I usually do not comment, but I must on this video; it helped me out tremendously! It saved me money since BMW dealership charges so much for the most minute services (mostly labor); I was desperate to get the rear view mirror attached back on my 2010 BMW - it fell off due to the current heat wave. Anyway, the video was a great help and I was able to follow the instructions and got the job done! Thank you!
Thanks for making this video. We needed to review it several times near the end where you are reinstalling the mirror with the tension springs and the clam shell. Your advice that the clam shell could take a few minutes to a half hour was practical. It took us about 10 minutes or more, though I am not sure it was actually difficult. The mirror going back on did take some time. In the end it was perfect. Since this was "new to me" and the mirror was repaired, the key fob worked, the garage doors were programmed and we were quite happy. Thanks
We knocked the mirror off my wife's Honda civic and they now have the same nut, could not get it on at all but watching this video, simple as turning mirror, it's all back on now so thank you very much.
Great video, used it for my E90 and had the mirror replaced in less than 10 minutes. The hardest part was keeping the wires out of the way of the shroud. I was sitting in the passenger seat and couldn't see they were getting in the way.
I only needed to know how to replace the “clam shell” portion. Thank you for this video. I blame car engineering, how people who are so smart make fixing these things so incredibly complicated.
Great video, I have a 328i, the mirror fell off a few months ago, took it to a local dealership and was quoted $3000 for a new windshield because the mirror are “pre installed”.
So helpful. Thank you soo much !!! I was trying to get a lanyard that I hung off my rear view mirror off & it got pinched between the mirror & the housing, trying to get the lanyard I somehow removed the entire mirror 🤦🏻♀️ I was driving around with it hanging for days until I found your video! Thank -you🥳🤩
Wow, i was looking for this for my 2011 chrysler 300 and there were NONE! I said let me take a look at this BMW one since he mentioned a more up to date car... low and behold... It worked! Thank you for showing this video. For those 2011 chrysler 300 this twisting method works on our vehicles to. :) Thanks for sharing.
Hi Chris, Sounds like the mount to the glass must have came off for you. Sometimes you can get a kit and glue it back on but it is not always successful or lasts but I hope you are still good! Thanks for the posting!
awesome, thanks for this upload! I was able to reattach my rear view mirror to my windshield after my immature friend ripped it off after a spastic episode
Thanks for the rear view mirror video. It's nice knowing where one can and more importantly cannot use a lot of force. My mini and I thank you very much
My mirror jumped at me while cleaning the glass was ready to slam it bck on but fort I better check it's the right way. Your video showed me I wasn't....... Thanks for taking the time to do this video.
Hello, you did a great job explaining what the function of the red light under your Windshield does, however my question to you is what do I do when the light no longer works? I took the red cover off and the bulb appears to be a tiny filament type bulb attached to a wire but I can't find any type of a bulb or wiring kit to repair it, all bulbs burn out eventually so there must be some type of method to repair it, can you help me please? I have a 2004 330xi. Thank You Steven Lawson
Thanks for you video, I have a question I have two 2008 BMW 528I one of them is use to borrow parts for the one is running can I replace the rear view mirror mirror with the one that has the garage opener, they seems to have the same connector, please let me know thanks
Follwed your instructions to replace the mirror on my 2004 645ci Convertible with a one I got on ebay and now the remote doesnt work any suggestions-do I need to reprogram?
Hello, I have seen some issues with rain light sensors on older vehicles. They require coding and then initialization. If a shop has GT1 software that would be the best way. There may be some aftermarket scan tools that can do this as well like a high end snap on scanner.
@@AskTheCarExperts Thanks for the quick response. Garage with the right software I do that! I'm watching all your videos today related to e39 because trying to solve an issue more important than the rain sensor. Replaced leaking on top of the crankshaft sensor thermostat on M52 engine, replaced the crankshaft sensor because hard to start and stall after warms up. Lower hose after thermostat at the moment gets hard when cars warm-up (feels like a lot of air under pressure instead of being filled with coolant in it) INPA shows only Oil sensor defect, Light Modul error, Crankshaft sensor signal (engine temp -47.25 / Bat voltage 19.58V) I'm going to replace the water pump, check oil pressure sensor, coolant temp sensor, maybe unplug Oil sensor to see any difference.
