Making boats from foam using electric motors 30Km/h
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- Electric Sliding Brushless Motor 570KV 34 volt 2000 Watt 20000rpm
Electric skateboard speed control 180A 34 volt
Welcome to NASAT Channel!
I guarantee you will not be disappointed with the uploaded videos as there are some of the best videos that no one has done yet.
Thanks and hope you will enjoy and not be disappointed with your time spent watching my videos.
Support the channel by subscribing to see more great videos!
If you find it interesting, Like, Subscribe and comment on your questions and ideas, the channel will support and make great videos for you.
*Động cơ ván trượt điện 570KV 34 volt 2000 Watt*
*Điều tốc motor ván trượt 180A 34 volt*
*Electric Sliding Brushless Motor 570KV 34 volt 2000 Watt*
*Electric skateboard speed control 180A 34 volt*
Chế thuyền câu cá từ xốp sử dụng động cơ 570cc
Making a fishing boat from foam using a 570cc engine
th-cam.com/video/xFrsMrQ7MdA/w-d-xo.html
Anh chế thuyền lần nào cũng bị rẫy đầu 😂😂😂
Có làm tăg anh cái ván trược được k
kinh phí bạn làm như này tốn khoảng bao nhiêu tiền thế nasat
Chào bạn, cho mình hỏi hộp giảm tốc đó chế từ gì ra? Tên là gì vậy bạn
how much does it cost to build a boat that you spend. I love this boat. do you want to sell

This is excellent, you are definitely a very talented designer, fabricator and engineer, even building your own planetary reduction gearbox, amazing. You could be heading a small company and producing something like this commercially.
What is the gear box for?
@@Willyliemfams reduce rpm of electric motor to a suitable propellor rpm
Gearbox looks like factory-made
@@СавелийЕрмаков-с8б ya for me the gearbox is the most impressive piece of home made engineering here.
@@СавелийЕрмаков-с8б repurposed from a washing machine by the looks
Which motor is it please?
Electric Sliding Brushless Motor 570KV 34 volt 2000 Watt
Electric skateboard speed control 180A 34 volt
Thank you very much!
Кулибин! Молодец! Практически из ничего, получился катер!
не катер, а одноразовое говно на уровне детского сада.
@@_r_o_m_a_n
Let's see you do better !!!!!!!!!!
♿ 🇺🇸
@@_r_o_m_a_n говно здорова
как говорят у нас, из говна и палок. моторчик по моощней, веселее былоб.
Beyond words! Yes, very talented for sure and Love to get my hands on that Water Cooled Electronic Speed Controller for my 6-Foot PT311 Torpedo Patrol Boat. The project is just amazingly successful. Congratulations.
Excellent work! I am a Rc boat builder and can appreciate the creativity put into these boats!
Great job Mr. Nasat!!!
I have a few safety and improvement suggestions for your future project.
1. Not sure if you have it already, but for safety, can you make a kill switch attached to you, so that it you accidentally fall from boat, motor stops. It can be a switch that you step on or push with finger, when released, power gets cut off to engine.
2. Maybe your seat can be a bit lower so lower center of gravity to avoid capsize. But we can see you have very good balance and boat is very stable. Lower seat is more aerodynamic too.
3. I dont know if electric motor gets hot, if yes, you can use copper tube and make a coil on the motor and have water from the pump to cool the motor as well! :)
Keep up great work!!!
He litterly had a water cooled motor and a kill switch
you wont need a kill switch. he will already be dead from the alligators
@@rsk6929 no he had a water cooler speed control
@@topcat26ft Thanks for explaining. Quick question could he have made the coil longer and cooled them both on the same line
I have a ride on mower where the kill switch is under the seat. It means you can't start until you are seated but if you fall off it cuts out.
Bán lại cho anh hé
Em không có bán nha anh, mong anh thông cảm!
Thankyou for that, I knew you wouldn't let me down for cheering me up!
Very impressive!
Thank you very much, I will try to do better, hope you guys support!
Well done, great design using mainly materials that are available in any DIY store. Compliments. Regards Sander van der Voort from the Netherlands.
Fantastic work. Great design and building. You could work anywhere with your skills
Thank you very much!
I love your concept man! Awesome idea worth money copyright it fast.
Little advice from a former surf board maker: Thin plywood veneer strips down length of foam form strengthens end result greatly. One wouldn't work due to propeller shaft so two "stringers" would be optimal.
He basically made a electric surfboard! I remember those jetpowered ones of the late 70s/early 80s, they were much slower and not worth a damn, I knew a family that had 2. I wouldn't try surfing on one, but this is probably much lighter! Could probably surf some small ones with it
It's so nice to invent what's good for you without relying on anyone else.
