Perhaps, just a newbie question. I have a dom 450 with a beastx plus. All Blades are balanced, tail set up in rate mode MKS DS93 servo, but I can't get my tail to hold as good as in this video in HH mode. Always has a blowout on hard pitch pumps (11 degrees pitch) that happens erratically. The video perhaps hides the behavior of the trex tail, but I'm not sure. Any suggestions? Maybe a little blowout is normal? I have three bearing in the tail tube and tried several torque tubes to get vibes low. I had higher exceptions for this heli.
You need to tune your tail gain settings in your tx. Also its best to have seperate tail gain settings for each flight mode as torque loading varies between them. Also check dial 3 on your beast. Should at 12oclock.
I just fly my heli around nice and easy and fly my jets around nice and easy I guess now a days nobody can’t fly anything simple anymore
He has a good sence of angular positioning
Alan Nice Flying the Trex 450L Dominator With GPRO ! Thanks for the Video !
Insane little thing 😅
If only I could do that with mine 😂
It took you over 3 min to get back control over this helicopter hahahaha great flying man looks amazing
Put this guy in NASA! His brain is defying physics 🫡 👀
ALAN=Un MONSTRE!
Oh my goodness gracious that's badass
Hola, muy buen video y vuelo. Una pregunta, es importante la marca y modelo del flybarless? o solo se necesita habilidades para pilotar?
You should post your GPRO tuning sometime, I have the exact same setup so I'd be curious to see.
Amazing 450 flight!!!!!!
YOU ARE KING
Excelente, todo es perfecto. felicitaciones!
that's just insane! Wow!
Me trying to do a pyro flip and crashing . . .
this guy . . .
great funnels and speed circles
Perhaps, just a newbie question. I have a dom 450 with a beastx plus. All Blades are balanced, tail set up in rate mode MKS DS93 servo, but I can't get my tail to hold as good as in this video in HH mode. Always has a blowout on hard pitch pumps (11 degrees pitch) that happens erratically. The video perhaps hides the behavior of the trex tail, but I'm not sure. Any suggestions? Maybe a little blowout is normal? I have three bearing in the tail tube and tried several torque tubes to get vibes low. I had higher exceptions for this heli.
You need to tune your tail gain settings in your tx. Also its best to have seperate tail gain settings for each flight mode as torque loading varies between them. Also check dial 3 on your beast. Should at 12oclock.
Brutal violence but in a fantastic and beautiful way.
!!!!!!!!!!!!!!!! охиренно!!!!!!!!!!!!!!!!!!
Is this easy to you? Do you feel like your constantly going to crash?
What head speed was that bud just asking
Thats nuts
What I have to smoke to fly like this?
What are your settings on your spextrum
good job!!
Thats so much Tareq al saadi take off
it's smart though,doing piroutes close to the ground will show quickly if your gyro is properly working, i do it at every takeoff aswell.
When you start your chopper up do you say to your camera man
LETS SHRED SOME AIR
Looks totally chaotic!
Nice ;)
greatings Mic
U must try sab goblin broo 😉
Look how small your helicopter is
How much rpm fly you on this Heli??
Ost601 He doesn't answer comments Ost601
Ost601 the stock 450L is usually between 3000 and 3500rpm ungoverned
KpilotRCHelis nice, thank you Kpilot. Phone tach app will also work to get close to what hes using too.
Schaut wie die fruchtfliege bei mir zuhause aus :)
J aimerais bien savoir le maths mie dans l helico pour faire ça..celui vendue d origine est moin performant
Wow!
I like this heli a lot can you send me one? (I'm poor)
show perfect..!
Well that lipo is dead lol