How to use electric bike ⚡️ menu KT-LCD7 | As found on EBFEC e-bikes ⚡️🚲

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 ก.พ. 2022
  • For UK/European markets.
    Electric bikes from the EBFEC range are fitted with the KT-LCD7 display. The instructions that are supplied are generic covering all markets, not all settings in the manual are available (i.e. there is no throttle for European bikes).
    This video goes through the operational settings as well as how to reset the ride statistics, how to change the display units from km/h to mph and how to change the max assist speed from the default 25km/h.
    To reset: turn on, wait 5 seconds, press Up and Down buttons until units flash, press Menu button to reset
    To access Settings: turn on, press Up and Down buttons until units flash. You can now change max assist speed, wheel size, and km/h to mph.
    Comment for estarli bike:
    Horizon Micromobility i found out how to do this on a estarli bike. For anyone else who is trying this follow this guide : Power on your bike Immediately hold down the "up" & "down" arrows until the screen backlight turns on. Release all buttons and then press the following buttons in this order to enter the setup menu "Power" - "up" - "down" Followed by "Up" - "power" - "down" this will enter the setup menu to adjust max speed
    Music from Uppbeat (free for Creators!):
    uppbeat.io/t/paul-yudin/at-th...
    License code: 00HEKEIIYASHHCKG
  • ยานยนต์และพาหนะ

ความคิดเห็น • 27

  • @elementary8963
    @elementary8963 2 ปีที่แล้ว +1

    Great video - thanks. Does the cruise control work on your UK/EU display?

    • @elementary8963
      @elementary8963 2 ปีที่แล้ว +1

      After the cruise function is turned on, the trip riding speed is greater
      than 7 KM/ H, hold "DOWN" button long and enter cruise, the CRUISE lit. Brake
      or hold any button to cancel.

  • @user-tx1yl9xw3l
    @user-tx1yl9xw3l หลายเดือนก่อน

    How do you change the time?

  • @jordanreale
    @jordanreale ปีที่แล้ว +2

    P1 P2 P3 4 5 please

  • @craigjones123
    @craigjones123 2 ปีที่แล้ว +1

    I am trying to access the settings menu on the unit but it does not seem to be doing anything, is there something I am doing wrong ?

    • @HorizonMicromobility
      @HorizonMicromobility  2 ปีที่แล้ว +1

      You need to turn it on and then press the buttons within 5 seconds - you then need to keep fingers pressed for around 20-25 seconds.

    • @craigjones123
      @craigjones123 2 ปีที่แล้ว +1

      Thanks for the quick reply. I have done exactly that but it doesn’t work. A little frustrated right now.

    • @HorizonMicromobility
      @HorizonMicromobility  2 ปีที่แล้ว +1

      @@craigjones123 What buttons are you pressing?

    • @craigjones123
      @craigjones123 2 ปีที่แล้ว +1

      @@HorizonMicromobility turning the unit on and then immediately holding down plus and minus for over 30 seconds. i have and Estarli e20

    • @HorizonMicromobility
      @HorizonMicromobility  2 ปีที่แล้ว +1

      @@craigjones123 Hmm try contacting Estarli - would have thought it would be the same for all bikes that have that controller!

  • @naranja314159265359
    @naranja314159265359 2 ปีที่แล้ว +1

    Does anyone know how to de restrict an ebfec please?

    • @ianmangham4570
      @ianmangham4570 ปีที่แล้ว +1

      Yes

    • @patrykwawrzyniak1872
      @patrykwawrzyniak1872 10 หลายเดือนก่อน

      So how to do it?

    • @peterfrancis7195
      @peterfrancis7195 6 หลายเดือนก่อน

      @@ianmangham4570 how do u do it my freind did you make it faster

    • @peterfrancis7195
      @peterfrancis7195 6 หลายเดือนก่อน

      How please i need faster bike

    • @ianmangham4570
      @ianmangham4570 6 หลายเดือนก่อน

      @@peterfrancis7195 You pull the white wire from the esc on most