Old Mechanic Taught Me This Trick - How To Remove & Install Valves In A Cylinder Head
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- An old mechanic showed me this trick, passing it on to the next generation. A version of this trick was shown to me many many years ago when I was an apprentice mechanic - how to remove cylinder head valves with basic tools.
I have varied it slightly using a die holder as I felt this worked even better, I love these old school DIY mechanic tips.
If I helped ya out and you would like to buy me a drink ko-fi.com/gera...
Thanks to everyone who watches my videos, Likes, Shares and or leaves a comment. I appreciate everyone of you.
Tool options that I recommend and use. www.amazon.co....
➢ For business inquiries Email : gerardburkebusinessinquiries@gmail.com
Disclaimer:
GerardBurke is a qualified Motor Technician who has completed modules & courses in manual handling and all aspects of workshop safety. These videos are not intended to be used by anyone who is not trained and or qualified to carry them out.
Due to factors beyond the control of GerardBurke, I cannot guarantee against improper use or unauthorized modifications of this information. GerardBurke assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. GerardBurke recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of GerardBurke, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not GerardBurke.
I learned this hack from and old mechanic years ago
If you need to remove a valve from a cylinder head either to replace the valve or replace the valve seals, this video will help you do that.
Remove and Reinstall Valve Spring Easy! NO SPECIAL TOOLS REQUIRED!!
How To reinstall valve spring and keepers Easy & Simple
How to remove valve spring collets
An old mechanic I worked with years ago showed me a version of this tip, little did I know nearly 20 years later I would still be using it.
Thanks for watching, if you enjoyed the video please hit that 👍👍👍
brilliant trick with the plastic.
I'm an old mechanic as well and have done countless headjobs and I wish I had have known this 50 years ago.
As a matter of fact, I've just finished four pairs of heads just yesterday.
Murphy's Law
🏆🏆🏆👍🇺🇲🙏
Thank you for sharing
Thanks Mark 🙏🙏
Great idea! I was wondering how you would get the collets back in, but such a simple method pays off. Not everything needs a special tool! 😉
Always nice when you can showcase these tips in a real world situation, special tools not suitable on this head so ending up going back to basics and it worked a treat 💪👌
@@GerardBurkeBurkesGarage Some forget about the basics & make the job harder than it has to be.
Thinking outside of the box brings satisfying solutions
Absolutely love this tip! Thank you for sharing!
🤗🙏❤️
Unreal...! thanks for the close-up!
Thanks Terry, I wanted everyone to see exactly how it works with good footage :)
What is the thing under the plastic sheet when pressing back the keepers?
Thank you so much for this top tip. Like you said, special tools would not work on my bike so I thought I'd give this a go and within half hour had all 16 valves out and on the bench. Simple yet genius idea.
thats a little gentler than a socket and a hammer, not a bad idea
👌👍
Doooope!! I love things like this, Thank You so much Bro!!! 👊
Me too 🤜🤛💯
A better idea is to replace the socket with a piece of PVC pipe. This makes it easier to get your keepers since it is nonmagnetic. Also, there is no possibility of gouging your lifter bores (or something else) should you make a mistake and the socket slips.
Cracking tutorial - cheers!
Good vid gearld
Thanks Liam 🙏🙏👍
You can't beat knowledge and hands on experience
What was the cause of failure? Broke timing chain? That valve was TKO'd
Timing went out, Timing belt in this one not chain.
@@GerardBurkeBurkesGarage what's your opinion. Chain or Belt for the timing? Which is best over all?
@@andrewharris7868 Chain for longevity, belt for reduced noise.
Overall chain seems to have more pros related to cost savings, but if I was to buy a high mileage vehicle I would prefer if it had a belt so I could change it easily 😉
@@GerardBurkeBurkesGarage wonder if these incredibly thin modern oils has anything to do with the increased failure rates among modern chain timed engines.
Thsts an awesome removal tool and used that way before but absolute shite for installation..
Thats for weak OHC springs.
Thank you so much ........ This is the perfect video
🙏🙏💪💪👌👌
I thought Gerard how to do this😄
Unreal....! thanks for the close up!
Their called collets not keepers still a great tip👌👌
Thanks Dean, I appreciate the kind words.
Lots of parts in vehicles have different names, usually different regions have vast amounts.
I grew up calling them keepers and it was printed on the removal tools, a quick search will show you parts/tools suppliers call them keepers.
Another name is also valves locks (I never used that before)
Example different countries have steering rack inner tie rods others have Rack Ends
Some have track rod ends other have Tie Rod Ends (very confusing but that's 1 of a thousand)
Headlight globe aka Headlight low/dipped bulb
Main beam globe aka Headlight high/main/full bulb
Nice one! 👍🏻😎
Thanks 👌🙏😀
Fantastic tip that Gerard, simple and very effective, Thankyou:):)
Cheers Pat 🍻
I hope ye are all well over there 💪
Storms here at the minute so big changes 😕
@@GerardBurkeBurkesGarage All good over here thanks Gerard, promised a heatwave again for the weekend, will see if it comes to the West 🙈, hope you are all good in Oz, mind Yourselves 👍🙏😎🇭🇲🇮🇪
Genius.... For a DIYer stuff like this is invaluable. Saves buying a tool you'll probably never use again.
Brilliant as per gerard
Thank you 🙏👌
way more effective than trying your luck at a cheap compression tool....Thank you!
or an expensive one I might add
Excellent GB! Great tip!! 👍😁😁
Thanks Chris 🙏💪💪
Well l learned from you today excellent
Thanks Colin
Genius
Thanks Angus 👌👏
"Old mechanics taught me" ,then he went on using new tools, show me something old like compresing coil spring using a piece of cloth and guava tree branch