@@Goliath2012Thai In most cases it is not removable. The glass can break when trying to separate it. In rare cases they separate on their own. I believe they are attached with a strong super glue.
My BMW E53 is it the same? Cause I unplug the cable but my key remote can't use anymore.The reason I removed the cable because it has a sound. So this rain sensor to gather with the key remote as well?
Hello Jeff, The key issue is going to something else as the rain light sensor does not control any remote functions. Issue scan range from a bad diversity antenna, a bad key, rear glass issue, or a general module issue.
thank you! watched the video and was able to remove and replace my mirror with no problem :) one question, you mentioned with convertibles, the unit is also the receiver for the remote controls. well, none of my remotes work now that i've replaced my mirror. any suggestions on what i should do next?
Ok! I have a what i think is a good question! :) I think my Red Flashing light went out? How can you replace that light in the middle of the red circle thats attached to the bottom of the mirror?? Great Video by the way!!
AskTheCarExperts Hmm. Can that piece attached to the windshield be replaced? I took off my RLS unit and can see that the other piece is glued to the windshield but didn't want to pull it off without knowing if it has any little cables attached to the windshield. Can I pull it off safely and replace it? My rain sensor/intermittent function does not work and I'm trying to assess which component is bad.
Unfortunately I do not think that part is replaceable separate from the windshield for purchase. In most cases it is the rain light sensor but it does require coding upon replacement and initialization so you will need to find a shop that can do this for you.
It is very difficult to snap this back in place when this comes apart. In most cases you will need to replace the mirror. It can be forced back in but it may break in the process.
What you need to do is place a towel on the ground, then put a little Vaseline on the ball joint and in the hole. Make sure all your wires are attached and not in the way (i.e. make sure they go in the hole as you are putting the ball joint into the hole). Then grab some pot holders or wash cloth for your hands and your going to basically use your body weight to press the mirror on to the ball joint. Be careful not to break it, but once I figured this out I got it right away! Good luck!
How do you recalibrate the rain sensor after replacement? I just had a new windshield installed by Safelite, now instead of intermittent wipers depending on rain, the wipers just go to "low speed" mode even if there's no rain on the windshield.
Hi Joe, You will need a scan tool that can perform a calibration reset. I would contact safelite as they may need to sublet it out to a shop that can do that for you.
Safelite tried a scan tool. Didn't work. Tried another windshield but still by Fuyao. Didn't work. I ended up removing the fuse for the rain sensor. This sets the wipers to intermittent mode controlled by the little wheel and apparently using the vehicle speed sensor. At a stop, the time between wipes is much longer than when in motion. So, I might just forget about the rain sensor.
I bought a 2005 bmw x3 3.0i The rear view mirror is hanging and I need to fix it but the small wires going to the Rain light sensor were pulled out from the plastic thing and I don't know in which order the go please help.
Hello, Those wires are not going to have the amperage rating you will need for your dash cam. Best to find a large gauge power wire and tap into that instead. If you go off the ignition wiring you may be able to have it turn off and on with key on and off.
The mirror may be on the K or I bus. If the rain light sensor is shorting internally it can bring down this communication bus and could effect the lights and steering angle sensor.
@@AskTheCarExperts Once I plugged the connecter back in, the turn signals began flashing again and the volume on the steering wheel works now. I didn't know that little connecter affected my turn signals
But what is that little thing BEHIND the rear view mirror casing ? There seems to be another sensor built in... you know it's a little white thing, really right behind it. Good video btw, I assume this is the same for E60.
my metal button fell out and i’ve tried super gluing it back to the window but whenever i try to put the mirror back on it it falls so no i’m trying to put the button on the mirror first but it jus doesn’t budge
wish these where gm vehicles, I would learn so much more. I only watch these just to watch you work. hahah I hope to be as efficient an professional as you.
:) I owned a GM for quite a few years until my brake lines all rusted out and I lost brakes on the highway in heavy stop and go traffic! Thankfully I avoided an accident. I did replace them all but there was so much rust it was only a mattery of time for the fuel lines to go next. Traded it in shortly after. Thanks for watching my videos and the great comments! I hope you have a great Holiday :)
Hi i have a question. I have a e38 and my wipers stopped working.....all fuses and relays under the hood has been replaced....water sprayer works. The mech i took it to couldnt find the problem, can you help plz?
