Nice signs Lance, no 2 is the go. $120 for 8 x 4 sheet seems very reasonable, initially I thought that was for a A4 size piece. Nice stew, thanks, enjoy your week.
Great stew Lance. Good to see that the planning for the rally has already started. It is always good to have a look around the shed and surrounds in the videos. $ 35 per night for facilities such as you describe seems reasonable to me but we are always looking for something a little cheaper. Good luck.
Great Stew Lance, great views from the shed! Good job with the signs, very tidy job! The MF20 bonnet and grill is coming along very nicely, will you replace the decals or not?
G Day Lance another great stew, you wouldn't believe it, I've just finished editing a video from last weeks visit to Marshall Smart and i'm talking about your injector tester, we had to put an injector back in the block to loosen the top cap and I was trying to explain to Marshall about the metal box yours sits on with the two studs and hole to ease the loosening of caps and nozzles, when you do your injector vid could you give us a quick walk around the box it sits on, please. many thanks Lance Barry
G Day Barry, Yes Ill will do a show and tell on the injector tester for sure, it's out on the bench already so it won't be too hard at all. Hes handy so Im sure he could knock one up easily.
I use that Aluminium composite panel on horse trailers and car trailers. I buy it through SAS. They are national wide and about $80 a sheet. You can get them in every colour you can think of. Good product 👌 👍
Thanks for the info! I checked them out but I need to freight it from Brisbane so the freight cubes out so if I cant buy bulk my sign bloke is a better option for me.
@BundyBearsShed you should see the colour range available. All the spectums and gloss gold and silver would suit your plaques. I mean mirror finish chrome and gold. Hopefully it's helpful mate.
Hi Bundy A question - Where do you source the small plastic oil bottle from that you use often use when assembling parts etc? I have a similar one but don’t remember where or how I acquired it. Find the plastic bottle very useful and so much more convenient than an oil can. Have in the past used a Shearer’s hand piece oil bottle. Enjoy your videos - As I have two 82 mm bore TEA’s, one FE35 deluxe with 3 cyl Perkins, one dismantled FE35 petrol, an early Kubota 2402 DT with a 4 in 1, Kubota 1.8 tonne excavator, and finally an as new Apollo (Chinese) 40 hp with 4 in 1 it was so cheap it followed me home, surprisingly it does work well. Nearly forgot the two Ford 2N tractors and a Zetor 6245. One of the TEA’s is on club rego and used on Tractor Treks etc Cheers Stuart
The oil pots are a Pressol brand and I get them from Sparex. The Sparex part number is S.4243. I always thought a little Ford 2n or 8n etc would fit into my collection well.
I've got a Massey Ferguson 30 D and the only thing wrong is it has a couple of bosses busted out under the dash. Which makes it impossible to steer. I want to weld some studs into the bosses. What do ya think?
I look forward to your stews every Tuesday. Thanks
Awesome! Thank you!
Nice signs Lance, no 2 is the go. $120 for 8 x 4 sheet seems very reasonable, initially I thought that was for a A4 size piece. Nice stew, thanks, enjoy your week.
Totally agree this stuff in nice and cheap and very easy to work with.
Great stew Lance. Good to see that the planning for the rally has already started. It is always good to have a look around the shed and surrounds in the videos. $ 35 per night for facilities such as you describe seems reasonable to me but we are always looking for something a little cheaper. Good luck.
Thanks 👍 I might do a drive around the ground video. The whole ground is quite impressive.
Great video loved the Ali sheet ,never seen it before. It would really quite a horse float down
Yes I think so too!
Great Stew Lance, great views from the shed! Good job with the signs, very tidy job! The MF20 bonnet and grill is coming along very nicely, will you replace the decals or not?
G Day Charles, Not at this stage, if I get to a full paint job I will but for now it is just a bit of a tidy up.
G Day Lance another great stew, you wouldn't believe it, I've just finished editing a video from last weeks visit to Marshall Smart and i'm talking about your injector tester, we had to put an injector back in the block to loosen the top cap and I was trying to explain to Marshall about the metal box yours sits on with the two studs and hole to ease the loosening of caps and nozzles, when you do your injector vid could you give us a quick walk around the box it sits on, please.
many thanks Lance
Barry
G Day Barry, Yes Ill will do a show and tell on the injector tester for sure, it's out on the bench already so it won't be too hard at all. Hes handy so Im sure he could knock one up easily.
I use that Aluminium composite panel on horse trailers and car trailers. I buy it through SAS. They are national wide and about $80 a sheet. You can get them in every colour you can think of. Good product 👌 👍
Thanks for the info! I checked them out but I need to freight it from Brisbane so the freight cubes out so if I cant buy bulk my sign bloke is a better option for me.
@BundyBearsShed you should see the colour range available. All the spectums and gloss gold and silver would suit your plaques. I mean mirror finish chrome and gold. Hopefully it's helpful mate.
@@mickwatson2177 yeah I had a look after you mentioned them, great range for sure.
Hi Bundy
A question - Where do you source the small plastic oil bottle from that you use often use when assembling parts etc?
I have a similar one but don’t remember where or how I acquired it.
Find the plastic bottle very useful and so much more convenient than an oil can.
Have in the past used a Shearer’s hand piece oil bottle.
Enjoy your videos -
As I have two 82 mm bore TEA’s, one FE35 deluxe with 3 cyl Perkins, one dismantled FE35 petrol, an early Kubota 2402 DT with a 4 in 1, Kubota 1.8 tonne excavator, and finally an as new Apollo (Chinese) 40 hp with 4 in 1 it was so cheap it followed me home, surprisingly it does work well.
Nearly forgot the two Ford 2N tractors and a Zetor 6245.
One of the TEA’s is on club rego and used on Tractor Treks etc
Cheers Stuart
The oil pots are a Pressol brand and I get them from Sparex. The Sparex part number is S.4243. I always thought a little Ford 2n or 8n etc would fit into my collection well.
@@BundyBearsShed Thank you for response
I've got a Massey Ferguson 30 D and the only thing wrong is it has a couple of bosses busted out under the dash. Which makes it impossible to steer. I want to weld some studs into the bosses. What do ya think?
Send a pic to bundybearsshed@gmail and Ill have a look.
I have a 175 Massey and the pto shaft doesn't turn. Could you tell me where to start troubleshooting it?
Look up at the front shaft and clutch through the inspection cover and go from there.