Your soldering technique is absolutely flawless. Your Grandfathers tutoring and your obvious reception to his technique results copper foil work that is beautiful!! I’ve worked with stained glass, foil and lead, over 40 years and very, very few individuals possess your soldering ability. I’d love to see some of your larger panel work displayed on You Tube too.
Oh you're too kind, thank you! Nothing's flawless, but I've worked hard to improve my soldering over the years, so I appreciate you noticing my technique.
I gifted my granddaughter with a 12 hour stained glass class for her 14th birthday and took the class with her. She enjoyed herself but I'm hooked! My problem is that I am a perfectionist and beading has been my downfall. I tend to go back over and over the solder until my foil is melted. I suspected this would happen so I wisely used practice pieces. I was so excited after I watched your video and wanted to tell you that of the dozens of stained glass artists I've watched your beading and the instruction is by far the best. I'm going to heat up my iron (same as yours) and do some edge beading.
Omg what an amazing gift to give your granddaughter! Also very exciting that you're hooked now too! This craft can definitely be a little frustrating for a perfectionist - believe me, I understand! Just remember not to be so hard on yourself, no one sees the imperfections as critically as ourselves. I'm so happy to hear you found the video helpful, and I hope it helps your beading! Remember, you can always use hobby came if you don't want to do edge beading!
@@SamanthaAshleyGlass Thank you for the encouragement. I went back to my beading and I progressed some but my other big fault is impatience. I didn't allow enough time for the solder to set a little and I was also compelled to "fix" the places where blobs of solder met. In watching your video again and again and going back to other artists' videos that were skilled I can see that this seems to be the way the process plays out. After a night of soldering in my sleep I'm ready to get at it again this morning.
I'm the same way! I go way too fast and I'm so impatient. I've only done 10 pieces and I expect to have the skill of someone that's been doing it 10 years. I need to give myself some grace and practice!
I’m so grateful for this video! I’m currently in a class and we haven’t learned this at all. I decided to make a piece at home and tried to tin and make it look nice, but now that I have seen your video, I am hopeful I can actually do it with beading. Thank you, thank you!!
Your technique is one of the best. You are good at teaching. I share this video on all the Facebook Stained Glass groups, whenever some anyone asks about edge beading!
Thank you for providing us with this video... I have been doing panels for the last few years and now attempting to do Sun Catchers or free form projects... Your technique and soldering is excellent and is exactly what I was needing to move forward! Thank you I appreciate your style - it was as if you were right here showing me! 🌺
New to stained glass. Just made my first piece three weeks ago. After taking my first class, this technique may take longer but it looks so much better than dragging the edges. Thank you for sharing.
This is another fab tutorial. I've started finishing with black patina now and, after watching one of your previous videos where you say to use wire wool, wow - what a revelation! My patina looks so good now, it really has made such a difference. Now I know how, I'll start beading my edges properly too 👍 Thank you so much.
That's so great! Really thank you and your video, it has taught me a lot of things in glass edge welding techniques, it is very helpful for my work in Vietnam. Wishing you lots of luck in your work!
Once again, I wished I would have seen this video at the very beginning of my journeys, as it drove me crazy trying to figure out how finished pieces achieved this look!! I didn't even think to set the temperature down on my soldering iron! A couple questions: For edge bead soldering like this, does gel flux work better than liquid flux? I find myself reapplying liquid flux sometimes as it seems like it evaporated, or dried up as I'm moving along. Also, I have a whole spool of solder that looks like it has oxidized or whatever as it's been sitting my my garage and this summer has been a HOT one. Is it still fine to use? Do I need to do anything to it to make it usable, or do I just need to purchase another spool and do a better job of storing my soldering supplies? Thanks so much! Honestly you are one of the best stained glass artists I have come across so far on youtube. If you created classes, I would 100% completely sign up!!