This is the first vid I have seen of yours and I have one thing to say: you're a genius. You built something very functional and made it look like so damn easy. It's the fact you can do something on this level so effortlessly that marks you special. You have a new subscriber. You have kick started a part of me I thought had died: creativity. Thank you!
Superb brother !!
Thank you very much, I will try to do better, hope you guys support!
Please how much rpm has output shaft? I see tha motor has 25000rpm but how much rpm has shaft. Thank you.
Motor shaft is 6mm, thank you very much!
I love your project. Well done :) Tell me please: what is real range on batteries that you have in the boat?
Tốc độ được bao nhiêu e
Em cũng chưa đo tốc độ nữa anh, trung bình khoảng 20km/h đổ lên anh
Cảm ơn người bạn đã chia sẻ một thiết kế hải lý đặc biệt khác về khả năng sáng tạo và phát minh của bạn. Bạn làm gì với những chiếc thuyền bạn đã đóng, bạn có bán chúng không? 🥇
Thank you very much, I will try to do better, hope you guys support!
I don't sell boats, because I want to recycle them for future videos and use them as a better experience
Nó nhanh hết pin ko anh
Sử dụng pin lipo dung lượng nhỏ nên khá nhanh nha bạn, nhưng cảm giác không hao pin nhiều bạn
LOVE IT! Keep doing what you do!
Thank you very much, I will try to do better, hope you guys support!
Another awesome project with BLDC motor , very cool , I meant water cooling too ! Why is the chief engineer " the dog " not featured in this project ? Hope he is ok .
Thank you very much, I will try to do better. My dog is doing fine and she just gave birth so I can't let her experience it!
@@Nasatchannel Best wishes to mother dog and puppies !
@@apktsang Thank you very much!
What are those blue things floating in the water for
sorry, I don't quite understand what you mean
Outstanding build. I can tell that you put much thought and experience into this. Thank you very much for all the work you put into this video to share the build process.
Good selerr
Thank you very much!
Motor tí xíu mà qua tải khỏe dữ thần
Đúng vậy bạn, motor nhỏ chỉ đi được chân vịt nhỏ không có sức qua giảm tốc chạy được chân vịt lớn hơn nên mạnh. Cảm ơn bạn rất nhiều nha!
I am amazed at the simultaneous simplicity and skill in this design and build. Great job!
I’d buy one of these if I was able to. Great work, well done!
Thank you very much!
Message to the one person who clicked “dislike”. Why?
Thank you very much, I will try to do better, hope you guys support!
Very good work! What is battery life for the two batteries? You could probably take a pretty long journey if you brought a couple of charged batteries with you.
Make more Booat 775 mothers
Thank you very much!
Fantastic! Very good design and fabrication skills. Have you tested the range at various power settings?
Đúng như em muốn anh chế hay quá 👍cảm ơn anh nha 😁👍😋😘🥰
Cảm ơn em rất nhiều nha!
EASILY the best water vehicle in the universe. Yes, better than any other possibilities of any watercraft that we can't even imagine....better than those too. LOL!
Спасибо вам за идею и уважение за осуществление проекта.
/ If the TITANIC had been made in this way, it would still be floating:))))))))))💪😎
Where do you purchase your propellers?
Where do you purchase your fiberglass materials and resin?
Some of his plastic propellers seem to be 3D printed coated with resin, and I guess you can get EPS foam, fiberglass and resin pretty much in every hardware store in Vietnam, one of their main transportation is with boats so these materials are very common.
Wow thanks for posting unbelievable you must be aerospace engineer but you did good watch the whole thing enjoy
Awesome job! This looks like something you'd have to pay a couple thousand dollars for in the US.
Thank you very much!
Amazing I presume the batteries only lasts about 10 minutes but awesome 😁
Thank you very much, I will try to do better, hope you guys support!
if operating at 50% capacity, 5000mah battery can go for 20 minutes
It's Very important! Autonomy!!! Good point!
Cho mình hỏi là bạn đã dùng keo gì để dán xốp w? Cảm ơn bn nhiều video rất hay lun ủng hộ bn!
keo composit với sợ thủy tinh mà này sợ vãi trống thấm
Poderia descrever qual material usou para fazer essa prancha? Estou falando somente do isopor, e não do motor! É isopor de que tipo? E a tela que colocou para passar a fibra de vidro?
Só uso espuma normal, a fibra de vidro que uso é Roving 360, e resina epóxi para a pasta, resina epóxi não danifica a espuma, muito obrigado!
@@Nasatchannel espuma na sua língua é isopor, ou espuma mesmo? Qual tipo de espuma? Na Internet procuro a espuma de qual qualidade e tipo?
