Camshaft & CVVT Removal & Replacement - Nu Engine - KIA & Hyundai 4 Cylinder Engines With Dual CVVT
ฝัง
- เผยแพร่เมื่อ 23 ส.ค. 2024
- This video is the ultimate guide to removing and replacing the intake and exhaust camshaft on KIA and Hyundai NU engines. Also, it shows how to replace without the full chain removal.
![ง้อ (ALRIGHT) - FOURTH Prod. by URBOYTJ [ OFFICIAL MV ]](http://i.ytimg.com/vi/Qs8ZeV6Dqj8/mqdefault.jpg)
Check out this too:
How to Test & Fix P0016 Crankshaft - Camshaft Position Correlation Bank 1 Sensor A (Bank 1 - Intake)
th-cam.com/video/rucqKKmx1iw/w-d-xo.html
Excellent tutorial, I'm too old to do this kind of work on my car now but I've enjoyed your work
Like & subscribed
👍👍👍👍👍👍👍👍👍👍
Thanks my friend. I’m glad you liked it.
I've just opened my timing case, removed sump, did the chain, tensioner guides and all, spent over 1000 dollars on needing help from a mechanic, now my car has metal shavings and its worst than before, the car whines loud, shakes and hesitates and after any rev past like around 2k rpm, it makes a funky noise.
I'm so upset, spent money I didn't have to get this done, and now I see you did the timing that easily, I feel like crying, amazing work on your part but I have no understanding of how to do it that way,
I think the cam gear is fucked and I have no idea how to do it your way, if I did I'd be at it, is there any other video that explains how to do it in better detail? Thanks !
Hi there, I'm sorry for what happened to your car and I am really hopping that the following video helps you adjust the timing properly if your car is any model of Hyundai or KIA:
th-cam.com/video/Z9Ksq-Nebww/w-d-xo.html
I’ve done this procedure many times. Easy money when it’s customer pay.
Can you replace just the phaser or do you have to buy camshaft and phaser together?
You gotta replace both at the same time because the pin breaks off
Who else is here because they are cam swapping their Kia/Hyundai?
Trying to get my soul to 250 all motor and finally after 10 years of ownership found a way to finally do it 😂😂😂
Well done, very useful
👍
Would this help a fault code P0011? Intake vvt? But I looked at the valve and it looks fine. Ohms came back at 12. When I read the specs should be 6-8 ohms. I’m just tryna fix this as soon as possible
Hi there, please check the channel page, there are two videos specifically for P0011.
Thank you for posting
Thanks
Pretty well Explained thanks for sharing!!
Thanks
Thanks for the video
👍
Please when working on the camshaft and i turn the engine and i get the down mark and the top one is jump by one please should i still mark on the chain or what will be the procedure, because they have worked on the timing system before
Hi my friend, Yes, when you are adjusting the timing you must make sure the top marks are aligned. A very small misalignment can cause a big problem on the engine.
❤❤❤thanks
👍👍👍👍
What are the symptoms to have the vvt gear changed?
Engine hesitation normally when gets warm, VVT sound when engine cold, P0011 to P0024 fault code, it can cause misfire and poor power as well.
This is outdated. You have one for 2015 hyundai sonata?
Please the pry bar how many inches is the length
Hi there, you mean the stopper Pin or breaker bar?
Can you tell me why my elantra a shuts off when it goes over 1500 rpm and it happen everytime vvt exhaust is connected otherwise everything is fine
Hi there, there seems to be a faulty VVT solenoid. Sometimes when VVT solenoid if faulty, it rotates the VVT to the maximum position ( in exhaust side to max advance), so when engine is warmed up, maximum advance is just too much for the engine and specially in 4 cylinder engines (like yours), engine can not take that condition and it will go off.
@@AutomotiveDiagnosis my bad I forgot to tell you its Brand new oem and it keep doin the same do u think i got a defective one or is it a camshaft play or what else there is no dtc either
@@electricsanti4518did u solve the issue? currently i need to replace a camshaft sensor, im waiting for delivery
@@acrocheezefpv no i didnt, what is your issue
@@electricsanti4518 well my issue was my car kept stalling. I recently switched to 5w 30 and car was running fine with it. But on Wednesday i added in the oil a engine cleaner which was thick. At first i didnt know that was the issue after i spent $200 to replace a bad battery which was my first assumption of my car stalling, still it stalled. Then i bought a coil for $100 and a spark plug, car still stalled. After much research i figured it was a camshaft postion sensor. I ordered that which should be in today. However, when i woke up this morning, i started thinking that the engine cleaner i put it was too thick combined with the 5w30, which was making my engine overheat and overworking. So since the oil was more think, it couldnt move fluently within the engine and other parts to keep the engine running. So i bought some new 5w20 oil and a filter. After draining then refilling, car sounded a whole lot better and i drove for multiple hours at low speeds and highspeeds to try and trigger a stall and nothing happened. So my issue was the engine cleaner. Anxiety??? idk what that is lol 😆
Hoe long does it take Todo a job like this?
about 5-8hrs
@@lewisvenable9904Why does it take that long? Are you stopping to work on other cars, or that time strictly on fixing this issue!
@@jammijam_ Im no mechanic but hyundais servive states it takes 7hrs. idk if thats 7 hrs to dissasemble then reassemble.
Personally, iv replaced the timing chain on my car and it took 5 days since i have a full time job. So, little time when i come home to work on it when i have other responsibilities.
@@lewisvenable9904Hyundai pays 3.6 hours for this
I breaks my heart and wallet to know that I will never fix this problem I have now... 😭💔
So what happened?
Same here I just got my car back from the dealer and I need this done , Hyundai is trash I will never buy another one as long as I live , my car only Has 80k on it and it's a 2017 SMH
You're blaming the car, but it's you g
Im doing this myself in 2 weeks. dont be a punk. I have no mechanical experience, just a diy guy. It helps when you buy your car used, you can afford to break shxt and not feel the pinch as much.
5 minute job.