Thank you so much for your kind words! As far as flux, it doesn't matter. If you use gel, you can pretty much flux the whole edge and go, but if you use liquid flux, I'd flux a little section at a time, as it does dry faster than gel or paste. You can still use oxidized solder (I had some pretty old stuff from my grandpa that was somewhat oxidized). Try it out, if it gives you issue, you can unspool the solder in sections and steel wool it a little to make it useable again)
Very good, This is the part I struggle with. Plus when I see Stained glass pieces for sale ,, I notice the soldering, most of the time, it’s messy. Yours is gorgeous
90 percent sure that was black magic, thank you so much for making the video. two quick questions. when you decided that you needed more flux what signs indicated that you needed flux? when i try to build up my bead it will spill over the sides how does yours not spill over? I do have my iron at 360°c
Haha you're welcome! When I'm tapping the solder, if it starts getting lumpy/forming peaks, that means I need more flux, cause the flux allows the solder to flow and stay smooth. Make sure you tin the front and back edges first, I feel like that gives the solder a base to grab onto so that it doesn't just fall off (I don't know if that makes sense, lol). Make sure you're not lingering with your iron too long, that's the only reason I can think of why the store would fall.
It's mostly just a personal preference, and depends on the project. I usually prefer the look of beading the edges of my smaller pieces (specially on my flowers, just cause it looks more organic), but I'll use came on larger pieces. One reason to bead the edges instead of using hobby came though is if you're wanting to apply a copper patina, since the patina doesn't work on lead.
@@RockAndRoadkill I use the smaller tip when I'm soldering smaller suncatchers with lots of small pieces, and I'll use a 5mm tip for larger pieces. It's just a preference 🤷🏼♀️
Thank you so much for this video! I am just starting out in this craft and am really grateful for your clear and thorough instructions. I was just wondering, what glass did you use for this project?
I've just recently come across your videos and they're very helpful, thank you! I too think your soldering is excellent, and I've noticed that you never seem to have black "bits" appearing in your solder lines; would know by any chance why this might be happening to me? Perhaps I'm using too much flux? Thank you again!
Hi! Thank you! The black bits are from flux - are you using liquid flux (I feel like the black bits happen more with liquid flux?) Try using less flux, or a liquid or paste flux, and just keep wiping off your iron tip multiple times while you're soldering.
I loved watching this video, I've never done this but can't wait to try. It's so beautiful! Just wondering if you can use a heatgun afterwards and do an allover heat blast to smooth all the lines and make them more continuous?
Great video. I’m a beginner and tried to do some edge beading. It went ok-ish, I need to keep practicing. Whenever I came to one of my seams, the edge beading affected the look of my piece’s beading on the front and back. I’m having trouble making it look nice where solder lines meet. Do you have any tips for where the edge beading meets the piece’s solder lines? Or any tips in general about making solder lines connect smoothly?
@@EmilyPahl-j7y I know exactly what you're talking about. After I'm done edge beading, I put my iron temp back to 410° and lay my piece flat, then any joint that got messed up just gets a little flux, and then I grab a little solder and hold it on the spot for a sec to fix it.
I suppose personal preference. I like using a 3mm tip for most of my projects that have smaller pieces. I'll use a 5mm tip on larger panels, or if I'm using 1/4" foil for thick solder lines. 360°c for edge beading, and 410° for everything else
Hi! So here's a link of everything that I actually use in my studio (it's a big list, the more you work with this medium, the more tools and supplies you accumulate). (www.amazon.com/shop/samanthaashleyglass ). The brands and types of supplies you get depends on the budget that you're working with, I would say though, that the bare minimum of what you need for a beginner is a small grinder (doesn't have to be anything large or fancy), a cutter, running pliers, 7/32" foil, flux, soldering iron, 60/40 solder (or lead-free if you prefer, though it's more difficult to work with), flux remover (or dawn dish soap), wax, and safety gear like goggles, gloves, etc. You can look at a number of stained glass websites like Delphi, and Anything in Stained Glass, as they have beginner kits you can purchase.
