Easy Identify leads on a 4 wire stepper motor with Multimeter
ฝัง
- เผยแพร่เมื่อ 16 พ.ย. 2017
- Easy Identify leads on a 4 wire stepper motor with Multimeter
Stepper motors comes with different winding configurations. I bought second hand a 4 wire stepper, without the wiring labels
This video shows how to identify four-wire stepper motor coil pairs with a multimeter
Arduino Tutorial ::::::::::: SUPPORT CHANNEL ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Please Donate To Help Me Afford New Equipment And Software To Make My Videos More : goo.gl/1m8Dg2
Don't forget to subscribe! - วิทยาศาสตร์และเทคโนโลยี
![[ไฮไลต์] ฟุตบอลชาย ญี่ปุ่น vs ปารากวัย รอบแบ่งกลุ่ม | โอลิมปิก 2024](http://i.ytimg.com/vi/X_BeGaAv1oM/mqdefault.jpg)
I used this method and learned two things. Continuity testers beep. (Did not realize that.). And my coil was wired with 1 and 3 as a pair and 2 and 4 as a pair. Did not expect that. Thanks for the video!
The brief was accomplished
For anyone unsure what A and B refers to, I posted this elsewhere but wanted to make sure this info was available to everyone. A and B refer to the coil or phase, + and - or 1 and 2 refer to the polarity (A+ = A1, A- = B1, B+ = A2, B- = B2). Polarity generally determines if it moves forward or reverse when a signal is sent (but that can easily be swapped in software). So that makes A1 and B1 a pair, A2 and B2 being the other pair. Hope this clears things up a bit.
Thank you for the video.
I have one stepper motor that all six conectors are beeping. What that means?
Once the pairs have been determined, does the order matter beyond that? As in, some data sheets use the configuration 1A, 2A, 1B, and 2B to indicate coils, but not whether it matters which direction the current is travelling in.
@@black5heepX I think you can use the voltage on multimeter to figure that out
Did you ever got the answer?
In the stepper motor listing in your diagram is there supposed to continuity between 2B and 2A or is it supposed to be 2B and 1B? Right now my setup just keeps moving the cutting stepper motors 3 times in the same direction for the same length even if I have 0 setup for the distance. The other wire extruder seems to be working.
Excusme mam, i want to asking about stepper motor, i have make some project that is 3 motot stepper and rfid reader, i have a problem with rfid reader cannot read the card because if i connected the the motor cable to driver and turn on 12vdc supply driver its not working, and if i unconnected the cable motor with power 12vdc still on the reader can read the card, can you help me to fix this problem mam, thankyou very much
motor bkm2 enalazer card k shath kise chla ge without bd 448 k manual
what will be the rotation angle of this stepper motor?
Soon, please wait. I will make a video clip
What is different between A+, A- & B+,B-
yes kindly someone answer
ppleaaaaaaaaaaaaaaaaaaaaaaaaaase
A and B refer to the coil or phase, + and - or 1 and 2 refer to the polarity (A+ = A1, A- = B1, B+ = A2, B- = B2). Polarity generally determines if it moves forward or reverse when a signal is sent (but that can easily be swapped in software). So that makes A1 and B1 a pair, A2 and B2 being the other pair. Hope this clears things up a bit.
That's ok but which pair is A and which is b let me know please !
@@sandeeprajmane That varies somewhat on the brand of stepper (normally you should have received a diagram with your stepper with this info), but I've found in most cases it goes pin 1 is A+, pin 2 is 'centertap', pin 3 is A-, pin 4 is B+, pin 5 is 'centertap' and pin 6 is B-. You can ignore the centertap pins in almost all cases. The easiest way to verify what pin is which is via a multimeter per the video. I tried posting a guide to help but youtube is deleting any comment I make with links sorry.
Six wire stepper motor
NO CODE LINK|||||||||||||||||||||||?????????????????????