Making a DIY Lure & Catching Pier FISH OF A LIFETIME on it!
ฝัง
- เผยแพร่เมื่อ 2 ก.ค. 2024
- In today's video I turn a wooden dowel rod into a homemade DIY Fishing lure (popper). After I build the lure, I take it fishing and catch a pier fish of a lifetime on it! This super easy and simple DIY fishing lure project was tons of fun to make, and even more fun to fish. I look forward to learning more about how to make your own fishing lures, and then using them to catch monster fish! Thanks for watching!
▬▬▬▬▬▬▬Contents of the Video ▬▬▬▬▬▬▬
00:00 Intro
00:56 Measuring and Shaping
05:59 Rigging Weight and Wire
09:42 Coating and Painting
14:15 Finishes and Lure Epoxy
19:18 Catching a Fish of a Lifetime
25:13 Rod and Reel Specifications
▬▬▬▬▬▬▬Subscribe ▬▬▬▬▬▬▬
►Subscribe To My Channel: @RyanMorie
▬▬▬▬▬▬▬ Follow me on Social Media▬▬▬▬▬▬▬
►Instagram: @ryan_morie
bit.ly/3qHEiTkRyan_MorieIG
▬▬▬▬▬▬▬ Business Inquiries▬▬▬▬▬▬▬
►Email: ryan.morie@gmail.com
▬▬▬▬▬▬Reel Recommendations▬▬▬▬▬▬▬
►My Favorite Big Spinning Reel
amzn.to/2QsM2Zb
►My Favorite Mid-Sized Spinning Reel
amzn.to/2SVKSqu
►My Favorite Little Spinning Reel
amzn.to/3j96r14
▬▬▬▬▬▬My Favorite Lures ▬▬▬▬▬▬▬
►My Go-to Lure for Saltwater
amzn.to/35q0CVa
►Great Flats Lure:
amzn.to/3jeHq4G
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support! - บันเทิง
A very prideful moment as a fisherman pulling up a pb on your own lure, keep up these great videos 👌🏻
Thank you! Will do! 🤙🏼
Ryan let me tell you! That hard work on that cheapy wood lure that cost you nothing...and just shows the hard work God gave you back to land a trophy fish! You my man have my all time respect brotha! Keep this type of content up! You embarrassed everyone on that inlet. It was VERY special!
Thank you for the kind words Sir! Glad you liked the video 🍻
That was FREAKING AWESOME.
Glad you liked it!
I am absolutely going to do this with epoxy
That just goes to show that fancy paint jobs only catch fishermen. Great job nothing better than catching one on a homemade lure!
That redfish was admiring your fine craftsmanship
That was totally awesome!!
Awesome stuff mate, as you said it doesn't matter what the lure looks like it all comes down to performance, and if it performs how it should or how you want it to then that should get fish, the flashy stuff is just added extra for looks and to be honest most fish or nearly all fish don't care what a lure looks like, it's how it behaves in the water, great video, cracking fish, nice job 👍 👌
cantik lurenya aku suka senior
Use a hole saw drill bit to cut your wood dowel in half should give you the shape your looking for maybe, let me know if that works just thought of it
Bro!!! I enjoyed this video from the making of the lure to the catching of the fish! Bro, I was on the end of my seat watching the netting!
It’s pretty cool what a little “suspense” music can do for a video. Thanks for watching! 🍻
Excellent content creation right here.
Thanks my man!
thats epic
Seen the thumbnail and thought you had a half eating hotdog with a hook and through wire. Awesome stuff going on this channel Ryan.
🤣🤣🤣 lmao. If it works it works
@@RyanMorie just being able to make something that catches is priceless man!!🤙
What a video!!!!! So cool!
I’m glad you liked it!
Dude that's epic! Huge fish and an even more amazing catch on your own lure. Well done!
Thanks man!
Amazing
That was so Damm cool ❤🙃😃🙃😃🙃😀😀😀
Wow
What a video. I luv the lure. My only “complaint” is I would spend more money on the spray paint and epoxy etc than just buying the lure lol. Great vid. Nice job with that fish
Sick brotha! 🙌
Thanks man! Us smaller channels gotta try and think outside the box haha
Every good fisherman knows DeWalt is the superior power tool company
Nah Ryobi
This is awsome, great video!