I noticed you turned down the temperature to solder the edges, but why? I’m still a beginner and I want to understand the why’s, not only the how’s. Great video and presentation. Thank you so much!
@@ellengreenlund3905 I turn the temp down so that the solder doesn't get as hot, and it cools quicker. If the solder stays too hot too long when edge beading, you'll have more instances of the solder falling off the edge, unless you go super super slowly and carefully. When I turn the temp down, I can edge bead a little bit quicker (still takes time though)
@@SamanthaAshleyGlass thank you. I’ll try that on the first piece I’m finishing. It’s a butterfly with lots of curves. Why do I pick such a hard pattern, LOL. Next time it’s mostly straight edges for me!😊
I have a black patina tutorial on my page, if you want to check it out. It is slightly different than the way I did this one (I'll make a video for the super shiny patina too). The key was scrubbing the solder seams with magic eraser and Dawn before applying patina, and skipping steel wool.
That's a valid question! I'll try to explain it the best I can. Since the solder only sticks to the foil and not the glass, the foil acts as a barrier. So when you tap solder on the side, it sort of spills over onto the front and back of the glass, and starts to solidify as it reaches the edge of the foil barrier. That's why you have to go quick though, if you hold your iron on the edge too long, it'll keep the solder liquid, and then gravity will cause the solder to fall off the edge. In most cases, when solder falls off the edge, it doesn't "bond" with the solder lines that it hits - you can usually just flick it off with your finger or some tool. If it doesn't come off, you'll just have to go over that spot with your iron.
Great video instruction! You have a talent for this creative work! My like and subscribe to you! Keep making beauty! You are doing great! I wish you creative inspiration! Best regards Mr.Hi! :)
Completely new here. When you show the example of the 'just tinned' section.. What do you mean by this? Because to me it looks like you are doing the same thing (but obviously with a different result. Flat not rounded). What is the difference?
@@JordanWade-hj5ns just tinning means you're using a lot less solder, and basically doing a quick pass just to coat the copper foil with some solder, you're not actually building up the bead. If you leave it tinned, you have a weak (and unfinished looking) edge.
I've been using the same technique and temp for all of my edge beading, but I'm still having issues. My solder runs even if I'm beading a flat level line. It'll flaten out to the sides and often run off the front or back. Does type of flux make a difference? Mine is liquid, not gel. Its the only difference i can think of besides just needing more practice.
Are you by chance using a standard iron tip, which is usually pretty large, like 1/4"? Edge beading can be more difficult with a larger tip (larger surface area, more heat, more solder, so greater chance of solder falling off the edge). If that's the case, you might need to try using less solder, or turn your iron even lower. I mostly solder with a 3.2mm tip.
These are the gloves: amzn.to/3PvGzh8 The solder is Amerway 60/40 www.swartglass.com/Amerway-6040-Solder--Bulk-PricingbrBuy-5--1595brBuy-25--1450_p_10118.html
What temp are you using, and what flux? I use a lower temp for edges (360). Make sure your edge is pretty level, cause even if it's tilted towards you or away from you, that can be enough for gravity to "spill" the solder over the edge.
There are a few things that could be happening. You might be tilting your piece towards you, thus allowing gravity to spill the solder over. Or you might be lingering too long, and too much heat is going to one spot. You want to bead slowly in a tapping motion, then let the solder cool for a few seconds. I also find it easier to edge bead with a smaller tip (I like to use a 3mm tip)
Do you know why I can't grab a glob of solder? It just slides off. My tip is clean and freshly tinned. Also, when I pick up my iron, the solder doesn't pool, it leaves a hershy kiss point on it.
The Hershey kiss point is usually an issue of not enough flux. As far as why you can't grab a glob of solder, if your tip is tinned, you should be able to grab the solder, unless you're grabbing too much and gravity just isn't having it.
