
Creality Slicer (and especially CrealityPrint) aren't that great. Just use Ultimaker Cura or PrusaSlicer.
CrealityPrint is an old, outdated fork of Cura. It's buggy and never ever works right, it can't even slice basic models correctly that have any sort of detail to them--for example it'll just not slice lines correctly. Just use Cura or Prusa.
@@CalebHesse01 been using orca slicer. Way more friendly for high speed printing
Make a video where you turn up the speed to the max
I have had it up to 200% speed and it did really well.
Thats good to know.@@GuysShop
@@GuysShop So, I didn't know you could just do that lol. So the other day on my ender 3 S1, I cranked up klippers similar feature, and it actually worked well. If you get a chance, see how high you can go.
I did 300%, and it worked fine, I then did 400%, but I think i'm hitting acceleration limits in my klipper config, so that really didn't change anything.
@@rickybobbyracing9106 Yes if the firmaware limits are reached then that's it.
@@GuysShop yup, same.
Coooooooool. How do you like it now that you've had it a while??
not the creator obviously, but for me its actually nice like slice, print thats all its a completely hands-free printer. when you do get it tho, CHECK THE GANTRY as they are literally always off, easy to level that tho and its not really needed as there is compensation but fixing the main problem is always better then to compensate :) auto leveling is also handsfree ofcourse
@@MajroOkino good to hear it, thank you for your input.
Why buy the se instead of the ke, i dont understand?
Price?
@@GuysShop its not that much more expensive compared to the amount of printer you get
@@itsnoah4276 Its "I could wait a month or two or get the se" I had the same question my self but still got the se
Is the bed heated
Yes. If you want to see the full specs, go to creality.com
Hace mas ruido que la ender 3 Neo?
I don't have that printer to compare it too. Sorry!
@@GuysShop ok, tnx
yes it does
Klipper yet?
Not yet. Hopefully soon
@@GuysShop cool. I got one ordered, and hopefully should come in a few weeks. It's going to be hard having to use a stinking sd card again while I wait for klipper :D
@@rickybobbyracing9106you can put the sonic pad
@@rickybobbyracing9106 IOt does work with Octoprint. Not fully, but well enough to print files that have been sent via wi-fi to the pi hooked up to it.
@@omegadeepblue1407 Does it have a profile for this printer now? I looked and didn't see it...
I keep getting shit prints from mine
Have you contacted tech support and told them of your issues?
Так і не зрозумів який краще взяти, SE чи KE
if you tune in you can adjust the speed up to 999%
Rip💀
62nd like and the 22nd comment
Wow. So insightful.
Such a useful comment.
You achieved 22nd place in something that wasn't a competition.
Bro never The printer is up to something so you shouldn't buy it or you should do it maybe you should buy it but why is it doing the outer process That's the weirdest printer ever I would have just pushed a printer up and let it do the inside process not the outside
What are you talking? The walls versus infill?
@@jeremygalloway1348 cuz it's damaging it's printer
@@Mingzhe583Why?
@@Jorge-pr9yp because of that region making me wrong
If you're talking about walls before infill that is determined by the gcode not the printer itself.