Thank you Sir!
Hey man try using tabletop epoxy from totalboat and just pour a flood coat over the lure so you don’t have to paint it on. Might be worth a try, it works great for cutting boards etc
I really enjoyed watching this, it’s relaxing and watching someone craft a lure is satisfying 😂 loved it Ryan
Fish on big bro...watching grom philipines
That’s awesome bro
Reminds me of a Hadden popper from the 1950s my grandad used,if only I had it today,worth a lot of money!!!
That’s too cool! I’ll have to look them up
@@RyanMorie old times baits,worth a lot of money,I wish I had grandaddy s tackle box!
Call it the glizzy popper🤣
💀😂😂😂
Nice... I love what I witnessed, DIY lure and the giant fish... Epic!
What an awesome way to test out a home made lure, awesome video as usual man
Great change of pace. Never stop asking "what if.....".
A Dremel tool would probably lessen the time required for the popper face shaping. With the multitude of attachments, you could carve a Mona Lisa into a dowel, add some hooks, and it'll probably catch some fish.
Keep up the good work.
Thanks for the kind words and the suggestion!
That is a really cool idea. Whenever I catch a truly special fish, I retire the lure that caught it. Just to remember that special experience. You should hang that one up. Make a new one, and use that one.
Also, how can anyone give this video a thumbs down???
Lol "A Poor Craftsman Always Blame's Their Tool's". I have drawers full of the exact same tool's lol. As long as the fish like the lure where's the problem? The hair's make it look even more realistic as a field mouse that's covered in the thing's. Your catch wasn't exactly a minnow so maybe the cheap brushes worked after all. Yep you did good.... Real good congratulations on your PB.👍😷👍 IT WAS A STONKER 👍😷👍 Take care my friend.
This is nuts man! Congrats!
Thanks dude! Glad you liked the video 🍻
Here's a free trick to make a very strong wire through, where you can't see the twist. First an "eye bend" on the wire, where the loose end is a bit longer than the plug. Stick through and make the other end the same, so you end up with an eye in each end, and loose ends sticking out beside them. Then you twist the two eyes, so the wire locks around it self, and shortens up, so your eyes only stick halfway out, which also makes it stronger.
To make the wire stiffer first flat in the end so it will fit a drill Chuck then spend and drill slowly this will take all the twist out of it and will make it stronger I recommend this tip on making your own umbrella rigs
Great tip! Thank you 🍻
You can use stainless tig welding filler wire for the hardware
Man awesome lure....just a tip use some super glue and baking soda for the stuff you dont want to move. Learned that from marlin baits.
You get what you put in 🙏🏽 congrats
How rewarding is that? Not that you needed it but was thinking a feather tail might be a nice addition to the lure. Then again the big red might not have ate the lure with a feather. Who knows. Nice one!!
Awesome video! I Definitely want to try making my own lure now.
Do it! 🤙🏼
After starting out fishing Juno and Jupiter (Blowing Rocks was our favorite Snook spot), my Dad was transferred to Vero when I was 11 and I started fishing Sebastian until I was commissioned into the Air Force. Glad to see you catching that Red there!
Thank you Sir! Hope all is well 🍻
Great job, I'm going to do the same popper. If I get it, I'll take the catch!
Good luck!
What an awesome video, I loved it I definitely want to make one! That redfish was awesome!
Thanks Tim! Good luck and tight lines 🍻
Well done man 🤙😎🤙
Thanks Jayson
An idea.
What if you took the paddle bit and drilled a hole 3 inches in. Then cut across the hole. This will give you 2 popper mouths one on each side of the hole.
This would save you a lot of arm work with the sandpaper on the pipe.
Just my 2 cents.
That would probably work great!
I made a popper and I manly used a belt sander to round it out ant then I grabbed a drill bit that was a sedimentary file and I made a bowl for the flopper mouth and I caught 2 bass on the 1 so I'm making more
Fvckin love this guy
🤙🏼🍻
👏👏👏
Awesome video man, how about trying to build your own glidebait next?
