In the manual, it shows that the parameters 'Base Plate Thickness = 0.400 mm, type = Shadow' apply to teeth and gums. In your video, you use 'Shadow' for the base and 'Bounding Box' for teeth. Now, which one is correct?
Is there any software that can use a panoramic x-ray to extrapolate a digital model of missing teeth? I mean of course an old x-ray that included the now missing teeth.
Can you make a video of how you guys use supports for your printing. I watch dentists just auto apply support and they dont even look at the build to see if it missed any islands. Please help me.
Hi Mark. Thank you for the feedback. We will work to make that possible, but in the meantime, feel free to contact our technical support at productsupport@whipmix.com and our team will happily walk you through this.
Thank you for your input Houtan Arefi! We used the wire cutter due to the low cost of investment needed and cross compatibility for other 3D printed indications. The diamond disc is a great idea! We will have to try it out next time!
I’ve manipulated the parameters of the support structure so that the support don’t intersects through the Modell. It’s easyer to remove by hand post curing. No tool needed 👌🏼
This is going to depend on the material that you are printing with. Each material should have an instructional guide to advise on the best printing parameters for achieving the best results. All materials sold by Whip Mix have those instructional guides on our website under our resin sections for each respective resin.
This video was made by the Massad Center for Higher Learning. Although we don't know which exact product that is, here is a similar product we have used: www.amazon.com/dp/B083SJ7Y99/ref=nav_timeline_asin?_encoding=UTF8&psc=1
To receive digital dentures, you will need to get treatment from a dentist. If you need assistance finding a dentist who has a digital practice, feel free to email us at whipmix@whipmix.com with your location and we will see what we can find for you.
Essa é uma pergunta difícil de responder sem saber sua situação. Se você estiver nos EUA, ligue para 1-800-626-5651 e um representante de vendas ficará feliz em discutir suas opções. Se você não estiver nos EUA, encontre um revendedor local aqui para discutir o que é melhor para o seu negócio: whipmix.com/dealers/
![ฮักเทื่อสุดท้าย - บอย ศิริชัย [OFFICIAL MV]](http://i.ytimg.com/vi/-1PoPoQ-B-k/mqdefault.jpg)
I have been unemployed for a while and I understand a lot in the field of dental restoration, if I get this machine I will work and have an income
In the manual, it shows that the parameters 'Base Plate Thickness = 0.400 mm, type = Shadow' apply to teeth and gums. In your video, you use 'Shadow' for the base and 'Bounding Box' for teeth. Now, which one is correct?
Why cure in glycerine?
Какой глицерин нужно использовать
Is there any software that can use a panoramic x-ray to extrapolate a digital model of missing teeth? I mean of course an old x-ray that included the now missing teeth.
Can you make a video of how you guys use supports for your printing. I watch dentists just auto apply support and they dont even look at the build to see if it missed any islands. Please help me.
Hi Mark. Thank you for the feedback. We will work to make that possible, but in the meantime, feel free to contact our technical support at productsupport@whipmix.com and our team will happily walk you through this.
Yes
Why using non medical wire cutter? using small diamond separating discs is easier and safer.
Thank you for your input Houtan Arefi! We used the wire cutter due to the low cost of investment needed and cross compatibility for other 3D printed indications. The diamond disc is a great idea! We will have to try it out next time!
I’ve manipulated the parameters of the support structure so that the support don’t intersects through the Modell. It’s easyer to remove by hand post curing. No tool needed 👌🏼
hi. what is the best direction to place the base at the plataform.
This is going to depend on the material that you are printing with. Each material should have an instructional guide to advise on the best printing parameters for achieving the best results. All materials sold by Whip Mix have those instructional guides on our website under our resin sections for each respective resin.
At 8:50 what is the enclosure inside of which you are doing the cutting and polishing?
This video was made by the Massad Center for Higher Learning. Although we don't know which exact product that is, here is a similar product we have used: www.amazon.com/dp/B083SJ7Y99/ref=nav_timeline_asin?_encoding=UTF8&psc=1
What is that product you use to polish denture?
We like to use Anaxdent characterization and polishing products but there are many options out there that will do a great job.
Where can you get digital dentures and partials?
To receive digital dentures, you will need to get treatment from a dentist. If you need assistance finding a dentist who has a digital practice, feel free to email us at whipmix@whipmix.com with your location and we will see what we can find for you.
In Toronto
Qual o valor do investimento?
Essa é uma pergunta difícil de responder sem saber sua situação. Se você estiver nos EUA, ligue para 1-800-626-5651 e um representante de vendas ficará feliz em discutir suas opções. Se você não estiver nos EUA, encontre um revendedor local aqui para discutir o que é melhor para o seu negócio: whipmix.com/dealers/