@@SamanthaAshleyGlass thanks for the quick reply! Is it possible my iron isn't hot enough? I've got fresh Flux on there but it's still leaving points when I lift
@@SamanthaAshleyGlass that's what it is! I only have 1-10, not Temps so it's hard to know if you're not experienced I guess. Your video was super helpful thank you!
Your soldering technique is absolutely flawless. Your Grandfathers tutoring and your obvious reception to his technique results copper foil work that is beautiful!! I’ve worked with stained glass, foil and lead, over 40 years and very, very few individuals possess your soldering ability. I’d love to see some of your larger panel work displayed on You Tube too.
Oh you're too kind, thank you! Nothing's flawless, but I've worked hard to improve my soldering over the years, so I appreciate you noticing my technique.
Thank you for this! I have been trying to figure out how to get a nice beaded edge for months. You’re an excellent teacher. Keep the videos coming 😃
The real time demonstration of how you form the bead is really helpful. Thank you for another great video 🥰
Oh good, I'm glad!! 🤗
This is one of the best soldering videos I've seen. Great job and beautiful rose.
Great!! Thanks!! I searched and found your general soldering tutorial...THANK you!! I have the MOST trouble with that part!
I gifted my granddaughter with a 12 hour stained glass class for her 14th birthday and took the class with her. She enjoyed herself but I'm hooked! My problem is that I am a perfectionist and beading has been my downfall. I tend to go back over and over the solder until my foil is melted. I suspected this would happen so I wisely used practice pieces. I was so excited after I watched your video and wanted to tell you that of the dozens of stained glass artists I've watched your beading and the instruction is by far the best. I'm going to heat up my iron (same as yours) and do some edge beading.
Omg what an amazing gift to give your granddaughter! Also very exciting that you're hooked now too! This craft can definitely be a little frustrating for a perfectionist - believe me, I understand! Just remember not to be so hard on yourself, no one sees the imperfections as critically as ourselves.
I'm so happy to hear you found the video helpful, and I hope it helps your beading! Remember, you can always use hobby came if you don't want to do edge beading!
@@SamanthaAshleyGlass Thank you for the encouragement. I went back to my beading and I progressed some but my other big fault is impatience. I didn't allow enough time for the solder to set a little and I was also compelled to "fix" the places where blobs of solder met. In watching your video again and again and going back to other artists' videos that were skilled I can see that this seems to be the way the process plays out. After a night of soldering in my sleep I'm ready to get at it again this morning.
I'm the same way! I go way too fast and I'm so impatient. I've only done 10 pieces and I expect to have the skill of someone that's been doing it 10 years. I need to give myself some grace and practice!
I like this so much more than the idea of hobby came, more solid and better looking.
I’m soooooo glad I found your videos!!!
You make that look so easy! Beautiful! Thanks for the tutorial!
I love the close up views. I can see exactly what you are doing! Thank you so much! Please keep posting these wonderful videos!
You have set the bar for me. Your soldering is absolutely stunning!! Thank you 😁
It makes sense, the most important part is lowering the temp. I never would have thought to lower it to 360 though. Thanks! 🙂
Ya I has that problem too, I couldn’t get a true round edge it just flattens out or drips :( gonna try lowering the temp more!!
I’m so grateful for this video! I’m currently in a class and we haven’t learned this at all. I decided to make a piece at home and tried to tin and make it look nice, but now that I have seen your video, I am hopeful I can actually do it with beading. Thank you, thank you!!
Your technique is one of the best. You are good at teaching. I share this video on all the Facebook Stained Glass groups, whenever some anyone asks about edge beading!
Thank you, I'm happy that this video has helped so many people!
Thank you for providing us with this video... I have been doing panels for the last few years and now attempting to do Sun Catchers or free form projects... Your technique and soldering is excellent and is exactly what I was needing to move forward! Thank you I appreciate your style - it was as if you were right here showing me! 🌺
I'm so happy to hear that you found this video helpful! 🤗
New to stained glass. Just made my first piece three weeks ago. After taking my first class, this technique may take longer but it looks so much better than dragging the edges. Thank you for sharing.
