How to Replace Headlights 2007-14 Chevy Silverado
ฝัง
- เผยแพร่เมื่อ 13 ต.ค. 2024
- Buy Now!
New Headlight Set from 1AAuto.com 1aau.to/ic/1ALH...
Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle. This video shows you how to install new, quality, TRQ headlight assemblies on your 2007-14 Chevy Silverado.
• Check here for more videos on the 2007-2014 Chevy Silverado: • Chevy Silverado 2nd Ge...
This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXA...
• 10mm Socket 1aau.to/oa/1AXA...
• Needle nose pliers 1aau.to/oa/1AXA...
• Needle nose pliers 1aau.to/oa/1AXA...
• Ratchet 1aau.to/oa/1AXA...
• Socket Extensions 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Chevy Silverado 2nd Generation 2007-2014: • Chevy Silverado 2nd Ge...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Best tutorials on TH-cam no one else compares from intermediate to hard this Chanel is great
Thank you for the tutorial. It was very helpful. I my headlights were so old they started to crack.
Here are some tips that helped me:
1. Use a 1/4" extension instead of a 3/8"s to reach the screw under the headlight.
2. When removing the plastic retainers for the cover, if they're stuck and you're afraid of breaking them because they're brittle and old, spray WD 40.
3. Also spray the grille connectors. When you release the connectors, the tab won't come out all the way out until you're on the other side of the grille.
4. When removing the headlight, look behind the fender where the headlight meets. There's a black plastic piece that's getting in your way. Push this down with a screw driver if you don't have a plastic trim tool to push down with from the front.
5. If you do push down from the front, be careful not to nick the paint.
Good luck!
Great job showing the steps to changeout a headlight lense. And also replace a grill if necessary!
GM really screwed the pooch on this design. It should be WAY easier to replace a simple bulb.
Straight up. I love my Chevys but wtf. I was good with 1 screw on each side like the 80's and 90's vehicles
My 2014 truck had a bolt at the back/side of light. Tab is not there now. 😢. Broke it off. “Just pull at angle”. NOT. I just needed bulbs so now I get to do the whole damn thing
The new TRQ replacement headlights came with bulds already installed. Do I need to replace those with new bulds?
+1Bigdog Copper Test bulbs may be included with the assembly, we do recommend changing them.
My grill is hooked into the bumper. It does not lift up
All this for a headlight???? Cmon
A