Hello Mr Green, Most often it is the large relay in the E-box. I have also seen the wiper motors fail. You should check for power to the wiper motor. If you are getting power to the motor when turned on then the motor is defective.
My whole assembly fell off. and was hanging by the wires. Noticed that the class is ok but a big chip of the glass came out. Should I just epoxy it in? The reason it fell out is because of the extreme heat in the car the time.
DELIVERANCE just had my chip out behind the clip. Going to to remove mount and epoxy it back to windshield with a rear view mirror kit and then hopefully can twist back into place
Hello Mark, Funny you say that because the M3 in my recent videos about battery drain issues has the same issue. There is most likely too much play the mirror pivot. For this you will need to replace the mirror assembly. I hope this helps!
I have on my 320d on the bottom left side,some 3 buttons ( 1,2,3 ) and on left corner some red led light. I gues its for some setting,but i cant figure out what it is for. Someone know whats that used for ?
From 5series.net, "They are your Home Link buttons that can be used for such things as opening your garage door, but they might be able to be programmed for other uses. There is info in your owners manual to guide you through it, although some garage door opening remotes are harder to program."
Hello David, The only adjustment I believe is the sensitivity (light sensitivity) to get it to auto dim ealier. This would only be on earlier BMW's like the E46, E39, E38 et. There is no option to get the mirror to darken more than they are capable however. I have never done this but it may be an option under car key memory that could be done with a BMW programming station.
Maybe I’m super thick but.. where EXACTLY are the push tabs to remove connector ? On sides ? I can’t for the life of me get this thing off and it’s looks so simple ...
Hello Monica, Very sorry for the late reply. Sometimes the springs can be weak on the mirror and it may need replacement but I hope you where able to get it back on correctly.
I got the ball in by putting it on a table, then with potholders pushing the ball in... have to make sure all the wires are inside, those may be stopping the ball from snapping in. I still can't get the mirror reattached.... watching you struggle with it, no wonder!
Love this video. I went to two car shop both told me they dont know how to remove it. The one shop told me i need a new one $350. His price. I watched a free video. I think they see me as a little girl. Who had a BMW. $350 for used parts. You tube is the God of shit that is the shit.
Hi Martin, You are not wrong! They can be a pain. I am pretty used to the install procedure so I don't find it that hard anymore. I made this video quite a while ago because I realized it was a confusing process. I hope you where able to get yours off and on ok!
@@AskTheCarExperts The metal mount fell off the windshield and I had to experiment with several glues to get it back on. Regular rear view mirror glue absolutely does not work. Then I finally got a good gel glue that worked extremely well and I wound up gluing the mount in the wrong configuration 😧 So I had to heat the metal mount with a torch to be able to get it back off. Im going to try it all over again and hopefully I get it right this time 😆
![Kuinka vaihtaa takajarrusatula ja sen pidin OPEL VIVARO A Van -autoon [AUTODOC-OHJEVIDEO]](http://i.ytimg.com/vi/bm6zpZAjU4Y/mqdefault.jpg)
I usually do not comment, but I must on this video; it helped me out tremendously! It saved me money since BMW dealership charges so much for the most minute services (mostly labor); I was desperate to get the rear view mirror attached back on my 2010 BMW - it fell off due to the current heat wave. Anyway, the video was a great help and I was able to follow the instructions and got the job done! Thank you!
I ripped it out and didn’t know how to put it back on you just saved my life!!! 💪🏼😂 thanks so much man!
:) That is great to hear!
I feel you hahahaha
Same here! I was adjusting the rear view mirror and the whole thing came down.. struggled for about an hour
Thanks for making this video. We needed to review it several times near the end where you are reinstalling the mirror with the tension springs and the clam shell. Your advice that the clam shell could take a few minutes to a half hour was practical. It took us about 10 minutes or more, though I am not sure it was actually difficult. The mirror going back on did take some time. In the end it was perfect. Since this was "new to me" and the mirror was repaired, the key fob worked, the garage doors were programmed and we were quite happy. Thanks
We knocked the mirror off my wife's Honda civic and they now have the same nut, could not get it on at all but watching this video, simple as turning mirror, it's all back on now so thank you very much.
That's great! I should add Honda to the title ;)
Thanks dude. Fitted a new mirror in under half an hour. A lot easier and not broken thanks to your video.
Wow, I know this video is old, but I just bought a 2013 e93 and you saved me from a trip to the dealer. Thank you!!!