Video của chú được nước ngoài ủng hộ quá =))), chúc chú thành công
Tốc độ chắc cũng dc 20km nhỉ
Chắc cũng cở đó đấy bạn, cảm ơn bạn nhiều nha!
Anh làm võ thái lan đi
Cảm ơn bạn rất nhiều nha!
Amazing design and engineering project . You are talented, and very resourceful! Thank you loved this film !
Thank you very much!
interessante projeto, mas pode ser melhorado. Não sei das suas possibilidades, mas o ideal é outro tipo de motor, de preferência um que não necessite da planetária para redução das rotações, pode usar um de bicicleta , vc teria muito menos perdas e barulho tb. Outro ponto, e é na estrutura, nada contra o isopor, mas vc precisa colocar ao menos uma longarina de madeira ao longo da estrutura, eu colocaria 2, e antes de cobrir com fibra, embrulha em papel ou fita adesiva, ou a resina acaba por gerar lacunas no isopor.
Metal e água não se dão muito bem, na medida do possível tentar usar menos ferragens, sobretudo para o controle do leme, o que vc fez ficou bonitinho mas aquilo não vai durar.
... Outro ponto, e vc já deve ter percebido isso, é conveniente ter um remo a mão....
No mais parabéns pela criatividade e técnica, foi um belo projeto.
Muito obrigado, vou aprender com seus comentários e melhorar para fazer melhor!
@@Nasatchannel you are very talented and take criticism well. I'm sure you knew where to make this boat better but probably used what you had on hand. Amazing
Quá giỏi
Cảm ơn bạn rất nhiều nha!
Feel free to drop some details about your motor and ESC.
Electric Sliding Brushless Motor 570KV 34 volt 2000 Watt
Electric skateboard speed control 180A 34 volt
Thank you!
That a good boat.. if you can gitf a detail componan and item to make a boat, it much better👍.. because i can learn from you how to make a safety boat..
Thank you very much, I will try to do better, I've recorded what I use in the comments
Really amazing work. I am hoping to build a kayak from foam. Can I ask a couple of questions please?
- At 4:25 the hull has gone from white to grey. What have you coated it with at that point?
- What is the thickness of the foam you have used...is it 2 x 50mm?
Thank you!
The grey coat is epoxy primer. Paint doesn't typically bond well to bare fiberglass epoxy so the primer acts as a bond coat and an extra layer that can be sanded to remove flaws in the surface finish
Это был волшебный тайский порошок, растворенный в слезах тайских девственниц. Благодаря ему лодка двигается в 5 раз быстрее.
Hi!! Congratulations by build of the electric board.
Лайк в поддержку канала
Удачи тебе 👍
Большое спасибо, я постараюсь сделать лучше, надеюсь, вы, ребята, поддержите!
Sir is this suitable at sea cause i want to go fishing
Hi, it's a bit small when going to the sea, you can make it bigger with a good machine and more to go to the sea, thank you very much!
👍
đổ keo lên xốp không bị chảy hả bạn
Mình sử dụng keo epoxy để dán, không epoxy không là hư xốp bạn
Gulf racing blue & orange. Second top favorite of your boat builds
Thank you very much, I will try to do better, hope you guys support!
@@Nasatchannel I'm sorry if I worded thing wrong... you doing great only to me this is 2nd of 2 favorite baiting videos... I love them all
Bạn làm khóe tay và rất công phu nên sản phẩm rất đẹp
Tuyệt vời ban nhé 👍😀
Cảm ơn bạn rất nhiều nha!
Qual tamanho do casco?
Quá tuyệt vời
Cảm ơn bạn rất nhiều nha!
Solar powered next.
Thank you very much!
another great build! wow!
Thank you very much, I will try to do better, hope you guys support!
More explaing about the purpse in the 2:29?
Thanks.
The switch to electric power is impressive! I especially liked the wire foam cutting. You made it look so easy. I know it will annoy you that I keep asking this but I still want to see you make a hydrofoil. Please! 🙏
Thank you very much, I will learn and experiment, submarine is a difficult project but I will try, hope you guys support!
@@Nasatchannel hydro foil is not a submarine
@@jimbeck553 come on, I guess the TH-cam translation is not correct, the same with Google very often.
hydro foil would be really cool
Trc khi phủ keo composite bạn phủ keo gì lên trước vậy. Vì keo composite làm chảy xốp
Mình dùng keo Epoxy dán lên xốp trước nha bạn
Классные у тебя лодки. Молодец👍
Большое спасибо, я постараюсь сделать лучше, надеюсь, вы, ребята, поддержите!
