The length of the barrel must match your cylinder. Depending on the percentage of a cylinder depends upon the length of your barrel. The lower percentage of the cylinder the short of the barrel. The higher the percentage of the cylinder the longer the barrel And that’s before you need to take into consideration your gears motor and everything else
I've bought an upgrade pack for my gen8 today, waiting for it to arrive. When you spin the end of the barrel in the glue do you have to wipe any off of the inside so that it doesn't decrease the ID of the barrel or is that not really an issue? Thanks for the good videos mate.
Thanks for the question. We Didn’t get any glue on the inside of the barrel. Just be careful when applying and you can look through the other side to make sure that it’s all clear. 🤩🤩👍🏽
![ALLY - OH MY! [ REACTION ] 'Amarin Nitibhon' #ALLY_OHMY #ALLY #allynitibhon #แอลลี่](http://i.ytimg.com/vi/nX9qpHjVfbQ/mqdefault.jpg)
thank you TTB for that helpful video :)
I glue them the other way. I use the grooves with O rings in them as a barrel stabilizer
Random question, does a longer barrel improve accuracy at all, is is it just for fps?
The length of the barrel must match your cylinder. Depending on the percentage of a cylinder depends upon the length of your barrel. The lower
percentage of the cylinder the short of the barrel. The higher the percentage of the cylinder the longer the barrel And that’s before you need to take into consideration your gears motor and everything else
I've bought an upgrade pack for my gen8 today, waiting for it to arrive. When you spin the end of the barrel in the glue do you have to wipe any off of the inside so that it doesn't decrease the ID of the barrel or is that not really an issue?
Thanks for the good videos mate.
Thanks for the question. We Didn’t get any glue on the inside of the barrel. Just be careful when applying and you can look through the other side to make sure that it’s all clear. 🤩🤩👍🏽
how do you remove the stock barrel of the Kriss vector v2 from the T piece? mine seems to be really stuck tight
Benjamin Lim Good question. you can either drill out the barrel or buy a new T piece. I would just buy a new one. 😁👍👍
How do i remove the t piece from the old plastic inner barrel? Pls reply
FrostyMcFlurry YT Best to just go and buy a new one
@@TTBSCOOBY thanks
@@TTBSCOOBY what's the pros and cons with using an aluminium barrel?
FrostyMcFlurry YT all pros no cons
How is the AWM
KTM lover Waiting on parts coming from China probably gonna be awhile 😔
Is it because of the virus because of Factory Wait
Can I use a hot glue gun and get away with that?