This is another fab tutorial. I've started finishing with black patina now and, after watching one of your previous videos where you say to use wire wool, wow - what a revelation! My patina looks so good now, it really has made such a difference. Now I know how, I'll start beading my edges properly too 👍 Thank you so much.
If you clean with baking soda the patina will get darker
That's so great! Really thank you and your video, it has taught me a lot of things in glass edge welding techniques, it is very helpful for my work in Vietnam. Wishing you lots of luck in your work!
Great camera work! Nice to see close-up views.
Thanks! Sometimes it's hard to solder while filming so close, but it's important to show exactly what I'm doing. 🙂
Thank you. You do a beautiful job.
very nice edge work. thanks for showing it.
Thank you 🙂
Omg!! You make it look so easy!!
Thank you! This is just what I needed. Now I'm going to give it a try.
You're welcome, good luck!!
Really appreciate this video! I was having trouble covering 20 g wire around pieces and this technique works beautifully!!! Thank you so much!😄
Yay! I'm so glad you found this helpful 🤗
Great instruction! Thank you for posting this!
I definitely learned a few things here. Thank you
Oh that makes me happy! I'm glad to be of some help 🙂
Once again, I wished I would have seen this video at the very beginning of my journeys, as it drove me crazy trying to figure out how finished pieces achieved this look!! I didn't even think to set the temperature down on my soldering iron! A couple questions: For edge bead soldering like this, does gel flux work better than liquid flux? I find myself reapplying liquid flux sometimes as it seems like it evaporated, or dried up as I'm moving along. Also, I have a whole spool of solder that looks like it has oxidized or whatever as it's been sitting my my garage and this summer has been a HOT one. Is it still fine to use? Do I need to do anything to it to make it usable, or do I just need to purchase another spool and do a better job of storing my soldering supplies? Thanks so much! Honestly you are one of the best stained glass artists I have come across so far on youtube. If you created classes, I would 100% completely sign up!!
Thank you so much for your kind words! As far as flux, it doesn't matter. If you use gel, you can pretty much flux the whole edge and go, but if you use liquid flux, I'd flux a little section at a time, as it does dry faster than gel or paste. You can still use oxidized solder (I had some pretty old stuff from my grandpa that was somewhat oxidized). Try it out, if it gives you issue, you can unspool the solder in sections and steel wool it a little to make it useable again)
You are amazing and a very good teacher. Thank you.
You are so welcome - I'm glad to be helpful!
Thank you I never could figure out how to do that !
Very good, This is the part I struggle with. Plus when I see Stained glass pieces for sale ,, I notice the soldering, most of the time, it’s messy. Yours is gorgeous
Thank you!
90 percent sure that was black magic, thank you so much for making the video. two quick questions.
when you decided that you needed more flux what signs indicated that you needed flux?
when i try to build up my bead it will spill over the sides how does yours not spill over? I do have my iron at 360°c
Haha you're welcome! When I'm tapping the solder, if it starts getting lumpy/forming peaks, that means I need more flux, cause the flux allows the solder to flow and stay smooth. Make sure you tin the front and back edges first, I feel like that gives the solder a base to grab onto so that it doesn't just fall off (I don't know if that makes sense, lol). Make sure you're not lingering with your iron too long, that's the only reason I can think of why the store would fall.
Thank you! This is very helpful. What type of glove are you wearing?
It's actually a heat resistant glove for hair styling tools
Thank you for showing us this. I'm just curious... why would we do that instead of using hobby came?
It's mostly just a personal preference, and depends on the project. I usually prefer the look of beading the edges of my smaller pieces (specially on my flowers, just cause it looks more organic), but I'll use came on larger pieces. One reason to bead the edges instead of using hobby came though is if you're wanting to apply a copper patina, since the patina doesn't work on lead.
