Thank you very much for the video, it helped me a lot after I had an accident and when I fell it ended up disconfiguring and no one knew how to fix it. Hugs here from São Paulo - Brazil
Hello,is there a way to do factory reset,becouse I got E10 error and I dont know the values for PO7,11,14,15,17(36V/250W,9Ah).Thanks,wish happy new year!
Thanks for vid. I have the 350 w version and had a motor failure. After replacing it I have since had no speed reading. If I set PO7 to anything other than 1 I get a reading (not accurate) but a 1 the screen just says 00.00. At other settings I get a reading buy speed only registers when I am peddling and falls off to zero when coasting. A replacement screen performs identically. I notice tat PO7 should not be changed but is there any help you can offer? Bike performs well in all other respects.
Hi. Videos always brilliant. Have Lo26 with 350w motor. On S380 parameter PO9 'Magnet steel number for Speed Test Range 1-100', what does this actually mean? And what is the setting for this motor please? Thank you.
Hi. I've just bought one of these to replace one that was stolen so I can't help but compare them. I'm finding the throttle adds absolutely nothing to the pedal assist. On my old bike I could pootle along on PAS1 then hit the throttle if I came to a hill and I could really feel the boost. On the new one I have to increase the PAS to get any more help. I suspect that this might be because it is set at zero start. I have tried to set it to non zero but the setting just won't change. I've been able to change P01, P02, P08 AND P16 but the rest just stay the same. Am I doing something wrong or do I have a faulty unit? Any help would be much appreciated.
Thanks for rapid response. I posted on another video because I didn't know how often you checked these and I thought maybe other users might be able to help. So just ignore my other comment.
![POLYCAT - ข้อความรูปยิ้ม :) [Music Video]](http://i.ytimg.com/vi/lBhIgPGCgbI/mqdefault.jpg)
Thank you very much for the video, it helped me a lot after I had an accident and when I fell it ended up disconfiguring and no one knew how to fix it. Hugs here from São Paulo - Brazil
Thank you 🙏
Thanks very much. Very helpfull Instruktion for my nee lo 26.I miss them in the operation manual.
thank you so much man you really helped me out I thought I broke my samebike
Nice 👍
Samebike P-settings
P00 ununsed
P01 back light
P02 mph/kph
P03 voltage
P04 display auto-sleep
P05 assist level (at startup?)
P06 wheel diameter in inches
P07 (don't change) speed sensor signal
P08 speed limit
P09 0=start, 1=motor won't start until 6kph
P10 0=no throttle, 1=only throttle, 2=both
P11 pedal assist sensitivity, 1=least, 24=most
P12 pedal assist start intensity, 1=low, 5=high
P13 pedal assist magnet numbers
P14 max peak amperes, reduce for lower power, do not increase
P15 (don't change) lower voltage cutoff
P16 000 odometer reset, hold up+down for 6s
P17 (don't change)
P18 speedometer fine tuning
P19 (don't change)
What if you accidentally change where is says do not change
My controller won't go farther than P02 please help!
Hi. Great video. Any do you know where I can find settings for MY SM26?
Hello,is there a way to do factory reset,becouse I got E10 error and I dont know the values for PO7,11,14,15,17(36V/250W,9Ah).Thanks,wish happy new year!
Thanks for vid. I have the 350 w version and had a motor failure. After replacing it I have since had no speed reading. If I set PO7 to anything other than 1 I get a reading (not accurate) but a 1 the screen just says 00.00.
At other settings I get a reading buy speed only registers when I am peddling and falls off to zero when coasting. A replacement screen performs identically.
I notice tat PO7 should not be changed but is there any help you can offer?
Bike performs well in all other respects.
How to fix usb is not charging my phone. Thanks
Hi. Videos always brilliant. Have Lo26 with 350w motor. On S380 parameter PO9 'Magnet steel number for Speed Test Range 1-100', what does this actually mean? And what is the setting for this motor please? Thank you.
Hi. I've just bought one of these to replace one that was stolen so I can't help but compare them. I'm finding the throttle adds absolutely nothing to the pedal assist. On my old bike I could pootle along on PAS1 then hit the throttle if I came to a hill and I could really feel the boost. On the new one I have to increase the PAS to get any more help. I suspect that this might be because it is set at zero start. I have tried to set it to non zero but the setting just won't change. I've been able to change P01, P02, P08 AND P16 but the rest just stay the same. Am I doing something wrong or do I have a faulty unit? Any help would be much appreciated.
Restore the display
How???
Thanks for rapid response. I posted on another video because I didn't know how often you checked these and I thought maybe other users might be able to help. So just ignore my other comment.
@@fionashepherd6587 check out a video I did on all settings
@@fionashepherd6587 no worries ur welcome hope it helps
Hi, can anybody help I have a E09 code which is a controller eror, how do I fix this
thats a motor problem look at the back wheel a wire mite of come off
Hi. Have Lo26 with s830 display. Speed and trip only work when using PAS. Any advice Please?
Graham Pennack I have a video on all settings put the settings to the same as u see will fix it
@@bubblesway Thank you very much will look.
Where dishonest those,I I am trying to get some for my daymak max large 36 volt 250 watt motor ,but the company will not give them to me
How do you no what voltage your battery is
Use a volt meter
Hi bubblesway. Any idea what p15 is?
I made a video on all error codes check it out it will help
Hey man, my front headlight broke? Is there anything I can do about it or get sent a replacement? Thanks dude, love the video.
U could use any light really any light that has a black and red wire or even any light that has two wires
@@bubblesway i see. Do you know if there is the exact same one I can buy mate or something similar? Cheers man
@@louiesingh4444 I’m sure u could yes me my self I just use usb lights £10 on eBay
Samebike P-settings
P00 ununsed
P01 back light
P02 mph/kph
P03 voltage
P04 display auto-sleep
P05 assist level (at startup?)
P06 wheel diameter in inches
P07 (don't change) speed sensor signal
P08 speed limit
P09 0=start, 1=motor won't start until 6kph
P10 0=no throttle, 1=only throttle, 2=both
P11 pedal assist sensitivity, 1=least, 24=most
P12 pedal assist start intensity, 1=low, 5=high
P13 pedal assist magnet numbers
P14 max peak amperes, reduce for lower power, do not increase
P15 (don't change) lower voltage cutoff
P16 000 odometer reset, hold up+down for 6s
P17 (don't change)
P18 speedometer fine tuning
P19 (don't change)