Awesome Rob! Your just have to know the trick :)
Great video, used it for my E90 and had the mirror replaced in less than 10 minutes. The hardest part was keeping the wires out of the way of the shroud. I was sitting in the passenger seat and couldn't see they were getting in the way.
Fitted a dash cam and managed to coil the excess cable behind the cover thanks to your video. Thanks for taking the time to upload.
+twangy That is great! I love it that my video helped! Thanks for the comment!
Only video that actually shows, and I can understand. Gonna have to try when I have daylight
I only needed to know how to replace the “clam shell” portion. Thank you for this video.
I blame car engineering, how people who are so smart make fixing these things so incredibly complicated.
:) Thanks for posting a comment
Thanks for posting - I really appreciate this and people like you are what TH-cam should be about, caring is sharing! 10/10 THANK YOU
Been driving round for 3 weeks with no mirror after I knocked it of with my head , thanks for posting the video
Great video, I have a 328i, the mirror fell off a few months ago, took it to a local dealership and was quoted $3000 for a new windshield because the mirror are “pre installed”.
I was struggling with the wiring - this was a great help 😊
Glad it helped!
So helpful. Thank you soo much !!! I was trying to get a lanyard that I hung off my rear view mirror off & it got pinched between the mirror & the housing, trying to get the lanyard I somehow removed the entire mirror 🤦🏻♀️ I was driving around with it hanging for days until I found your video! Thank -you🥳🤩
I love hearing feedback like this! Thanks for posting!
Wow, i was looking for this for my 2011 chrysler 300 and there were NONE! I said let me take a look at this BMW one since he mentioned a more up to date car... low and behold... It worked! Thank you for showing this video. For those 2011 chrysler 300 this twisting method works on our vehicles to. :) Thanks for sharing.
Ramon Escalera
Thanks a million, I tried this on my 525i series and was able to put my rear view mirror up by myself.
+Stedra Leaverette That is great! Thanks for watching!
Mine fell off on a msport e90. Had to glue back on. This is the only guide that helped out. Thanks
Hi Chris, Sounds like the mount to the glass must have came off for you. Sometimes you can get a kit and glue it back on but it is not always successful or lasts but I hope you are still good! Thanks for the posting!
awesome, thanks for this upload! I was able to reattach my rear view mirror to my windshield after my immature friend ripped it off after a spastic episode
Thanks for the rear view mirror video. It's nice knowing where one can and more importantly cannot use a lot of force. My mini and I thank you very much
Thanks for this video. I would have never figured it out by my self. Thanks again.
Hello Tuli, I am glad my video helped! Thank you for posting a comment!
My mirror jumped at me while cleaning the glass was ready to slam it bck on but fort I better check it's the right way. Your video showed me I wasn't....... Thanks for taking the time to do this video.
thelastdon247 Your welcome :) Thanks for watching!
Hello, you did a great job explaining what the function of the red light under your Windshield does, however my question to you is what do I do when the light no longer works? I took the red cover off and the bulb appears to be a tiny filament type bulb attached to a wire but I can't find any type of a bulb or wiring kit to repair it, all bulbs burn out eventually so there must be some type of method to repair it, can you help me please? I have a 2004 330xi. Thank You
Steven Lawson
Thanks for you video, I have a question I have two 2008 BMW 528I one of them is use to borrow parts for the one is running can I replace the rear view mirror mirror with the one that has the garage opener, they seems to have the same connector, please let me know
thanks
Good job man.You are really a BMW WIZARD.
Thanks for posting. I recently purchased my 3rd used BMW and the rain sensor is a little wonky. I now have a Saturday afternoon project.
Follwed your instructions to replace the mirror on my 2004 645ci Convertible with a one I got on ebay and now the remote doesnt work any suggestions-do I need to reprogram?
Great videos!
Wonder how to calibrate the rain sensor of my 1998 e39 528i I never had it worked sins I bought the car?
Thanks again
Hello, I have seen some issues with rain light sensors on older vehicles. They require coding and then initialization. If a shop has GT1 software that would be the best way. There may be some aftermarket scan tools that can do this as well like a high end snap on scanner.
@@AskTheCarExperts Thanks for the quick response.
Garage with the right software I do that!
I'm watching all your videos today related to e39 because trying to solve an issue more important than the rain sensor.