Oh, thank you so much for that video! It really does look easier when you do it 😅 What size is your tip actually? Much love from Germany, x Mary
I use a 3.2 mm tip 👍🏻
@@SamanthaAshleyGlass Ahh, thank you for answering 🥰 Have you ever tried a bigger one? What makes the smaller tip work better for you?
@@RockAndRoadkill I use the smaller tip when I'm soldering smaller suncatchers with lots of small pieces, and I'll use a 5mm tip for larger pieces. It's just a preference 🤷🏼♀️
great video, and great technique. What temp do you use for tinning?
Thanks! I just tin quickly at 410°
Thank you so much for this video! I am just starting out in this craft and am really grateful for your clear and thorough instructions. I was just wondering, what glass did you use for this project?
I'm glad to be helpful! I used bullseye's cranberry pink white streaky
Thank you so much! Beautiful! @@SamanthaAshleyGlass
good rose nice！！😀I support you from Japan
Thanks!
Nicely done, thanks.
I've just recently come across your videos and they're very helpful, thank you! I too think your soldering is excellent, and I've noticed that you never seem to have black "bits" appearing in your solder lines; would know by any chance why this might be happening to me? Perhaps I'm using too much flux? Thank you again!
Hi! Thank you! The black bits are from flux - are you using liquid flux (I feel like the black bits happen more with liquid flux?) Try using less flux, or a liquid or paste flux, and just keep wiping off your iron tip multiple times while you're soldering.
Ok, good to have that confirmed--I'll try to put less on and see if that helps :) Thank you again! @@SamanthaAshleyGlass
Hi Samantha, as I am a beginner, I am wondering if you used any came in this sun catcher, or just copper foil and solder?
@@dianenortness2131 hi! This piece is all copper foil and solder.
I loved watching this video, I've never done this but can't wait to try. It's so beautiful! Just wondering if you can use a heatgun afterwards and do an allover heat blast to smooth all the lines and make them more continuous?
I have no idea, but I imagine the concentrated heat from a heat gun would risk cracking the glass
Great video. I’m a beginner and tried to do some edge beading. It went ok-ish, I need to keep practicing.
Whenever I came to one of my seams, the edge beading affected the look of my piece’s beading on the front and back. I’m having trouble making it look nice where solder lines meet. Do you have any tips for where the edge beading meets the piece’s solder lines? Or any tips in general about making solder lines connect smoothly?
@@EmilyPahl-j7y I know exactly what you're talking about. After I'm done edge beading, I put my iron temp back to 410° and lay my piece flat, then any joint that got messed up just gets a little flux, and then I grab a little solder and hold it on the spot for a sec to fix it.
@@SamanthaAshleyGlass thank you so much. I will keep practicing. :)
what determines the soldering tip that you use? Also, what is your temperature set on? thank you
I suppose personal preference. I like using a 3mm tip for most of my projects that have smaller pieces. I'll use a 5mm tip on larger panels, or if I'm using 1/4" foil for thick solder lines.
360°c for edge beading, and 410° for everything else
Soooo helpful!! Thanks :)
Great tutorial, however your steady hands make this look easy! No limit for you with that talent!
great job!
just like my masters in art college. :-)
Thanks for this video !
Hi... gratis video! How you put de holders? It s a hell for me...😅
What are the gloves that you are using with the pink dots? I've been in search of some that would work well. The 2 that I've tried were not very good.
Hi! I just need to know what are the things to need to buy for beginner. Thank you.
Hi! So here's a link of everything that I actually use in my studio (it's a big list, the more you work with this medium, the more tools and supplies you accumulate). (www.amazon.com/shop/samanthaashleyglass ). The brands and types of supplies you get depends on the budget that you're working with, I would say though, that the bare minimum of what you need for a beginner is a small grinder (doesn't have to be anything large or fancy), a cutter, running pliers, 7/32" foil, flux, soldering iron, 60/40 solder (or lead-free if you prefer, though it's more difficult to work with), flux remover (or dawn dish soap), wax, and safety gear like goggles, gloves, etc.
