Hey Kevin, Those Harbor freight “Pittsburgh “ wretches are guaranteed for Life. Just be sure you get the ones that have the words PRO in the name...those are Guarenteed!! Good job on these Vids!!
When you run a TAP to ‘chase’ threaded holes, be sure to use a “ROLL TAP” not a standard cutting tap. The reason being is the “ROLL” tap will not cut into the already made treads but actually restore the threads by pushing the material back into place. The down side to using a ‘cut tap’ is it WILL remove material from the threads. This will cause a potential stud or bolt FAILURE!! If this happens, you’ll have to get a hili-coil put in and these can get very expensive if you do not have the skills and correct tools to do it yourself. If this has happened to anyone then you’ll be able to relate here. Any questions, email me or Kevin for help.
Are you really located in South Texas? Would love for you to build me a 4mill with welded hot rod crank etc. It is obvious you know all the ins and outs. I've been buying parts and setting them aside for the last year. Have a little more to go before I have the build done.
Where did you say hi send your cylinders?i sent mine to a company in alpena mi company called fullbore online,there auwfull,they recived cylinders feb 15 2019 and I still haven’t got not one phone call not one email not nothing from them,so looking to see about using another company,thanks for these videos yiur awsome bro
Hey men, love your vids, but I have a problem with my banshee, the problem is that when I start it, if I don't keep on reving it, it turns off, I don't know if it's the spark plugs or something else, and I was wondering if you could make a video of it, thanks
You should make a video on reeds cuz I had no idea they were there and so important. I thought I was messing up on tuning carbs are they raddled lose but come to find out my reed broke
That packing job made me geek 😂🤣👍🏻👍🏻
Another great video man, keep it up. These videos are very interesting and informative.
Great job packing the cylinders I work at ups
Hey Kevin,
Those Harbor freight “Pittsburgh “ wretches are guaranteed for Life. Just be sure you get the ones that have the words PRO in the name...those are Guarenteed!! Good job on these Vids!!
Another nice vid👍
great vid. thanks for sharing Herr Jugs
Nice video!
When you run a TAP to ‘chase’ threaded holes, be sure to use a “ROLL TAP” not a standard cutting tap. The reason being is the “ROLL” tap will not cut into the already made treads but actually restore the threads by pushing the material back into place. The down side to using a ‘cut tap’ is it WILL remove material from the threads. This will cause a potential stud or bolt FAILURE!! If this happens, you’ll have to get a hili-coil put in and these can get very expensive if you do not have the skills and correct tools to do it yourself. If this has happened to anyone then you’ll be able to relate here. Any questions, email me or Kevin for help.
Thanks for all these great videos. Your carb sync video helped me a lot. If I don't have air tools to clean those surfaces, will steel wool work OK?
How in the world do you not have more views.
If I run a 50 watt headlight build should hi run a high output stator?
If someone is replacing there studs with new titanium ones is there a particular brand you recommend?
I have the same vice
Are you really located in South Texas? Would love for you to build me a 4mill with welded hot rod crank etc. It is obvious you know all the ins and outs. I've been buying parts and setting them aside for the last year. Have a little more to go before I have the build done.
Wut parts would you need for this engine build
Hey what do you think about those eBay cylinders? Never tried them before
Do u have to haves 4mill spacers for every 4mill build because my piston are hitting my dome
Where did you say hi send your cylinders?i sent mine to a company in alpena mi company called fullbore online,there auwfull,they recived cylinders feb 15 2019 and I still haven’t got not one phone call not one email not nothing from them,so looking to see about using another company,thanks for these videos yiur awsome bro
Please. I have Banshee motorcycles is gate water from the pipes, I want to know what the problem
Hey men, love your vids, but I have a problem with my banshee, the problem is that when I start it, if I don't keep on reving it, it turns off, I don't know if it's the spark plugs or something else, and I was wondering if you could make a video of it, thanks
Daniel Valencia
sounds like might just need the idle adjusted. Can you text a video to me? 361-243-0431
You should make a video on reeds cuz I had no idea they were there and so important. I thought I was messing up on tuning carbs are they raddled lose but come to find out my reed broke
Don't you want the cases ported also?