Replaced leaking on top of the crankshaft sensor thermostat on M52 engine, replaced the crankshaft sensor because hard to start and stall after warms up.
Lower hose after thermostat at the moment gets hard when cars warm-up (feels like a lot of air under pressure instead of being filled with coolant in it)
INPA shows only Oil sensor defect, Light Modul error, Crankshaft sensor signal (engine temp -47.25 / Bat voltage 19.58V)
I'm going to replace the water pump, check oil pressure sensor, coolant temp sensor, maybe unplug Oil sensor to see any difference.
my metal piece came off with my mirror, any tips to remove the metal piece from mirror itself? (the hex connector). Thanks!
Greate!!! I need to remove the anchor base, Is it glue or not?
It is glued to the windshield.
@@AskTheCarExperts thks, and how to remove it?
@@Goliath2012Thai In most cases it is not removable. The glass can break when trying to separate it. In rare cases they separate on their own. I believe they are attached with a strong super glue.
@@AskTheCarExperts Many thks.
Amazingly enough I didn’t watch this video before I mounted the mirror button and mounted it upside down. Any tips on how to remove it??
My BMW E53 is it the same? Cause I unplug the cable but my key remote can't use anymore.The reason I removed the cable because it has a sound. So this rain sensor to gather with the key remote as well?
Hello Jeff, The key issue is going to something else as the rain light sensor does not control any remote functions. Issue scan range from a bad diversity antenna, a bad key, rear glass issue, or a general module issue.
thank you so much.. after doing this my Daylight sensor not working properly .. can you help me to fix it or how to calibrate it again.. thank you.
Thanks for video! What is the part number of the Light/Rain sensor in this video?
Thank you very much for posting this. This is really helpful.
Hello Kon, Thanks for the great comment. I am glad you found my video helpful :)
thank you! watched the video and was able to remove and replace my mirror with no problem :) one question, you mentioned with convertibles, the unit is also the receiver for the remote controls. well, none of my remotes work now that i've replaced my mirror. any suggestions on what i should do next?
Thanks, very helpful video. I was familiar with the twist off mirrors, but couldn't figure out the rain sensor.
Good video I do like when the price of item is mentioned like the rain sensor etc ?
Ok! I have a what i think is a good question! :) I think my Red Flashing light went out? How can you replace that light in the middle of the red circle thats attached to the bottom of the mirror?? Great Video by the way!!
After you removed the RLS unit, there was a piece still attached to the windshield. Does that piece come with the windshield or with the RLS unit?
Hello Eduardo, Correct. On a BMW OEM windshield it will have the location for the RLS sensor. I have seen aftermarket windshields not have this piece.
AskTheCarExperts Hmm. Can that piece attached to the windshield be replaced? I took off my RLS unit and can see that the other piece is glued to the windshield but didn't want to pull it off without knowing if it has any little cables attached to the windshield. Can I pull it off safely and replace it? My rain sensor/intermittent function does not work and I'm trying to assess which component is bad.
Unfortunately I do not think that part is replaceable separate from the windshield for purchase. In most cases it is the rain light sensor but it does require coding upon replacement and initialization so you will need to find a shop that can do this for you.
The video was very helpful. However, what do I do when the rotating ball that attaches to the mirror is out? How do I snap it into place?
It is very difficult to snap this back in place when this comes apart. In most cases you will need to replace the mirror. It can be forced back in but it may break in the process.
What you need to do is place a towel on the ground, then put a little Vaseline on the ball joint and in the hole. Make sure all your wires are attached and not in the way (i.e. make sure they go in the hole as you are putting the ball joint into the hole). Then grab some pot holders or wash cloth for your hands and your going to basically use your body weight to press the mirror on to the ball joint. Be careful not to break it, but once I figured this out I got it right away! Good luck!
Amazing video,helped me tremendously
Thank you Roberto!
Bro your the best bmw of Fairfax was trying to get my to buy a $900 mirror when all I had to to was snap it back on
How do you recalibrate the rain sensor after replacement? I just had a new windshield installed by Safelite, now instead of intermittent wipers depending on rain, the wipers just go to "low speed" mode even if there's no rain on the windshield.
Hi Joe, You will need a scan tool that can perform a calibration reset. I would contact safelite as they may need to sublet it out to a shop that can do that for you.