Очень круто!
Amazing and excellent craftmanship. Vietnamese people can make anything and do it so well. Miss Vietnam 🇻🇳 From SA 🇿🇦
👍
A catamaran made from foam would be really interesting also a Thai flyboat motor would be more kikass !!!!! XP
Спасибо большое за видео, очень понравилось. Сделайте пожалуйста подробное видео о о двигателе, редуктора итд
Большое спасибо! я сделаю это
@@Nasatchannel ждём, спасибо зимой тоже надо заняться
151 people are pissed because they spent hundreds of $ for boat like this. Nice project.
EDIT: There should be voltage meter outside box with engine and paddle just in case run out of batteries :)
Thank you very much!
I will stammer more and try to do better.
What a great project I wish I could do something like that
If you make it a surface drive it’ll go 60 km/h Truly an awesome job you did on the boat I enjoyed watching please tell us what you used to make the gear reduction
you have some serious potential to make many great things!
amazing job
Thank you very much!
Realy a beautiful build .love the gulf colors 😃❤️
Where do you buy your epoxy in Vietnam 🇻🇳????
👍👍
I realy like what you have done as for me I would like to make a few design changes only to make it more suitable for fishing as well as the ability to Carey bigger cap batteries. Don't get me wrong your basic design is brilliant and thay is the buty of it. The simplisty giveing the unending ability of personal choice designe models. All you need is a good marketing person and build a few solid models to choose from and the sky's the limit and your future is what your willing to make of it. Your a lucky man to have that in your hands. I can't wait to see this in the future in all sports and leisure shops every where...
I’m impressed you got it all done in 22 minutes 💪🏼
He edited the video
I tried fiberglass resin on foam before and it just chemically melted the foam. Did I use wrong resin or foam? Beautiful job you did!
styrofoam works with epoxy resin here. polyester resin would melt it.
max mackinlay I must have had polyester. Thanks!
Awesome. You answered my thoughts on how I’ll build mine
Thank you very much!
✌✌👍👍👍👍👍👍👍👏👏👏
Lemans gulf livery!
Excellent thank you
Thank you very much, I will try to do better, hope you guys support!
Very good. The motor is small so you put a gear on it. Hot wire cutting FREEHAND. Speed-up video. Fantastic. We love you man.
Wonderful! Each boat gets better and better.
Nice good job, maybe you can add some solar cells system for rechargeable the battery for longer period of use.
Thank you very much, I will do it!
Quantos kg (peso) ficou? Tentou ficar em pé pra testar a estabilidade se é boa? Ficou show
ad cho mình hỏi..keo composite lăn xốp nó ko bị ăn mòn vậy.. em làm như vậy nó bị ăn mòn
mình sử dụng keo epoxy để dán sợi thủy tinh, keo epoxy không làm hư xốp nha bạn
Excellent project. If you want to go bigger next time how about a solar boat? Could you build an all-foam catamaran? That would give enough area topside for solar panels. Speed is less important than if you could demonstrate continuously running solar power.
Good idea my friend but the place you built the boat is now polluted with a lot of chemical trash and poison. Take care, also your dog ;)
Thank you very much!
Very good mate. Great to see. And happy your hard work has paid off. I would recommend some paddles just incase your battery dies on you. But good work 👌🏼😉
I love this! He cranks out an adapted planetary gear idea in a jiffy, and taps it all together on a beat up table! Gitt'er done and mak'er happen buddy!!
I love your work
Thank you very much, I will try to do better, hope you guys support!
Great 👍🏽
Wow Really it’s amazing . Good job brother 👍🏽💚💛❤️
Thank you very much!
Просто нет слов,мастер!
Большое спасибо, я постараюсь сделать лучше!
А вы хоть поняли что он сделал
Where can I buy one of these propellers?
Cara perfeito 👏👏
Muito obrigado, vou tentar fazer melhor, espero que apoiem!
I tried to combine 9ft inflatable boat and MinKota Endura 3 (it came with MKP-2 propeller).
As I am just a grandpa who tried to impress his 4 yo grandson, I was disappointed with the very slow speed (and he wanted it "faster" too)...Another disappointment came when the seller/maker could not give me any advice on how to improve the speed (I expected an advice like "use a different propeller" and/or "use two motors"...).
This hobby design is so much better than what I have (even though I spent at least 5 times more money).
Can you, please advise me on the combination of rpm/propeller ...I think I can manage choosing a motor and transmission if necessary?
Nice work! I like these videos. A couple of possible Improvements:
Lowering the drivers seat will lower the Center of Gravity. This will improve stability, in turns and at rest..
Narrow the stern, like a canoe, and you will improve speed.