iPod Touch 4 - Back Housing / Motherboard Replacement / Full Take Apart - Part 2
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- iPod Touch 4th Generation Back Housing Replacement -Part 2
Back Housing / Motherboard Replacement / Full Take Apart
Required Replacement Part:
www.amazon.com/...
Use the following link to share this video:
• iPod Touch 4 - Back Ho...
Videos provided on this channel are intended for informational purposes only and cannot be held liable for any injury, damage, or problems that arise when trying to duplicate steps shown in these videos.
This information is provided “as is” without any representations or warranties and should not be treated as advise.
This information is not guaranteed to be accurate.
Do it on your own risk.
I would say make sure you get under the copper plate underneath iPod battery using hard flat tool or dining knife. Don't separate the copper plate and the battery. This way the battery doesn't bent too much and doesn't get damaged permanently.
Note small metallic part I remove at 1.18. Make sure you didn't forget it. New back housing comes without it and you need to reuse the old one. Without this piece power button will not work properly.
Usually all stuff should stay untouched, but I've seen it being reset to factory state a few times. I would recommend to back everything up before the repair.
Hi thanks for the video. I had a fourth gen with 32 gbs and it literally fell off a building, I saved the mobo/ (rectangular shaped with chipset under shielding) and was recently given an 8 gb model. Can I swap in the larger board?
Not sure...
Either look for it on Googel search, or buy cheap trashed iPod with working motherboard and replace it. That's the only thing I can come up with.
This is probably the hardest electronics repair I've done so far. You gotta have have at least some prior experience before attempting this.
I had the same issue. It would not sit in place. I ended up using metallic filer to file off corners a little bit.
No, I don't since there is many other TH-cam channels showing how to do that. I just didn't want to post another one.
I don't really wanna mess with it. It is complicated and risky repair. So easy to screw up the ipod. $40 min.
New back plate comes with camera glass attached to it. You'll have scratch-free camera after you replace it.
I had no problems with mine. Did you remove old adhesive completely before putting new one?
Seems like the back housing was not made to factory specs. Return it if you can.
It'll take about 1 hour, or faster if you have prior repairs experience.
I realized that but however for some weird reason its stiff. also the new back housing came with not slots for the side button so im thinking its the back housing
I was wondering if while doing this, could I replace my battery by melting the glue that holds it to the copper thing and after removing the old battery, changing it for my new one while putting it back together, btw sorry fir my bad english...
great way to screw your ipod touch. So many oportunities to scratch/damage those ribbon cables. I bought a new cover but didn't realise it was so fidly and dangerous. Decided just to keep my badly scratched case on it after seeing this.
Thank you very much! I've looked everywhere on the internet on a way on how to replace the back housing and this is the only one i could find. now my iPod looks and feels exactly like the day i bought it! thanks again!
So when putting the new screen on you had no problems? I have it that it doesn't want to go down far enough. Just wondering if anybody had the same problem?
If it there - it definitely matter...
I did exactly like you did step by step but when I went to close the LCD to the housing it doesn't seem to fit one corner can you help me please
i broke the speaker off and my ipod isnt working will the ipod work without the speaker and do the little springy things matter
how long does the whole process usually take? from taking the ipod touch apart to putting it back together , how long? please tell me thanks
Yes. It's just like original.
My old housing has 3 dents in it and the camera is all blury when i replace it its still gona scratch up
I got a new iPod touch and succesfully toke it apart and i removed the logic board and volume flex without destroying anything and everything is still working but how do i replace the microphone? It is a surface mounted microphone and i want to fix it
if i brought a screen and back housing and sent it to you with my ipod how much would you charge
Did all your stuff come back or did you have to reset or restart it? Or did it restart somehow?
Hi were can you get Ipod Touch Motherboard replacement?
+Seth Aque
What generation do you need?
+Seth Aque
eBay is the only place I can think of.
They don't always have it, but you may be able to find cheap cracked iPod with working motherboard and swap it as alternative (or probably the only way to find good working one):
rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=9&pub=5575132837&toolid=10001&campid=5337787650&customid=&icep_uq=iPod+Touch+4+motherboard&icep_sellerId=&icep_ex_kw=&icep_sortBy=12&icep_catId=&icep_minPrice=&icep_maxPrice=&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg
Temachok 4g Because the screen turned white and blurred.
Do you have any idea about how can i get a new motherboard for my 64gb ipod touch 4th gen?
Yes, you can do it. Just be very careful.
Your English is good!
$90 for parts & labor.
Thanks for watching!
Hello I need a new back housing can you send me a link to a cheap one?
Just copy and paste the whole link...
Temachok thank you
No problem!
No the speaker wont affect your whole ipod! The spring dosnt matter!
Thanks for sharing. I could't find one myself, so I decided to make it.
I'm glad my video was helpful!
Enjoy your new iPod!
thank's....good replacement...i follow your video and i can change flex cable with sleep and volume control....amazing
Thank you, thank you!!!
do you have a video showing how to replace the screen?
my power button isn't pressing down
I think I might have figured it out
That metal piece that is connected to the power and volume ribbon that you screw into the iPod back can do they come when you order a new ribbon. 3:04 on your video
and the gold little piece of tape you put over the volume ribbon after can you buy those? 5:36 on your video
Please let me know thanks
I've never seen those sold separately.
You may buy broken / non working iPod for few bucks on eBay and part it out.
How much would you charge to do this?
I finely got it fixed and it works thank you so munch, I am doing two iPods housing repair
Good job! Thank you for sharing!
Very good job man..Very helpful Thank you
Thanks!
What are the color of the screws that screw in the power button, email me or reply to this comment, both would be best, please
Sorry, I have no idea. It was 2 years ago when I did mine.
Does the new housing scratch?
Thanks so much, very helpful.
Where can i buy a back of my ipod touch?
I got it from eBay. They are like $5-8 right now.
Thank you man!~
Thanks for your feedback.
what wold happen if you didn't put the coper tape on the flex
It's EMF shield and heat sink at the same time. It blocks Electro magnetic field interference caused by wi-fi antenna or other components and helps to prevent overheating by spreading heat.
It's better to put it back where it was before you fried something...
thank u very much
Is it possible to replace a 16g 4th gen model backing with a 32g backing?
Sure
Thanks, i'm currently trying to repair my 16g Ipod 4th gen but only see the 8g, 32g, and 64g replacement backing parts online. So i will go ahead and order it. thanks again and great video.
Can you still do this repair ?
I dont really do iPod repairs at all.
Do you know what stores that sells motherboards for iPod touch
The only place I know is eBay.
You can either try to find good working motherboard, or cracked iPod with good motherboard for parts.
Ok
What to do if the green chip is snaped in half in the middle next the battery i want my photo's back but it is not turning on i have a brand new iPod Touch 4G thats never been opened but my old one have the pcb broke and i want photo's and the power cable broke to wich need to be soldered pls help
Did you ever connect iPod to a computer?
If yes, iTunes automatically makes a back up of all your content.
Yes but after that i put music on it i never put it back in the computer (sorry for my bad english)
Unfortunately, there is no way to recover it. iPod has to be working to be able to recover the images.
This is an empowering video. I've bought the parts and I'll be repairing mine today. Thanks for creating this.
how did it work out for you ?