@@AskTheCarExperts Thank you. I have another appointment with Safelite. I was hoping it was something I could do without a scan tool.
Safelite tried a scan tool. Didn't work. Tried another windshield but still by Fuyao. Didn't work. I ended up removing the fuse for the rain sensor. This sets the wipers to intermittent mode controlled by the little wheel and apparently using the vehicle speed sensor. At a stop, the time between wipes is much longer than when in motion. So, I might just forget about the rain sensor.
thank couldn't put it on without this
+mehmet aydin Glad my video helped! Thank you for posting a comment!
I bought a 2005 bmw x3 3.0i
The rear view mirror is hanging and I need to fix it but the small wires going to the Rain light sensor were pulled out from the plastic thing and I don't know in which order the go please help.
Can you send me the last seven of your vin number on my website www.askthecarexperts.com
I wonder if I can tie my dash cam power wire into those wires. What do you think?
Hello, Those wires are not going to have the amperage rating you will need for your dash cam. Best to find a large gauge power wire and tap into that instead. If you go off the ignition wiring you may be able to have it turn off and on with key on and off.
Hello, is the compass rear-view mirror for the Bmw X3 installed the same way?
What is the order to wire the wires to the box? I have a 2003 bmw 530i and it has 4 wires
That connecter affected my turn signals and steering wheel buttons.. are they connected?
The mirror may be on the K or I bus. If the rain light sensor is shorting internally it can bring down this communication bus and could effect the lights and steering angle sensor.
@@AskTheCarExperts Once I plugged the connecter back in, the turn signals began flashing again and the volume on the steering wheel works now. I didn't know that little connecter affected my turn signals
@@labonla519 Glad to hear unplugging and plugging it back in helped!
@@AskTheCarExperts I really appreciate your quick response and help
very helpful, you just helped me fix a clients car!
That is great!
The Toy Store a a s
But what is that little thing BEHIND the rear view mirror casing ? There seems to be another sensor built in... you know it's a little white thing, really right behind it. Good video btw, I assume this is the same for E60.
Hello S. T, It may be the light sensor you see or the LED for the alarm system. I think E60 is the same. Thanks for posting!
my metal button fell out and i’ve tried super gluing it back to the window but whenever i try to put the mirror back on it it falls so no i’m trying to put the button on the mirror first but it jus doesn’t budge
i’ve tried everything for it to go back in the mount but nothing works
You said that the sensor needs to be re-calibrated but you dont say how to do that. please help
I would like to know it too. Because, i have to change it in my car.
You saved my day!!!!
Great to hear that Micael!
wish these where gm vehicles, I would learn so much more. I only watch these just to watch you work. hahah I hope to be as efficient an professional as you.
:) I owned a GM for quite a few years until my brake lines all rusted out and I lost brakes on the highway in heavy stop and go traffic! Thankfully I avoided an accident. I did replace them all but there was so much rust it was only a mattery of time for the fuel lines to go next. Traded it in shortly after. Thanks for watching my videos and the great comments! I hope you have a great Holiday :)
you too, happy holidays!
Who knew changing a rear view mirror would be like a game of operation
Hi i have a question. I have a e38 and my wipers stopped working.....all fuses and relays under the hood has been replaced....water sprayer works. The mech i took it to couldnt find the problem, can you help plz?
Hello Mr Green, Most often it is the large relay in the E-box. I have also seen the wiper motors fail. You should check for power to the wiper motor. If you are getting power to the motor when turned on then the motor is defective.
Thank you. It is not exactly the same on my 545 but close enough.
My whole assembly fell off. and was hanging by the wires. Noticed that the class is ok but a big chip of the glass came out. Should I just epoxy it in? The reason it fell out is because of the extreme heat in the car the time.
DELIVERANCE just had my chip out behind the clip. Going to to remove mount and epoxy it back to windshield with a rear view mirror kit and then hopefully can twist back into place
Great video! My mirror is very loose (wobbly) how can I tighten it?
Hello Mark, Funny you say that because the M3 in my recent videos about battery drain issues has the same issue. There is most likely too much play the mirror pivot. For this you will need to replace the mirror assembly. I hope this helps!
this just saved my life.
Thank you for the great comment! Very glad you found the video helpful!
thanks so much! was able to reattach our mirror!
That is great Jeffrey! Thank you for posting a comment!
