My friend thanks for the video. I have a 2011 Honda CRV 4WD SE and it has same issues when I put it on d and then reverse or neutron the D is blinking and the shift doesn’t change when I go over 60. What’s the main cause? It drive good on reverse and it can go over 60 but the gear don’t shift.
My 2007 honda crv will lose power to the dashboard gear indicators, then when i park, i cant shift out of park and i cant get my key out the ignition unless i disconnect the negative on my battery. Any idea whats the issue?
So my 07 Crv has this flashing D. And engine light on... But zero. I mean ZERO tranni problems. No jerking changing gears, no hesitating or skipping. Without the light is running like a dream. Is this most likely a sensor?
Hello sir.. the gen 3 crv that im using has jerking issues from full stop bfore and shift to drive..it will jerk before it runs...and now even when driving 40kph..it will jerk .. what can be the issue in the transmission? Tnx
Could be your VVT Solenoid needs replacing & change your oil the same time if not could be transmission issues. I had the same problem where my CRV would jerk when I’m driving at 40mph & it would jerk or it did not want to accelerate well.
I noticed that issue when I purchased my honda crv exl 2014 last 2021 days after,shudder or shaking between 33miles to 39mile,I flush my old transmission fluid,then I put Valvoline highmileage trans fluid,I disconnect First the battery to relearn the ecu then after all the proces,I observed many days,still there is small shudder,I do it again the same way,that time my CRV has only 72k miles,now already 107k,Thanks to God until now no shudder or shaking….pinoy nj
@@alexs9590you’re right, I change the VVT solenoid no more jerking motion between 20-30 and 30-40 speeds, and running ok. No my crv has knock sensor and transmission pressure switch A problem = 2nd pressure switch!..
Good video. Can the transmission codes be reset with the scanner you have.
Thanks this is very helpful, do you by chance have a video to help locate the 3rd/4th pressure switch?
Ty so much, this video was really informative and helpful
Glad it was helpful!
My friend thanks for the video. I have a 2011 Honda CRV 4WD SE and it has same issues when I put it on d and then reverse or neutron the D is blinking and the shift doesn’t change when I go over 60. What’s the main cause? It drive good on reverse and it can go over 60 but the gear don’t shift.
u need to hook up a good scanner it might be a transmission issue
I have the same problem what did you find the problem?
Same complaint here hinds 2009
My CRV engine light on, Auto Zone scans code PO843 A is the 2nd transmission pressure switch problem ? like you show on the video. Thank you!
Easy fix, Honda mounts their pressure switches and solenoids external. If you can change your own oil you can replace both pressure switches.
How much is that tablet and where do you bought it please
launch creader 129e from amazon.ca around $300
Thank You for the video and information!!!
No problem!
My 2007 honda crv will lose power to the dashboard gear indicators, then when i park, i cant shift out of park and i cant get my key out the ignition unless i disconnect the negative on my battery. Any idea whats the issue?
no idea we need to scan it for codes we dont guess
So my 07 Crv has this flashing D. And engine light on...
But zero. I mean ZERO tranni problems.
No jerking changing gears, no hesitating or skipping. Without the light is running like a dream. Is this most likely a sensor?
scan for codes if u had this code on the video change the sensor
Usually the 3rd 4th gear shift solenoid
Hello sir.. the gen 3 crv that im using has jerking issues from full stop bfore and shift to drive..it will jerk before it runs...and now even when driving 40kph..it will jerk .. what can be the issue in the transmission? Tnx
i dont know it did to be diagnosed my friend
Could be your VVT Solenoid needs replacing & change your oil the same time if not could be transmission issues. I had the same problem where my CRV would jerk when I’m driving at 40mph & it would jerk or it did not want to accelerate well.
I noticed that issue when I purchased my honda crv exl 2014 last 2021 days after,shudder or shaking between 33miles to 39mile,I flush my old transmission fluid,then I put Valvoline highmileage trans fluid,I disconnect First the battery to relearn the ecu then after all the proces,I observed many days,still there is small shudder,I do it again the same way,that time my CRV has only 72k miles,now already 107k,Thanks to God until now no shudder or shaking….pinoy nj
@@alexs9590you’re right, I change the VVT solenoid no more jerking motion between 20-30 and 30-40 speeds, and running ok. No my crv has knock sensor and transmission pressure switch A problem = 2nd pressure switch!..
Pinoy ka bro?
Pinoy na pinoy
@@asianmechanicguy6483
Hi Sir
Meron ba kayong shop or nag service kayo?
Blinking D din, ang code is P1731,P0780
Sana mapansin
@@jonathanperalta4357 saan location mo dito sa Vancouver
i hope you know what your doing
good job honda wants to charge me 500.00 to fix my blinking d light problem
wow that a good point
Such shitty transmissions Honda makes.
so true