That’d be next level! We’ll see 🤔
Ryans certified
Certified googan! 🤣
Ryan needs a lathe next
Even thou you did not say much in the video, this could be one of your best video thus far , great job /excellent content 🔥🔥🔥🔥👍
Ya wanna catch some big reds come to NC that was about a 38 inch fish id guess we slay em at cedar island good catch man id deff keep that lure
Mannnnn it’s weird that like I fish that inlet and live near and so do you 😂😂
Good stuff 👊🏼 I'm sure that was pretty satisfying. Was that on the outgoing tide?
Why did you go to the deeper part of the pier instead of remaining shallow seems to me like it is harder to handle and more weight to pull upwards.....I can't think of what would make it easier, faster, or more manageable to land fish at end of pier?????
Can you tell me what fishing pier you were fishing at towards the end of the video? That pier looks nice, I would like to go there one day!
Congratulations and great job when are those Lewers going to be up for sale maybe you got something going here $$$
If you're thinking about making your own lures they do work just may not last long depending on how much time you put into it.
You use that rod for some surf casting videos too right ?
what grip type is the phoenix black diamond rod is that split quirk?
Such a dope video man!
Thank you!
those jig eyes you can google for fishing tackle parts and find a sight for them
Cool! Didn’t know that
Totally awesome. Which pier is that????
Boynton inlet
@@connorlynch6437 Wow totally awesome. Thanks a lot. Wish we had fishing like this in Greece.
Try to make your own rod I did it and it was really fun
What was the final weight of the lurer
Did you have any leader, or no? If so what leader
You could use a Drumel tool….
So how long was the fish?
You should check Marling baits channel if you are into making lures, you can learn a lot about diy lure making from that channel, great video dude keep it up
There lots to learn! Thanks for the info 🤙🏼
@@RyanMorie the best trick is the super glue and baking soda imho
Love your channel man! But the odds of that fish surviving are very low. We drop those fish head first every time Bc they can get that giant burst of oxygen to get there blood pumping again! Nice fish it’s not Juno tho
1:03 I cut that thing twice and it’s still to short 😂
Super informative video as usual. Sorry to get off topic, but there are some serious plates hanging on that Smith machine, how much are you bench pressing these days?
Haha it’s a squat rack, most of the plates are for deadlifts though! I benched 305 my last week on active duty, but probably couldn’t come close to that weight now!
@@RyanMorie Sweet!
No way a bull red on the homemade popper
Woah I’m early 😳
Do a 2/4 lb test challenge off the pier come to dfp and I’ll challenge you biggest fish on 4 lb wins
What reel
@@isaacsalazar2026 would be cool to see a 1000 size reel challenge
instead of polyurethene i would of used marinetex
Haven’t heard of that, I’ll look it up!
seb ryan??
👀 👀
and sebastian kids still think they aint spoiled
Can you do a littler longer one mext time ?/ 6-8inch? To prove you dont meed to spend money like on the nomad poppers.?
What do you have against the Chug Norris?
@@Tyler-kw9ce nothing you know I’ve bought som like $200 worth and we went popping for tuna and we lost all of them 🤦🏻♂️😢😴, like for it to be $35-45 each i rather make my own you know like he said the fish don’t really care ab the looks is mainly ab the action now obviously they got good actions but i could get like 5-40 tsunami walking poppers but they a bit to small for the fishing we do
@@nelson442 I was just joking with you. And I feel that way about vertical jigs. Gets expensive quick losing them like that.
@@Tyler-kw9ce exactly 🤣🤣, like i seen a $350 popper at a shop in Galveston and i just turned around and walked back to the car like really ! For a popper! Like are you serious 😐🤦🏻♂️
@@nelson442 look up world's most expensive trolling lure sometime. It's insane. I copied this online. "The Million Dollar Lure has over 4,753 diamonds and rubies. It's got over 3 pounds of gold and platinum and over 100 carats of gemstones."
Florida hear got nothing against texas its hot as crap here in texas man😭🥵😩
Nahhhh! We’re dying over here 🤣🥵
RAT
I really enjoy your fishing adventures and seeing you catch the big one, but please try not to use my Lord and Saviour's name as a swear word. He died and rose from the dead for all of us so that we could have our sins forgiven and spend eternity with Him. Thanks, Ryan
Just stop posting vids bro exposing every secret