You can look at a number of stained glass websites like Delphi, and Anything in Stained Glass, as they have beginner kits you can purchase.
Excellent!
I noticed you turned down the temperature to solder the edges, but why? I’m still a beginner and I want to understand the why’s, not only the how’s. Great video and presentation. Thank you so much!
@@ellengreenlund3905 I turn the temp down so that the solder doesn't get as hot, and it cools quicker. If the solder stays too hot too long when edge beading, you'll have more instances of the solder falling off the edge, unless you go super super slowly and carefully. When I turn the temp down, I can edge bead a little bit quicker (still takes time though)
@@SamanthaAshleyGlass thank you. I’ll try that on the first piece I’m finishing. It’s a butterfly with lots of curves. Why do I pick such a hard pattern, LOL. Next time it’s mostly straight edges for me!😊
Great tutorial! What solder did you use?
Thanks! I used Amerway 60/40
@@SamanthaAshleyGlass I can’t wait to try this technique. I’ve been struggling with my edges.
Thanks for the quick response.
@@lisag2771 I hope this way works for you! 🙂
Do you use 60/40 solder to edge bead? Thank you.
Yes I do
Hi there, what solder wire do you use? Thank you :)
I use 60/40, I mostly use Amerway or Canfield
How do you get such a nice black patina shiny coating?
I have a black patina tutorial on my page, if you want to check it out. It is slightly different than the way I did this one (I'll make a video for the super shiny patina too). The key was scrubbing the solder seams with magic eraser and Dawn before applying patina, and skipping steel wool.
Thank you! I will check it out.
Thank you so much...this is very helpful
You're welcome! I'm glad you found it helpful 🤗
@@SamanthaAshleyGlass temperature is everything
Hola , muy interesante tu video, que soldador usas por favor?
I use the hakko fx601-02
I’m sure this is a stupid question. What stops it from dripping onto the glass? And if it does how do you remove. Thanks!
That's a valid question! I'll try to explain it the best I can. Since the solder only sticks to the foil and not the glass, the foil acts as a barrier. So when you tap solder on the side, it sort of spills over onto the front and back of the glass, and starts to solidify as it reaches the edge of the foil barrier. That's why you have to go quick though, if you hold your iron on the edge too long, it'll keep the solder liquid, and then gravity will cause the solder to fall off the edge.
In most cases, when solder falls off the edge, it doesn't "bond" with the solder lines that it hits - you can usually just flick it off with your finger or some tool. If it doesn't come off, you'll just have to go over that spot with your iron.
@@SamanthaAshleyGlass Thanks so much! I've not attempted this craft and want so much to try!!
Great video instruction! You have a talent for this creative work! My like and subscribe to you! Keep making beauty! You are doing great! I wish you creative inspiration! Best regards Mr.Hi! :)
Thank you!
What brand solder do you use? Please and thank you.
So for this piece I actually used some really old solder I had lying around from "federated-fry metals." I normally use Amerway or Canfield.
@@SamanthaAshleyGlass thank you.
When you “grab” the solder from the roll, how do u keep it from falling off the iron on the way to the piece? Mine falls off the iron all the time!!!!
I make sure to clean the tip (by rubbing it on the sal ammoniac bar) before I grab the blob. I repeat that after a couple blobs.
@@SamanthaAshleyGlass thank you! Your workmanship is outstanding!!
Completely new here. When you show the example of the 'just tinned' section.. What do you mean by this? Because to me it looks like you are doing the same thing (but obviously with a different result. Flat not rounded). What is the difference?
@@JordanWade-hj5ns just tinning means you're using a lot less solder, and basically doing a quick pass just to coat the copper foil with some solder, you're not actually building up the bead. If you leave it tinned, you have a weak (and unfinished looking) edge.