I have on my 320d on the bottom left side,some 3 buttons ( 1,2,3 ) and on left corner some red led light.
I gues its for some setting,but i cant figure out what it is for.
Someone know whats that used for ?
From 5series.net, "They are your Home Link buttons that can be used for such things as opening your garage door, but they might be able to be programmed for other uses. There is info in your owners manual to guide you through it, although some garage door opening remotes are harder to program."
Is it possible to adjust the auto dimming?
Hello David, The only adjustment I believe is the sensitivity (light sensitivity) to get it to auto dim ealier. This would only be on earlier BMW's like the E46, E39, E38 et. There is no option to get the mirror to darken more than they are capable however. I have never done this but it may be an option under car key memory that could be done with a BMW programming station.
Maybe I’m
super thick but.. where EXACTLY are the push tabs to remove connector ? On sides ? I can’t for the life of me get this thing off and it’s looks so simple ...
great video 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
Thanks bud! Glad you found it helpful. I should he making more E46 videos once it warms up a bit.
What to do if the whole assembly fell off my window and it chipped my window
Hello Jillena, You can purchase some adhesive but in most cases the windshield needs to be replaced.
I have a e60 and i had my front windshield replaced now the alarm light comes on and after a while turns off and idea
So what if the mirror is really loose/wobbly?
Hello, Thanks for posting. When the mirror pivot is loose the fix it to replace the assembly unfortunately. I hope this helps!
Oh, thanks for posting the video!
Thank you so much! This helped out a lot
Glad my video helped Stephen! Thanks for watching!
Thank you very much!
Your welcome Michael! Glad this video is still helping people!
I can not get mine to twist back on. What am I doing wrong?
Hello Monica, Very sorry for the late reply. Sometimes the springs can be weak on the mirror and it may need replacement but I hope you where able to get it back on correctly.
Thank you, you helped me so much!👍🏻Good job!
It worked for me ! Thank you
Program 325i remote controls in mirror
Thank you sir that was so great helpful
you swore less than me putting that mirror back on!
LoL They can be a pain!
wow another great tip!
thanks a lot for posting that. I appreciated a lot.
Thank you for watching Federico :) Glad you found it helpful!
I got the ball in by putting it on a table, then with potholders pushing the ball in... have to make sure all the wires are inside, those may be stopping the ball from snapping in. I still can't get the mirror reattached.... watching you struggle with it, no wonder!
Thanks for sharing!
great video
Thanks Marty! Glad my video helped!
Thanks mate
Under the windshield rear view mirror I meant to say
Omg i glued the button at the wrong angle, now my mirror is crooked
Oh man. I did that once too Dominic.
Tha I you very helpful
Great to hear my video helped!
Thanks you sir
I am surprised at how many people have needed this video. I am glad it helped you! Thanks for posting!
nice job
Thanks.....
Thanks
Love this video. I went to two car shop both told me they dont know how to remove it. The one shop told me i need a new one $350. His price. I watched a free video. I think they see me as a little girl. Who had a BMW. $350 for used parts. You tube is the God of shit that is the shit.
LOL That is great! I am glad my video helped you :)
Thanks for not using a torchlight during recoding- is very helpfully to see nothing in details... 🙄
Thanks for the comment. I will have to work on an improved video for this.
only thing i wanna see is a clean removal of the rain sensor lens. where's my video? aaaagh
65 thumbs down 👎🏼???!!!!! WHY?!?
:) Thanks Megan! Good question ;)
I broke my glass...yay.
Fin Elliott lol I just chipped mine 10 minutes ago then saw this video smh
Bok easy
Lol I broke the glass
Oh man, sometime that can happen. Twisting is the key to this mirror with very little downward pressure.
These mirrors are a pain in the butt and stupid design!
Hi Martin, You are not wrong! They can be a pain. I am pretty used to the install procedure so I don't find it that hard anymore. I made this video quite a while ago because I realized it was a confusing process. I hope you where able to get yours off and on ok!
@@AskTheCarExperts The metal mount fell off the windshield and I had to experiment with several glues to get it back on. Regular rear view mirror glue absolutely does not work. Then I finally got a good gel glue that worked extremely well and I wound up gluing the mount in the wrong configuration 😧 So I had to heat the metal mount with a torch to be able to get it back off. Im going to try it all over again and hopefully I get it right this time 😆