@@SamanthaAshleyGlass thanks a lot for the answer!
What is the metal ratio of your solder (amount of lead, etc)?
Do you have any videos of edge beading after wire wrapping?
@@CSimi115 not really, I have this Instagram video from a few years ago, but that's it.
instagram.com/reel/CWwkKVYAvTm/?igsh=cGVpNmJoMHNoeWxh
I've been using the same technique and temp for all of my edge beading, but I'm still having issues. My solder runs even if I'm beading a flat level line. It'll flaten out to the sides and often run off the front or back. Does type of flux make a difference? Mine is liquid, not gel. Its the only difference i can think of besides just needing more practice.
Are you by chance using a standard iron tip, which is usually pretty large, like 1/4"? Edge beading can be more difficult with a larger tip (larger surface area, more heat, more solder, so greater chance of solder falling off the edge). If that's the case, you might need to try using less solder, or turn your iron even lower. I mostly solder with a 3.2mm tip.
@@SamanthaAshleyGlass omg yes! I had no idea. I'm going to buy a different tip and hopefully that helps. Thank you!
can you link the solder you used along with the gloves?
These are the gloves: amzn.to/3PvGzh8
The solder is Amerway 60/40
www.swartglass.com/Amerway-6040-Solder--Bulk-PricingbrBuy-5--1595brBuy-25--1450_p_10118.html
Thank you SO MUCH
Can someone please guide me as to what material or metal product is used to make diy frames of glass painting or sun catchers at home?
Do you have a video on making the rose?
I do! Here's the tutorial, and the pattern is available on Etsy: th-cam.com/video/xPzxOiG73eI/w-d-xo.htmlsi=BbjgTknzi2EE83YK
Hi, what kind/brand of flux gell do you use? Thank you
@@dirkschilstra4942 hi! I switch between classic 100 gel flux and Amerway's tigers eye gel flux - they both work great!
@@SamanthaAshleyGlass thank for the info!
Nice so that's how done
How did you turn that solder black on the final piece?
With black patina
Mine ever looks that good.
It is dripping off the sides, even when I tap it really short. Do you know how I can fix this? Thank you!
What temp are you using, and what flux? I use a lower temp for edges (360). Make sure your edge is pretty level, cause even if it's tilted towards you or away from you, that can be enough for gravity to "spill" the solder over the edge.
Is it 60/40 or 50/50 you're using?
60/40
I've tried this and the solder will drip over the edges. Any tips?
There are a few things that could be happening. You might be tilting your piece towards you, thus allowing gravity to spill the solder over. Or you might be lingering too long, and too much heat is going to one spot. You want to bead slowly in a tapping motion, then let the solder cool for a few seconds. I also find it easier to edge bead with a smaller tip (I like to use a 3mm tip)
Who used to soldier voltage
Do you know why I can't grab a glob of solder? It just slides off. My tip is clean and freshly tinned.
Also, when I pick up my iron, the solder doesn't pool, it leaves a hershy kiss point on it.
The Hershey kiss point is usually an issue of not enough flux. As far as why you can't grab a glob of solder, if your tip is tinned, you should be able to grab the solder, unless you're grabbing too much and gravity just isn't having it.
@@SamanthaAshleyGlass thanks for the quick reply! Is it possible my iron isn't hot enough?
I've got fresh Flux on there but it's still leaving points when I lift
@@KayossPlays you could try bumping up your iron to 410
@@SamanthaAshleyGlass that's what it is! I only have 1-10, not Temps so it's hard to know if you're not experienced I guess.
Your video was super helpful thank you!
Now it's dripping all over the place 😫 idk if this is the craft for me lol
I feel like I'm so close!
Please tell me soldring wire 60*40
Yes, I'm using 60/40
Thnx I like it u and ur work
Please help me I need solding wire and Flux .. please send me solding wire and Flux I am live in Pakistan
Arte con vidrio